Product

Lithium Battery Equalization Tester

LIFG-NT

-

Fuzhou Fuguang Electronics Co., Ltd.

LIFG-NT - Fuzhou Fuguang Electronics Co., Ltd.

The LIFG-NT series adopts the latest charging maintenance test technology to detect and equalized charge the lithium battery. It is suitable for daily charging and maintenance of lithium battery packs. The wide voltage design can be applied to all current voltage levels of lithium battery tests.

Product

1584W to 2500W - Single Output

HFE Series

-

TDK-Lambda Corp.

HFE Series - TDK-Lambda Corp.

*1U rackmount containing up to 5 units*Up to 29.2W/in³ power density*Internal ORing MOSFET & Current Share*High Efficiency*Up to 9,500W in 1U rack*PMBus™(I2C) and LAN options

Product

Standard CT

800A

-

Eltel Industries

800A - Eltel Industries

• High accuracy of 800/5A (0.05%) • multiple ratios • Various Current ratings

Product

Digital Colorimeter & Illuminance Meter

CHC-I

-

Lisun Electronics Inc.

CHC-I - Lisun Electronics Inc.

This Digital Color Meter & Illuminance Meter is based on all digital integral photometric and colorimetric measurement technology. It has no analogue unit, thus it is very simple to overcome the zero drift which is impossible to be avoided in current colorimeter. The digital X (λ), Y (λ), Z (λ) sensor has large dynamic range so that there is no range-changing error in it; moreover, it possesses strong anti-interference ability and high accuracy. The CHC-I contains internal RS232 computer interface, the calibration is done by software. It is suitable for monitoring and remote applications. The CHC-I software can calibrate the instrumentation, sample the data through RS232 interface and print out the results. It can also be calibrated by other standard light sources to obtain very high measuring accuracy of x, y color coordinate and color temperature. It is a real-time measuring system and run under Windows System. 128*64 lattice LCD display, RS232 computer interface and software, Data hold function.

Product

Audio Frequency Transmitter

TG 600

-

BAUR

TG 600 - BAUR

Cable fault location with the BAUR TG 600. The TG 600 audio frequency transmitter was designed specifically for the precise location of cable faults and joints using the twist method. The display of the input and output current makes selection of the correct adjustment easier.* High-performance audio frequency transmitter up to 600 VA* Frequency of 2 or 10 kHz, quartz-stabilised (other frequencies on request)* Potential-free output* Impedance adjustment in 8 steps from 0.3 to 300 Ω

Product

Data Loggers,

-

Chipkin Automation Systems

Chipkin Automation Systems

Reported – Current values and status are displayedTrended – A set of recent readings are displayed on a rendered chart. The number of sample and other parameters are configurable.Logged – Data is time stamped and appended to log files on a FIFO basisArchived – Real time data is appended to archive files which are zipped to save space. Many configurable parameters.Served to the Web – Using JSON, HTTP , data push services are provided. Data can be pushed from site to www.Served to the Enterprise – Using XML and other enterprise protocols.Provide Visualization – Complex web based GUI is provided. Objects can be animated with live data.

Product

Earth Fault Detector

K-3838

-

Kongter Test & Measurement Co., Limited

K-3838 - Kongter Test & Measurement Co., Limited

Kongter’s K-3838 earth fault detector is the updated model which is developed to fast detect, trace and pinpoint virtual grounding faults on LIVE DC systems where electrical cables have breakage and current lost to ground. It will save you from long time unnecessary troubleshooting and helps to increase the reliability of your electrical equipments. Our unique technique makes it safe and fast to handle earth fault in DC systems that are working online.

Product

Low Noise Amplifier

1010

-

Dexter Research Center, Inc.

1010 - Dexter Research Center, Inc.

A low noise, DC-coupled amplifier is packaged in a rugged, die-cast aluminum case with BNC connectors enabling input and output. Provides very low voltage noise and current noise in the critical region of 0.1 Hz to 10 Hz making this the ideal amplifier for thermopile detectors in sensitive systems design and laboratory experiments.

Product

Action Counter Tester

-

Weshine Electric Manufacturing Co., Ltd

Weshine Electric Manufacturing Co., Ltd

Lightning strike counters of lighting arrester measure lightning strikes by the induction of current and do not require the use of any external power source. Weshine invented Lightning-strike-counter Tester (VS-451) is used of verify that if strike counter is correctly mounted and connected. As well as output current with sensitivity of 0.01 mA to correct leakage ammeter.

Product

Three Phase Power Sources

PS3

-

MeterTest Ltd.

PS3 - MeterTest Ltd.

The PS3 three phase power source was designed to provide a stable alternating current and voltage source for three phase electricity meter test equipment.

Product

Clamp Meters

-

Di-Log

Di-Log

Our clamp meters measure both high and low AC and DC currents as well as earth leakage and earth resistance. With variable jaw sizes, max current readings up to 2000A AC/DC and features including TRMS, data logging and temperature readings we have clamps suitable for a wide range of electrical applications.

Product

PCI-X Carrier For AMC Modules

PCI102

-

Vadatech Inc

PCI102 - Vadatech Inc

The PCI102 allows testing of AMC.1, AMC.2 and AMC.3 modules in a PC environment during development and manufacturing; reducing the costs associated with maintaining different platforms. The PCI101 is a PCI-X edge style carrier with PCIe x4 lanes going to the AMC module. The AMC.1 module connects to the host PC’s PCI-X bus via a PCI-X to PCI ebridge. The AMC.2 module’s GbE ports are routed to RJ-45s. The AMC.3 differential pairs are routed to two SATA connectors. ThePCI102 is available with an optional VT001 IPMI controller which can test the AMC IPMI management functionality. The dual I2C bus connectors allow for connecting any I2C bus to any other I2C bus as well as being able to debug and monitor the I2C bus traffic. Provides two current sense resistors to measure the payload power as well as the management power of the AMC. The PCI102 can be powered on the bench without the host PC.

Product

Functional Test

Wayne Kerr

-

Terotest Systems Ltd.

Wayne Kerr - Terotest Systems Ltd.

These popular test systems offer a wide range of 'plug and play' test modules to satisfy most requirements. They were developed primarily for automotive test applications and as such are available with high current and high voltage as well as digital test capabilities.

Product

Package Level Test

-

Chroma ATE Inc.

Chroma ATE Inc.

Applicable for burn-in, reliability andlife testingACC and APC control modesIndividual channel driving and measurementDriving current 500mA per channel

Product

Clamp Meter

-

Shenzhen Graigar Technology Co.,Ltd.

Shenzhen Graigar Technology Co.,Ltd.

A clamp meter is an electrical tester that combines a basic digital multimeter with a current sensor. Clamps measure current. Probes measure voltage.

Product

Isolated Digital Expansion Board

MSXB 078

-

Microstar Laboratories, Inc.

MSXB 078 - Microstar Laboratories, Inc.

The Microstar Laboratories Isolated Digital Expansion Board, part number MSXB 078, provides isolated digital expansion for Data Acquisition Processor (DAP) systems. Use these boards to eliminate ground currents – a potential source of noise in your measurement and control signals – and eliminate timing errors from high-channel count digital I/O.

Product

Sensor String System Flexible Subsea Observatories

SeaGuard Sensor String

-

Aanderaa Data Instruments AS

SeaGuard Sensor String - Aanderaa Data Instruments AS

The Aanderaa SEAGUARD® Sensor String Systems are complete and flexible subsea observatories for measurements of e.g. dissolved oxygen, conductivity, temperature, current, pressure and tide.