Product

8-Channel, 100 MHz Counter/Timer/Frequency Meter Function Card

ProDAQ 3808

-

Bustec Ltd.

ProDAQ 3808 - Bustec Ltd.

The ProDAQ 3808 function card, an enhanced version of the ProDAQ 3806 counter/timer function card, is designed to operate in one of three modes: pulse counter, frequency meter, or time interval counter. In the pulse counter and frequency measurement modes, users can process incoming signals of up to 25 MHz on each of the six channels. A time interval counter range is divided into six sub-ranges, covering times from 40 ns to 20000 s with a maximum resolution of 10 ns. For pulse-width measurements, the same ranges apply.

Product

Rack Module with Standard Contactors with Anti-Harmonic Filters

MODF Rack

-

Lifasa - International Capacitors, SA

MODF Rack - Lifasa - International Capacitors, SA

The MODF-RACK control units include, in a compact form, all the components necessary for the operation of a step of a capacitor bank with filters. MODF-RACK modules are divided into two basic blocks: power block and control block. The two blocks are mounted in a small frame to be installed in an electrical panel.

Product

Radio Frequency Probes (Consumer) HF66SWH016G480MSMPmS

1024465

-

FEINMETALL GmbH

1024465 - FEINMETALL GmbH

The Radio Frequency Probes HF66SWH016G480MSMPmS is an advanced coaxial probe designed for high-frequency applications. With a pitch of 5.00 mm and capable of operating within a temperature range of -45°C to +100°C, this probe ensures reliable performance in demanding environments. Its superior electrical specifications, including a continuous current rating of 0.50A and an impedance of 50 ohms at a frequency of up to 6 GHz, make it ideal for precise and efficient signal transmission.

Product

High Frequency LCR Meters up to 30MHz

11050

-

Chroma Systems Solutions, Inc.

11050 - Chroma Systems Solutions, Inc.

The Chroma 11050 Series HF LCR Meter is a precision test instrument designed to accurately measure and evaluate passive components at high speeds. Its measurement capabilities cover the primary and secondary parameters required for testing the inductance, capacitance, resistance, quality factor and loss factor of passive components. The HF LCR Meter has a broad testing frequency range 75kHz~30MHz/1kHz~10 MHz/60Hz~5MHz suitable for analyzing component characteristics under different frequencies. Its 0.1% basic measurement accuracy provides stable and highly reliable results. A fast 7ms measurement speed effectively increases productivity when working in an automated environment.

Product

Standard CT

2000A

-

Eltel Industries

2000A - Eltel Industries

• High accuracy of 2000/5A (0.05%) • multiple ratios • Various Current ratings

Product

Portable Single-Phase Energy Standard

PEWM-3C-1

-

EMSYST Ltd

PEWM-3C-1 - EMSYST Ltd

The single-phase energy standard PEWM-3C-1-1 is used for a quick check on site of all types single-phase electricity meters – for active, reactive or apparent energy, electromechanical and electronic. The voltage and the current are measured at the same time. The current can be measured directly within 10A or 100A range or with current clamp to 100A. The current clamp is electronically compensated.

Product

Radio Frequency Probes HF77HFMm0112G540MSMPmP

1034900

-

FEINMETALL GmbH

1034900 - FEINMETALL GmbH

The Radio Frequency Probes HF77HFMm0112G540MSMPmP is designed for high-performance applications where precision and reliability are critical. This coaxial probe provides a robust and efficient means of measuring radio frequency signals, with a frequency response up to 12 GHz. Its construction features high-quality materials, including a beryllium copper plunger and brass barrel plated with gold to ensure excellent conductivity and durability under various environmental conditions. With its wide temperature range of -45°C to +100°C, this probe adapts easily to different operational settings, making it an essential tool for testing and development in labs and field environments.

Product

Millimeter Wave Frequency Counter 70-170 GHz

-

Insight Product Company

Insight Product Company

Insight Product Co. offers the electronic frequency counter for frequency measurements of millimeter wave generators of continuous or pulsed signals. The counter has an auto and waiting modes of operation and a direct 6-digits reading in frequency range (70-170) GHz without an external mixer.

Product

Low-Mid Frequency Analyzer

LMFA-21

-

AmFax Ltd

LMFA-21 - AmFax Ltd

Amfax introduce the latest PXI based High Performance Low and Mid Frequency Analysis System operating from 100Hz TO 2MHz with an extremely low noise floor. This high accuracy measurement instrument utilizes the National Instruments Function Generator and Flex Digitizer to optimize your frequency related product performance. Using the industry standard PXI platform enables us to offer the system a fraction of the cost of other typical two box solutions.

Product

Ultra-Low Frequency Raman Spectrometer Down to 10 cm-1

Modular TeraHertz Raman Spectrometer

-

HORIBA, Ltd.

Modular TeraHertz Raman Spectrometer - HORIBA, Ltd.

HORIBA’s modular terahertz modular Raman spectrometer extends the spectral range of a measurement to < 10 cm-1. Consisting of an Ondax SureBlock™ module fiber coupled to HORIBA’s iHR320 imaging spectrometer, this custom system provides an affordable option for macro-Raman measurements close to the laser line. Below are Stokes and anti-Stokes spectra of elemental sulfur recorded with this system.

Product

1202a High Frequency Distribution

-

Precise Time and Frequency, Inc.

Precise Time and Frequency, Inc.

The ptf 1202A High Frequency Distribution amplifier provides high performance frequency references for laboratory or system use requiring distribution at frequencies of 30MHz and above.The ptf 1202A is especially designed to distribute the high frequency input signal to 12 separate outputs, with minimum signal distortion and maximum isolation between individual output signals.

Product

Standard Digital Multimeter - Auto Ranging

MM39

-

Martindale Electric Co. Ltd

MM39 - Martindale Electric Co. Ltd

The MM39 is an auto-ranging multimeter with a large rotary switch for easy selection of the required test, even when wearing gloves. There are two test buttons, one to lock the range and the other to hold the results which are displayed on a 3½ digit LCD screen.

The main test functions are AC voltage and DC voltage and current and resistance. The MM39 measures both AC and DC voltage between 0.1mV to 600V and AC and DC current between 10mA to 10A. There is a diode test and an audible continuity test which sounds at less than 25Ω.

Product

Global Standard Model For 4 Point Probe Sheet Resistance Automatic Measurement System

RT-3000/RG-1000F

-

NAPSON Corp.

RT-3000/RG-1000F - NAPSON Corp.

*Fully automatic system for large sizes of flat panel with glass loading robot*Tester self-test function, Measurement position correction function, wide measurement range*Min. 0.1 mm meas. resolution and user programmable test pattern*Host (CIM) communication and 2-D/3-D Mapping software

Product

Automatic Battery with Filters with Standard Contactors

BATLVF120

-

Lifasa - International Capacitors, SA

BATLVF120 - Lifasa - International Capacitors, SA

Accessories: Differential protection

Product

Capacitance Standard

SCA Series

-

IET Labs

SCA Series - IET Labs

The SCA Standard Capacitor series are highly stable cost-effective capacitance standards with low temperature coefficient, low losses and a wide range of values of 1 pF - 10,000 F. The cost and flexibility make this our most popular capacitance standard.

Product

MOSFETs For High Frequency Amplifier

-

Renesas Electronics Corp.

Renesas Electronics Corp.

The MOSFETs shown below are best suited for amplification of high-frequency signals.

Product

Standard Pattern Generator Board

BL-PG315-01

-

MicroImage Video Systems

BL-PG315-01 - MicroImage Video Systems

The MicroImage PG315 pattern generator is designed for simple size and geometry reference applications. The PG315 will overlay one of five standard patterns including a centered cross line, a centered cross hair, a centered target style symbol, a dot grid (cross dot) array, a hatch grid (crosshatch) array.