Product

Active Noise Cancellation

-

ams-OSRAM AG

ams-OSRAM AG

ams analog and digital Active Noise Cancellation (ANC) solutions deliver class leading ambient noise reduction, significantly improving sound quality for portable consumer devices.

Product

1/2.5" 5.0 MP Low Noise USB Camera (Color)

See3CAM_CU55

-

e-con Systems Inc.

See3CAM_CU55 - e-con Systems Inc.

See3CAM_CU55 is a 5.0MP USB3.1 Gen1 UVC Color Camera with S-mount (also known as M12 board lens) lens holder. It is a two-board solution containing camera sensor board based on 1/2.5" AR0521 image sensor from ON Semiconductor and USB3.1 Gen 1 Interface board. The powerful on-board Image Signal Processor (ISP) brings out the best image quality of this 2.2micron pixel 5MP AR0521 CMOS image sensor making it ideal for next generation of high resolution surveillance, biomedical instruments and biometric authentication applications.

Product

Small, High Performance InGaAs Camera With Low Noise And High Dynamic Range

Wildcat 640 Series

-

Xenics

Wildcat 640 Series - Xenics

The Wildcat 640 series is based on an in-house developed, temperature stabilised InGaAs detector with a 640 x 512 pixel resolution. The Wildcat 640 cameras are offered with high frame rate of up to 220 Hz. The camera comes with a CameraLink or USB3 Vision interface and features low weight and power.

Product

Sound Level Meter For Occupational Noise

SONIK-S

-

Castle Group Ltd.

SONIK-S - Castle Group Ltd.

The SONIK-S helps you protect your workforce from over exposure to noise, and helps you ensure your company is complying with The Control of Noise at Work Regulations 2005.

Product

Phase Noise Generator / Calibrator

PNG-A

-

Noise eXtended Technologies S.A.S.

PNG-A - Noise eXtended Technologies S.A.S.

The PNG-A is a high precision generator used in Test and Measurement instruments calibration. It is a Signal Generator with precisely computed phase and amplitude noise characteristics. With its wide frequency offset range, 1Hz to 1 MHz offset, and its programmable Phase and Amplitude noise in real time, this is the ideal standard to calibrate phase noise analyzers, Signal Source Analyzers and Spectrum Analyzers.

Product

Environmental Noise Monitors

-

Cirrus Research plc

Cirrus Research plc

Our noise monitoring equipment is used across a wide range of applications and location. Each of these systems has been designed to meet the exact needs of the user by combining noise monitors with a software and support package.

Product

Low Noise Amplifier

-

Corech Microwave Limited

Corech Microwave Limited

Corech Microwave’s Low Noise Amplifier(LNA) frequency ranges from 1kHz to 67 GHz, featured with ultra low noise figure, high gain and compact size. Narrow-band & wide-band ready modules are available. Output power from +1dBm to +18dBm. 2.92mm – F, PIN, and SMA – F connector options are available.

Product

Low Noise Dual Band VCO

-

Teledyne RF & Microwave

Teledyne RF & Microwave

This custom oscillator subassembly consists of two low noise oscillators covering 1.5 to 2.5 GHz, a power combiner, a standard Teledyne RF & Microwave amplifier, and a lowpass microstrip filter. Teledyne RF & Microwave designed both oscillators for low phase noise and linear tuning. The output frequency bands are switched using standard TTL control.

Product

Industry Standard in Noise Measurement

PN9000

-

Eastern-Optx

PN9000 - Eastern-Optx

The PN9000 is a simple and fast Automatic Phase Noise Test System covering a very wide frequency range(2 MHz to 140 GHz). Its modular architecture allows optimum configuration, multiple measurement techniques and future growth in a compact instrument.

Product

Low Noise Amplifier

DLNA8-40-50-2582

-

COM-MW Co., Ltd.

DLNA8-40-50-2582 - COM-MW Co., Ltd.

Low Noise Amplifier, Frequency 40~50GHz, Gain 38dB, Noise figure 3dB, P-1dB 13dBm, 1.85mm-Female Removable

Product

Noise and Vibration Testing

-

Electronic Systems of Wisconsin, Inc.

Electronic Systems of Wisconsin, Inc.

ESW's unique Noise & Vibration Test Systems come fully equipped with the latest industry features. The on-screen operator display in our testers make it easy to set-up, read, track and record your noise or vibration information. We work directly with you to determine the best solution that will work for your application. Our data logging make sure that important data is stored and available for download for future reference. ESW's design engineers work to make sure the testing interface is easy for your operators to use. We work closely with our customers to make sure that your unique testing needs are met. Please see the slideshow below to see some of our Noise & Vibration Testers.

Product

Broadband Amplified Noise Modules

NC2000/4000 Series

-

Noisecom

NC2000/4000 Series - Noisecom

The NC2000 Series amplified noise modules are an excellent choice for high-level noise modules mounted on a circuit board. The NC2000 Series modules are housed in 24, or14-pin dual-inline packages. The NC4000 series modules are housed in a 40-pin module that cover similar noise bands to the NC2000, but have higher crest factor, and 60 dB of TTL controlled attenuation.

Product

Noise & Interference Generator

GPS7500

-

Noisecom

GPS7500 - Noisecom

The programmable GPS7500 Noise & Interference Generator is capable of generating up to a 40 MHz wide noise or interference band for GPS receiver susceptibility testing.

Product

Noise Board

332D-11 VG

-

Tech-Aid Products

332D-11 VG - Tech-Aid Products

This printed circuit board was designed to original specifications and contains OEM specified parts. This board is required for testing the 332D-11 series gyros. Also contained on board is the Method A type calibration and sample and hold circuits required to perform the calibration of the noise circuits.

Product

Precision Calibrated Noise Sources

-

ELVA-1

ELVA-1

ELVA-1's calibrated noise source ISSN-XX series delivers a uniform level of noise power spectral density within the whole waveguide frequency range. Sources are available in eight waveguide bands covering 26.4-170 GHz.

Product

Phase Noise Measurement Up To 125 GHz

S930321B

-

Keysight Technologies

S930321B - Keysight Technologies

S930321B enables phase noise measurements using a PNA or PNA-X vector network analyzer. Simplify your measurement workflow by measuring phase noise on the same connection as your network analysis measurement of 2-port active devices up to 125 GHz, without needing to connect a spectrum analyzer or harmonic mixer.

Product

White Light Continuum Generator

JIBE

-

Del Mar Photonics, Inc.

JIBE - Del Mar Photonics, Inc.

A powerful coherent light source. Due to its amazing wide spectral band, the white light continuum is being applied in different areas such as optical parametric amplification, optical metrology, optical coherence tomography, materials characterization, etc.

Product

Low Phase Noise Amplifiers

-

Analog Devices Inc.

Analog Devices Inc.

Low Phase Noise amplifiers are critical for many applications requiring high signal integrity. This is especially relevant in instrumentation, defense, and telecommunication applications where low phase noise amplifiers are becoming increasingly important as the oscillators improve. Phase noise is described as the close-in noise to the carrier that can often appear as jitter on a clock signal. Analog Devices offers a large portfolio of low phase noise amplifiers to meet a variety of requirements in the LO network, receiver, as well as in the transmitter. Our portfolio supports a wide range of power levels and frequencies to provide the right solution for the given application.

Product

Whiteness Meter

-

Bestone Industrial Ltd.

Bestone Industrial Ltd.

Widely used in Floor maintenance, Surface cleaning quality control, Stone and tile gloss measurement, Checking printed matter, Quality control of paint and ink, Polished metal surface ,measurement (chrome plating), Inspection of paint protection and waxing, Auto-body paint inspection, Surface inspectionof plastic moldings, Evaluation of detergents and washers, Checking masonry and washers, Checking building exteriors.

Product

Phase Noise Testing

-

Precision Test Systems Ltd.

Precision Test Systems Ltd.

The systems are based in the UK although testing for any company world wide will be undertaken.

Product

Noise Consultants Assessment System With 1/1 & 1/3 Octaves Class 1

01NK111/112

-

Castle Group Ltd.

01NK111/112 - Castle Group Ltd.

This Noise Assessment System can be configured to your exact requirements, making it the ideal product for Noise Consultants who perform a wide variety of noise assessments for industrial and environmental noise.

Product

Noise Control And Acoustical Consulting Services

-

Power Acoustics, Inc.

Power Acoustics, Inc.

Our acoustical consultants use the latest and most advanced noise prediction and modeling software, precision sound measurement equipment and detailed acoustical analysis that enable us to help our clients achieve their project's noise requirements and goals. Contact us before your noise challenges become noise pollution problems.

Product

Calibrated Noise Sources

-

Pasternack Enterprises, Inc.

Pasternack Enterprises, Inc.

Calibrated Noise Sources by Pasternack

Product

Low Noise Amplifier

1010

-

Dexter Research Center, Inc.

1010 - Dexter Research Center, Inc.

A low noise, DC-coupled amplifier is packaged in a rugged, die-cast aluminum case with BNC connectors enabling input and output. Provides very low voltage noise and current noise in the critical region of 0.1 Hz to 10 Hz making this the ideal amplifier for thermopile detectors in sensitive systems design and laboratory experiments.