Product

Millimeter-Wave Noise Source, R-band, 26.5 to 40 GHz

R347B

-

Keysight Technologies

R347B - Keysight Technologies

The Keysight R347B noise source covers a 26.5 to 40 GHz frequency range. This waveguide noise source allows you to make accurate and convenient noise figure measurements on millimeter-wave devices. The R347B provides highly precise broadband noise at the input of the system or component under test. The noise figure meter then processes the ON/OFF ratio of noise power present in the system IF, and provides an accurate reading of noise figure and gain. The R347B noise source has remarkable ENR stability over time, which allows longer recalibration cycles and more accurate noise figure measurements.

Product

Industry Standard in Noise Measurement

PN9000

-

Eastern-Optx

PN9000 - Eastern-Optx

The PN9000 is a simple and fast Automatic Phase Noise Test System covering a very wide frequency range(2 MHz to 140 GHz). Its modular architecture allows optimum configuration, multiple measurement techniques and future growth in a compact instrument.

Product

Sound Level Meter for Automotive – Car Noise Emission Inspection

HD2010MCTC

-

Senseca

HD2010MCTC - Senseca

The level of noise produced by vehicles shall comply with standards prescribed by international regulations. During car inspections, horns and exhaust devices must be in good condition and comply with the requirements.

Product

Phase Noise Measurement Up To 125 GHz

S930321B

-

Keysight Technologies

S930321B - Keysight Technologies

S930321B enables phase noise measurements using a PNA or PNA-X vector network analyzer. Simplify your measurement workflow by measuring phase noise on the same connection as your network analysis measurement of 2-port active devices up to 125 GHz, without needing to connect a spectrum analyzer or harmonic mixer.

Product

Low Noise Amplifiers

-

Macom Technology Solutions Holdings Inc.

Macom Technology Solutions Holdings Inc.

MACOM low noise amplifier MMICs cover a frequencies from DC to 86 GHz operation for a wide range of applications, including network infrastructure, radar and communication systems. MACOMs portfolio of low noise amplifiers offer a broad array of noise figures, input IP3, and input power in bare die and a variety of package types. Offerings include wideband distributed topologies and self or actively biased configurations tailored to system design needs.

Product

USB TESTER, 3-9V, 3A, WHITE

72-13540

-

Tenma

72-13540 - Tenma

*USB tester inspects USB charger & portable power source*Lightweight and portable*LCD backlight*High/low output voltage warning*10 sets of data memory

Product

Minimal Signal Noise

SCSI Quiet Cables

-

Paralan Corp.

SCSI Quiet Cables - Paralan Corp.

Paralan Corporation was one of the first companies to recognize that 90% of the problems with SCSI Bus installations lie with the cables. To address this problem, Paralan developed its own line of high-quality shielded Quiet Cables.

Product

Low Noise Converter for Radio Amateurs

-

Kuhne electronic GmbH

Kuhne electronic GmbH

The concept of software defined radios (SDR's) is becoming increasing popular in both commercial, military and Amateur Radio circles. In their basic form, the use simple front end filtering followed by a Quadrature Sampling Detector (QSD) with the post detection processing done in software using the sound card found in PC's. Several popular kits have been developed to introduce Amateurs to the concept.

Product

Acoustic Noise

-

American Environments Co., Inc.

American Environments Co., Inc.

A Test Specimens can be evaluated in two different modes in reference to acoustic noise: The Test Specimen's response to acoustic noise and the Test Specimen's generation of acoustic noise.

Product

Phase Noise Analyzer

NXA-26

-

Eastern-Optx

NXA-26 - Eastern-Optx

This new NXA-26 is a sea-change in Phase Noise Test Systems. Making both residual and absolute noise measurements out to 26.5 GHz, this self-contained instrument uses either internal or external references with cross correlation for maximum dynamic range. The NXA-26 combines over 25 years of Phase Noise Measurement Technology with an easy to navigate user interface. System operation requires minimal training that will have you making measurements in minutes.

Product

Noise Consultants Assessment System With 1/1 & 1/3 Octaves Class 1

01NK111/112

-

Castle Group Ltd.

01NK111/112 - Castle Group Ltd.

This Noise Assessment System can be configured to your exact requirements, making it the ideal product for Noise Consultants who perform a wide variety of noise assessments for industrial and environmental noise.

Product

Noise Dosemeter

Castle GA257B

-

Castle Group Ltd.

Castle GA257B - Castle Group Ltd.

The SONUS Pocket Dosemeters are designed to be powerful and easy to use. These dosemeters are small and tough so measurements and data can be collected throughout the working period. Data can be reviewed on screen or downloaded to a PC for further analysis. The SONUS GA257B is a dedicated basic dosemeter fully compliant with IEC 61252:1993 and IEC 61672-1:2013, giving simultaneous sound exposure (Lep'd) and maximum peak (Zpeak) measurements, an essential feature for Noise at Work Regulations assessments.

Product

Low Noise Amplifier

-

R&K Company Ltd.

R&K Company Ltd.

R&K’s Low Noise Amplifier (LNA) series products are a type of small signal amplifiers but with excellent noise figure. LNA is designed to significantly minimize additional noise to be introduced inside the product, and capable to amplify the input RF signal to the required level with minimal impact from noise on output RF signal.

Product

Low Phase Noise Amplifier

-

RF-LAMBDA Inc.

RF-LAMBDA Inc.

RF Lambda’s lower phase noise amplifier offerings include special power supply conditioning and utilize technology to reduce the phase noise addition from amplifying the signal. Hermetically sealed options are available upon request.

Product

Line Noise and Vibration Test Systems

-

Alta Solutions, Incorporated

Alta Solutions, Incorporated

The sound and vibration characteristics of your product can be used to identify many common mechanical and assembly defectives.

Product

Small Device Noise Emission Test System

-

ViAcoustics

ViAcoustics

The Small Device Noise Emission Test System from VIacoustics is a turnkey solution for the measurement of noise emissions of small devices typically used in computers, consumer electronics, appliances and automobiles. The system includes all hardware and software necessary (see the components tab) for the determinations of sound power levels (1/3 octave band and A-weighted), emission sound pressure levels (normalized 1/3 OB, A-weighted and high resolution FFT) and *ISO 532B loudness. The system is designed to be operated by a technician for production level testing or to be used by an engineer in the product development process.

Product

Noise Monitoring Kit

NMS044 SoundAdvisor

-

Larson Davis, Inc.

NMS044 SoundAdvisor - Larson Davis, Inc.

Larson Davis has created a new standard for portable noise monitoring systems by making the SoundAdvisor Kit Model NMS044 completely wireless with solar charging and 4G wireless while keeping it truly portable. The SoundAdvisor noise monitor includes everything needed for a noise monitor (powered by SoundAdvisor Model 831C Class 1 sound level meter) that can run indefinitely while remaining connected to the Internet making your meter and your data always readily available.

Product

Low Noise Accelerometer Cables & Coaxial Sensor Cables

-

Kemo

Kemo

Our cable assembly team in the UK produce the highest quality cable assemblies for use with a wide range of sensing and measurement applications. By making the cable assemblies in our own factory we are able to ensure the quality of every connection and every assembly, each cable is fully tested and its capacitance checked. Due to our experience in signal conditioning we understand the critical elements to quality signal analysis, this includes the correct cable. This is particularly true for accelerometer cables and sensors cables which can introduce significant noise issues if not used correctly.

Product

Particle Impact Noise Detection (PIND) Test

-

Aero Nav Laboratories, Inc.

Aero Nav Laboratories, Inc.

This test detects the presence of free moving particulate contaminants within sealed cavity devices. This test is specifically directed toward relays and other devices where internal mechanism noise makes rejection exclusively by threshold level impractical. This test method also may be used prior to final sealing in the manufacturing sequence as a means of eliminating loose particles from the interior of the device.

Product

Noise Nuisance Recorder

Trojan2

-

Cirrus Research plc

Trojan2 - Cirrus Research plc

The Trojan2 Noise Nuisance Recorder was designed in conjunction with Local Councils, Environmental Health Officers and Housing Associations to allow you to easily measure, monitor and record noise nuisance.

Product

Impulse Noise Simulators

INS Series

-

Noise Laboratory Co.,Ltd.

INS Series - Noise Laboratory Co.,Ltd.

A simulator to reproduce fast rise-up noises which are generated when switching ON / OFF electric current on the inductive load. It can be used for performance evaluation of electronic equipment upon reproduction of line noises which are intruded to the power supply lines or induced noises onto the telecommunication lines.

Product

High Power Noise Sources

NS-7001

-

Innovative Technical Systems

NS-7001 - Innovative Technical Systems

The NS-7001 is high-power noise source specifically designed to operate in the 2.11-2.17 GHz UMTS band. It features flat output power that is regulated over a wide temperature range with high rejection outside the operating band of interest. Logic control is provided to enable/disable the noise source and an internal BIT function continuously monitors the output power. Other frequency bands and power levels are available.