Product

4500~6000W DC Electronic Loads

JT634 Series

-

Nanjing Jartul Electronic Co., Ltd

JT634 Series - Nanjing Jartul Electronic Co., Ltd

JT634 series electronic load is functioned with 500KHz high-speed synchronous sampling, DSP technology, powerful dynamic test and multi-aspect intelligence analysis. All these are fully integrated into auotmatic test function, which makes JT634 series load very suitable for testing power supply when produced in large quantity. Besides, JT634 series load also possesses the features of current rising slew rate programmable, high-speed dynamic loading and programmable list function, which makes JT634 series load satisfing most of R&D requirements. Moreover, JT634 series load’s special parallel operation method can satisfy the synchronous loading requirements of multi-channels output power supply and satisfy single-channel output power supply requirement for big power.

Product

Clamp Meter, Auto, True RMS, 1 kA AC, 600 V AC, 600 V DC

72-9485

-

Tenma

72-9485 - Tenma

A professional digital clamp meter that is perfect for any industry. Measures AC/DC voltage, AC/DC current, Resistance, and Frequency.

Product

5 ½ Digits Dual-Display Digital Multimeters

SDM3055

-

SIGLENT Technologies

SDM3055 - SIGLENT Technologies

The SIGLENT SDM3055-SC includes a multiplexer that provides multi-point measurement capabilities. The scanner features 12 multi-purpose + 4 current channels and supports the following measurement functions: DCV, ACV, DCI, ACI, 2WR, 4WR, CAP, FREQ, DIODE, CONT and TEMP (RTD and Thermocouple ). It provides a convenient and versatile solution for test applications that require multiple measurement points or signals and is an ideal tool for R&D burn-in and production testing.

Product

8 Mega Pixel Auto Focus MIPI Camera Module

e-CAM80_MI8865_MOD

-

e-con Systems Inc.

e-CAM80_MI8865_MOD - e-con Systems Inc.

e-CAM80_MI8865_MOD is a 8 MP Autofocus MIPI RAW camera module based on Ominivision's OV8865 CMOS image sensor. The 1/3.2-inch OV8865 is a low-power high-performance color CMOS Image Sensor featuring an improved 1.4-micron with BSI technology. OV8865 is already a proven sensor in the market with dynamic range and reduced dark current that enables superior high and low light image capture. Note: You would require an external ISP to process the data. Contact us to purchase the ISP.

Product

Clamp type AC Current Sensor／for Leakage Current Measurements(ZCT Series)

ZCT-30

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

ZCT-30 - MULTI MEASURING INSTRUMENTS Co., Ltd.

*Leakage current measurements of feeder*Compact size*AC 1mA～100A

Product

Portable Power Quality Analyzer

PDA 1252

-

Electro Industries/GaugeTech

PDA 1252 - Electro Industries/GaugeTech

The PDA 1252 is a portable power quality analyzer designed to monitor, isolate and troubleshoot power system disturbances. Using our advanced analysis software, the Communicator EXT application, view real time data presented in a simple and powerful format. Maximize the Communicator EXT application's power with the optional AiReports to generate disturbance solutions and advanced power reports. The unit is ideal for load surveys, program, monitoring transformer banks and indoor/outdoor electrical monitoring. The PDA 1252 Power Quality Analyzer is mounted in its own watertight carrying case and uses watertight connectors to connect voltage and current leads. Based on the Nexus 1252 platform, the PDA 1252 is easy to use and operate.

Product

Logarithmic Transimpedance Amplifiers

-

Analog Devices Inc.

Analog Devices Inc.

Analog Devices translinear logarithmic amplifiers utilize advanced translinear techniques to provide an exceptionally large dynamic range in a versatile and easily used form. Our portfolio relies on proprietary innovations in design and precision laser trimming to achieve the wide measurement range and accuracy in products such as the AD8304 and AD8305. ADI translinear logarithmic amps are used in a variety of applications including optical power measurement, wide range baseband logarithmic compression, the measurement of current and voltage ratios, and optical absorbance measurements.

Product

BAW Devices

-

Teledyne RF & Microwave

Teledyne RF & Microwave

Teledyne’s Bulk Acoustic Wave (BAW) Product Line has been producing BAW delay devices since the early 1960’s. Over the years, Teledyne Microwave Solutions (TMS) has constantly improved BAW technology and is currently the world’s only supplier of microwave bulk acoustic wave delay devices. Markets for BAW devices include instrumentation and radar altimeters and are available in connectorized, pin and surface mount configurations.

Product

SP1T RF Pin Diode Switches To 18 GHz

-

Pulsar Microwave Corporation

Pulsar Microwave Corporation

Pulsar Microwave manufactures pin diode RF switches that are controlled by TTL logic. This configuration is known as single pole, single throw and is often abbreviated SPST or SP1T. They have been engineered to function in 50-ohm systems, and are designed to operate from 40 MHz to 18 GHz. They have a switching time of 100 nanoseconds and input power rating of 200 mW (23 dBm). Performance of 1.6:1 or better VSWR and minimum isolation of 60 dB is typical of most models.All switches of this type require both +5VDC and -5VDC to operate. Typical current consumption is +/- 30 mA. TTL control logic of 0 to +5VDC is required. Units comes standard with SMA connectors.

Product

Digital Panel Meter

VAW

-

Adtek

VAW - Adtek

VAW DC Multifunction Power Meter provide high accuracy measurement, display and communication of DC voltage, Current, Power, Energy(import / export), and Run Hour. They are also building in 4 Relay outputs, 1 Analogue output, 1 Pulse output , 2External Control Inputs and 1 RS485(Modbus RTU Mode) interface with versatile functions such as remote I/O, alarm and communication for DC power applications like as solar, wind power system or portable electronic device consumption testing.For the power saving, VAW has built in an innovation timer to switch down the light and power of LED. It makes sense to build the meter in a green power system.

Product

Three Phase Multifunction Static kWh Meter

SY 1065

-

Hong Kong Songyang Industrial Ltd.

SY 1065 - Hong Kong Songyang Industrial Ltd.

This kind of meter integrates many functions into one, realizes the functions of time-sharing electricity measurement for active double-direction, measuring demand, sinusoidal reactive, calculating power factor, displaying and tele-transmitting present voltage, current, power and load curve etc. and it realizes the function of recording all the missing voltage, missing current and the percent of pass for voltage,

Product

Near Field Probes 1GHz - 10 GHz

SX set

-

Langer EMV-Technik GmbH

SX set - Langer EMV-Technik GmbH

The SX1 set consists of 3 passive near field probes for making measurements in the development phase of E-field and magnetic field with a high clock frequency in the range from 1 GHz to 10 GHz. The probe heads of the set SX allow for measurements close to electronic assemblies, e.g. on single IC pins, conducting paths, components and their connectors, to localize interference sources. Field orientation and field distribution on an electronic assembly can be detected through trained use of the near field probe. The near field probes are small and handy. They have a sheath current attenuation and are electrically shielded. They can be connected to a spectrum analyzer or an oscilloscope with a 50 Ω input. They have an internal terminating resistance.

Product

Precision Shunt Resistors

PBV, PBH

-

RARA Electronics Corporation

PBV, PBH - RARA Electronics Corporation

High power low resistance values and high precision. Low temperature coefficient. Excellent load life stability. Excellent short time over load. Ideal for current sensing applications.

Product

Electrical Standards

-

Fluke Calibration

Fluke Calibration

To verify the performance of an electrical calibrator or dc calibrator, you need an electrical standard. Fluke Calibration standards are found in primary calibration laboratories across the world. A wide range of electrical standards and frequency standards are designed to meet the needs of today’s laboratories for traceability and quality accreditation while also being portable, simple to use, and easy to support. Electrical standards include: Voltage standards; ac/dc transfer standards; ac measurement standards; resistance standards; ratio standards; current shunts.

Product

3-Phase Current Meter With 3 X 75A Clamp-On CT

EVA-2210

-

Advantech Co. Ltd.

EVA-2210 - Advantech Co. Ltd.

LoRaWAN® wireless connectivity3 x 75A Clamp-On CTBattery life up till 3.5 years@25 °C, 60 mins interval settingEasy to deploy and maintain

Product

Quick and consistent Fastener/Rivet Flushness Measurements

fastCHECK®

-

8tree, LLC

fastCHECK® - 8tree, LLC

8tree's fastCHECK quickly, consistently and objectively measures the flushness of fasteners and rivets on aircraft.It is 10 times faster than the current industry standard and provides instant "go/no-go" results while being portable and wireless.

Product

Primary Current Injection Test Sets

-

T&R Test Equipment Ltd.

T&R Test Equipment Ltd.

Our primary current injection test sets cover from 750A through to 6000A. Available in single phase, testing applications include testing and timing of under and over current relays, circuit breakers and CT ratio testing.

Product

Primary Test Equipment

LET-1000-RD

-

EUROSMC, S.A.

LET-1000-RD - EUROSMC, S.A.

It allows to perform with sufficient power, all the primary current injections to test the proper function and wiring of all the elements that compose the protection and measuring section in a substation.The regulation system is based on a continuously variable autotransformer (Variac) that supplies to a power transformer that delivers the high current outputs and isolate the main supply from the load. A built-in ammeter and a timer gives the information about the current value and the operation time of the relay or breaker under test.