Product

Noise Meters

-

PCE Instruments

PCE Instruments

Here you will find a full range with an industrial standard noise meter / sound meter to suit every requirement. With the portable noise meter you can carry out measurements quickly to gain control of a situation or to set the sound meter to take timed measurements. The noise meter is important for all industries, especially by using it as a mobile noise meter which is able to assess office stress levels or street noise levels. Often problems arise from noisy neighbors or if bars and restaurants are in residential areas and produce noise levels after 10 pm in excess of what local laws permit. A noise meter / sound meter will help here.We can assess which noise meter or sound meter you require in relation to the issue you have and the relating laws (requirements regarding a sound meter and a sound meter’s usage vary depending on the country). We also have noise meter microphone extension cords, tripods, sound meter calibrators and calibration certificates for most noise meter models.

Product

Low Noise Op Amplifiers (≤ 10nV/√Hz)

-

Analog Devices Inc.

Analog Devices Inc.

Analog Devices’ portfolio of low noise (≤ 10nV/√Hz) op amps includes many amps with the lowest noise performance in the industry. These high speed, low distortion (1 nV or less) op amps enable better signal fidelity in the most demanding conditions, allowing system designers to achieve the lowest total system noise performance in applications with high source impedances. We feature a considerable variety of these amps with wide supply ranges and low power.

Product

White Light LED Illumination System

pE-300lite

-

CoolLED Ltd.

pE-300lite - CoolLED Ltd.

CoolLED's pE-300liteis a simple white light LED illumination system that offers intense, broad-spectrum LED illumination for imaging most common fluorescent stains. The pE-300lite Light Source can be fitted directly to the microscope or specified with a liquid light guide. The system is a mercury-free alternative that is safer, more controllable, and repeatable than conventional high-pressure gas discharge illuminators. Spectral coverage is from the UV (DAPI excitation) to the Red region (Cy5 excitation). The system is perfect for hospital and regular research laboratory environments and is affordable within consumables budgets.

Product

Sound Level Meter - For Workplace And Environmental Noise

SONIK-SE

-

Castle Group Ltd.

SONIK-SE - Castle Group Ltd.

The SONIK-SE is a powerful sound level meter which is ideal for performing occupational and environmental noise assessments for a variety of applications.

Product

Noise Activated Warning Signs

-

Castle Group Ltd.

Castle Group Ltd.

Signs within the workplace that warn of high noise levels are common place as they help ensure that employees, visitors and the public are aware and, if required, wearing ear protectors. This type of signage is ideal when noise levels are stable and consistent.

Product

Noise Sources

-

Norsonic AS

Norsonic AS

This power amplifier ensures that you get the maximum sound pressure level out of the Norsonic range of speakers.

Product

Low Noise Amplifier (DC Powered)

-

RF-LAMBDA Inc.

RF-LAMBDA Inc.

RF Lambda’s DC low noise amplifiers (LNA) are broadband and offer low noise figure high IP3. Hermetically sealed options are available upon request.

Product

USB Smart Noise Source, 500 MHz To 50 GHz, 5 DB ENR Nominal

U1832C

-

Keysight Technologies

U1832C - Keysight Technologies

The USB-powered (USB TMC compliant) U1832C provides broadband noise figure measurements from 500 MHz – 50 GHz with modular signal analyzer, benchtop X-Series signal analyzers and Fieldfox

Product

TriaxM-TriaxM, Low Noise Triaxial to Triaxial Cable for SMUs, 1 m

785659-01

-

NI

785659-01 - NI

The TriaxM-TriaxM Triaxial Cable connects your system to PXI Source Measure Units and other devices that have a triaxial connector. It uses guarding to remove the effects of leakage current and parasitic capacitance when … measuring very low current signals. The cable offers 300 V DC maximum voltage, 3 A maximum continuous current, 10 A maximum pulsed current, and different lengths.

Product

Acoustic Noise Generator

ANG-2200

-

Research Electronics Intl.

ANG-2200 - Research Electronics Intl.

The ANG-2200 Acoustic Noise Generator creates a perimeter of noise that defeats acoustic leakage eavesdropping devices including wired microphones inside walls, contact microphones, audio transmitters located in AC outlets, and laser/microwave reflections from windows.

Product

High-Current, Ultra-Low Noise Filter, 21 V / 500 MA, 10 Ω

N1298A

-

Keysight Technologies

N1298A - Keysight Technologies

The N1298A Series is a collection of low noise filters for the Keysight B2960 Series 6.5-digit low noise source.

Product

Low Noise Amplifier

-

Corech Microwave Limited

Corech Microwave Limited

Corech Microwave’s Low Noise Amplifier(LNA) frequency ranges from 1kHz to 67 GHz, featured with ultra low noise figure, high gain and compact size. Narrow-band & wide-band ready modules are available. Output power from +1dBm to +18dBm. 2.92mm – F, PIN, and SMA – F connector options are available.

Product

Low Phase Noise Amplifiers

-

Pasternack Enterprises, Inc.

Pasternack Enterprises, Inc.

Pasternack's low phase noise amplifiers cover select frequency bands ranging from 1.5 to 18 GHz with residual phase noise levels as low as -180 dBc/Hz @ 10 KHz offset. Additional performance specs include small signal gain ranging from 9 to 14 dB, with typical noise figure of 5.5 dB. Psat levels for these amplifiers range from +16 to +25 dBm with Output IP3 levels as high as +34 dBm. All models feature single DC voltage supplies and input/output RF ports are internally matched for 50 ohms with DC blocking capacitors. These compact module assemblies require no external components and are available in rugged Kovar metal drop-in packages that are gold-over-nickel-plated and support field replaceable SMA connectors. All models are EAR99 and guaranteed to meet MIL-STD-883 test conditions for hermeticity and temperature cycle.

Product

Noise and Vibrations Meters

Vibrating Hand Arm

-

PASI srl

Vibrating Hand Arm - PASI srl

Monitoring / Noise and vibrations meters

Product

Noise Source Family

347

-

Keysight Technologies

347 - Keysight Technologies

The R347B waveguide noise source cover the R-band (26.5 to 40 GHz frequency range), while the Q347B model cover the Q-band (33 to 50 GHz frequency range), allows you to make accurate noise figure measurements on millimeter-wave devices.

Product

Phase Noise Testing

-

Precision Test Systems Ltd.

Precision Test Systems Ltd.

The systems are based in the UK although testing for any company world wide will be undertaken.

Product

Noise Source Test Set, 10 MHz to 26.5 GHz

N2002A

-

Keysight Technologies

N2002A - Keysight Technologies

The N2002A noise source test set is a low cost, stand-alone instrument that, as part of a calibration system, enables fast, repeatable calibrations with minimal levels of uncertainty.

Product

Phase Noise Measurement Up To 70 GHz

S930317B

-

Keysight Technologies

S930317B - Keysight Technologies

S930317B enables phase noise measurements using a PNA or PNA-X vector network analyzer. Simplify your measurement workflow by measuring phase noise on the same connection as your network analysis measurement of 2-port active devices up to 70 GHz, without needing to connect a spectrum analyzer or harmonic mixer.

Product

Low Noise Voltage Preamplifier

1201

-

DL Instruments, LLC

1201 - DL Instruments, LLC

The Model 1201 Voltage Preamplifier with Remote Gain Programming Option (06) is usable in both computer controlled and maual applications requiring uncompromising performance.

Product

Ultra-Low Noise, Precision Voltage Reference

ISL21090

-

Renesas Electronics Corp.

ISL21090 - Renesas Electronics Corp.

The ISL21090 is an ultra-low noise, high DC accuracy precision voltage reference with a wide input voltage range. The ISL21090 uses Renesas' advanced bipolar technology to achieve sub 1.0µVP-P (1.25V option) 0.1Hz to 10Hz noise with an initial voltage accuracy of 0.02% (2.5V option).

Product

High Power White Light LED Light Sources

LS-HP1

-

lightsource.tech GmbH

LS-HP1 - lightsource.tech GmbH

The LS-HP1 is a series of high-power, high brightness light sources for liquid light guides (LLG). It is characterized by its outstanding luminance and thus delivers very high light output from liquid light guides.The LS-HP1 works with the latest generation of high-power LEDs with up to 100W power from an area of less than 15mm² and is significantly brighter than a conventional halogen light bulb with 150W. The LS-HP1 is available for liquid light guides with core diameters of 3 or 5mm.

Product

Noise & Vibration Measurement Systems

BK8600

-

BaKo Co., Ltd

BK8600 - BaKo Co., Ltd

Rotation can produce noise and extraneous vibration for any number of reasons and could cause wear, discomfort, or other problems. The BK8600 series of testers are specially designed to test for these.

Product

Dual Channel Noise Dosimeter

SV 102+

-

SVANTEK Sp. z o.o.

SV 102+ - SVANTEK Sp. z o.o.

The SV102 + is our latest dual-channel noise dosimeter and replaces our ground breaking SV102. It has been designed for the accurate measurement of noise exposure to ISO 9612 and MIRE (microphone in real ear) measurements to ISO 11904-1.