Product

Ferrite Low Frequency Transducers

-

RCF

RCF

Ceramic magnetic design able to provide high-power handling and low distortion for the most demanding speaker manufacturers.

Product

Single Frequency CW 532 NM Laser up to 18W

EQUINOX

-

M Squared Lasers

EQUINOX - M Squared Lasers

Equinox is a single frequency, 532 nm continuous wave laser designed for a range of scientific applications including pumping any Ti:Sapphire laser systems. It is engineered to meet the needs of experimentalists requiring high-performance systems with an emphasis on reliability, stability and ease of use. The laser incorporates pump diodes within the central unit and is fully automated with hands-free operation and control via ethernet, webpage and TCP/IP remote interface. This completely sealed system is inherently stable with low noise levels <0.05 % RMS and ultra-stable output powers with ±0.5 % stability. Equinox has options of high output power up to 18 W. Other major applications include mixing source, pump source for dye lasers and frequency doublers, optical tweezers, and biomedical imaging.

Product

Resonant Frequency Testing

E-Meter MK II™

-

James Instruments Inc.

E-Meter MK II™ - James Instruments Inc.

Determines resonant frequencies of the three modes of vibration. Material characteristics such as Youngs Modulus of Elasticity, Modulus of Rigidity, Poissons Ratio and Damping Constant can be calculated. Frequencies are automatically scanned in one of four ranges. The system can determine flexural resonance of concrete under accelerated freezing and thawing cycles and aggressive environments.

Product

Standard Test Devices

-

Zhengzhou SMS Electric Co.,Ltd

Zhengzhou SMS Electric Co.,Ltd

Fast, accurate verification to ensure that all devices work reliably.

Product

Radio Frequency Probes (Industrial) HF860PCBCC014G530MCXfS

1038337

-

FEINMETALL GmbH

1038337 - FEINMETALL GmbH

The Radio Frequency Probes (Industrial) HF860PCBCC014G530MCXfS are engineered specifically for high-performance applications in the telecommunications and electronics sectors. This model features a robust coaxial probe design tailored for precise measurements and reliability in a wide temperature range of -45°C to +100°C. With a pitch of 6.00 mm (or 236 mil), this probe is optimal for tightly packed electronic assemblies where precision is paramount.

Product

Frequency Counter

FC-2500A

-

MRC ltd.

FC-2500A - MRC ltd.

High sensitivity for the VHF & UHFfrequency measurement, useful for theCB amateur.* Handheld & pocket size instrument.* Wide measuring range up to 2.6 GHz.* Good resolution, 0.1 Hz min. displayunit for 10 MHz range.* Used the exclusive Microprocessor ICoffered the intelligent function:Frequency, Period, Multi resolution,Data hold, Relative measurement, Datarecord( Max., Min., Average reading).* Auto power off & manual power off.* LCD display for low powerconsumption & clear read-out even inbright ambient light condition.

Product

Frequency Divider

Trig-TekTM 313A

-

Astronics Corporation

Trig-TekTM 313A - Astronics Corporation

Divide high frequency to a lower frequency with an exact integer division with 1-digit divisor increments from 1 to 9999

Product

Radio Frequency Probes (Consumer) HF860PCBGS016G830MCXfS

1118503

-

FEINMETALL GmbH

1118503 - FEINMETALL GmbH

The Radio Frequency Probes HF860PCBGS016G830MCXfS are designed for optimal performance in testing and measurement applications. This high-frequency coaxial probe features an impressive operational temperature range from -45°C to +100°C, making it suitable for a variety of environments. With a continuous current rating of 5A and capability to handle frequencies up to 6GHz, this probe ensures reliable performance during critical readings. The meticulously engineered structure includes a robust mechanical design, characterized by a preload of 450cN and a spring force of 750cN, thereby enhancing durability and precision in measurements.

Product

IEC60335 Standard Electrical Temperature Tester

CX-w15

-

Shenzhen Chuangxin Instruments Co., Ltd.

CX-w15 - Shenzhen Chuangxin Instruments Co., Ltd.

Standard Test corner/room conform to IEC60335-1:2004. and GB4706.1-2005. can be used to the temperaturetest of all kinds of electronic products supply, in conformity with the standards requirement of the environmental conditions.

Product

Radio Frequency Probes HF77HFMf0112G540MSMPmP

1051683

-

FEINMETALL GmbH

1051683 - FEINMETALL GmbH

The Radio Frequency Probes HF77HFMf0112G540MSMPmP is a precision coaxial probe engineered for high-frequency applications, operating up to 12 GHz with a nominal impedance of 50 ohms. This probe is designed to withstand extreme temperatures ranging from -45°C to +100°C, making it ideal for diverse operating environments. The robust construction uses high-grade materials, such as a beryllium copper plunger and brass barrel with gold plating, ensuring both durability and optimal performance in critical testing situations.

Product

Standard - 5.00 (142.00) - 8.30 (235.00) Feed Through Probe

P3325-0

-

ECT

P3325-0 - ECT

Current Rating (Amps): 10Average DC Resistance lower than (mOhm): 10Test Center (mil): 125Test Center (mm): 3.18Full Travel (mil): 100Full Travel (mm): 2.54Recommended Travel (mil): 66Recommended Travel (mm): 1.68Overall Length (mil): 645Overall Length (mm): 16.38

Product

High Frequency Compensated Ground Lead

PK007-030

-

Teledyne LeCroy

PK007-030 - Teledyne LeCroy

High Frequency Compensated Ground Lead.

Product

Standard Voltage 50 Pin D-Type Connector Blocks and Breakouts for Pickering

-

Pickering Interfaces Inc.

Pickering Interfaces Inc.

The connector blocks and breakouts below are suitable to use with Pickering cards and modules that utilize a standard voltage 50-pin D-type connector.

Product

DOUBLE FREQUENCY DOUBLE VOLTAGE TEST SET

-

International Biological Laboratories

International Biological Laboratories

This test set provides a continuously variable output voltage at double frequency to test the insulation between turns of coils, layer to layer, terminals of windings with either uniform or graded insulation and also between the windings and earth, with graded insulation of both Distribution and Power transformers.

Product

High Frequency Probe HF77KETMINIFAKRAm0412G1080MSMPmF

1109577

-

FEINMETALL GmbH

1109577 - FEINMETALL GmbH

The High Frequency Probe HF77KETMINIFAKRAm0412G1080MSMPmF (item number 1109577) is designed for reliable transmission of high-frequency signals in test and measurement applications. With a defined impedance of 50 Ω, HF77KETMINIFAKRAm0412G1080MSMPmF supports controlled signal routing and helps minimize reflections and signal loss at the test interface. The frequency range of HF77KETMINIFAKRAm0412G1080MSMPmF extends up to 12 GHz, and this version is intended for contacting KET MINI FAKRA connectors. On HF77KETMINIFAKRAm0412G1080MSMPmF, spring forces of 420 cN on the outer contact and 120 cN on the inner contact provide defined mechanical contacting.

Product

Temperature Stabilized Resistance Standards

-

Measurements International Ltd.

Measurements International Ltd.

The temperature stabilized resistance standards offer customers the very best in accuracy, and stability. With 3 different models to choose from, covering the full range of resistance values.

Product

Digital frequency counters

-

PROMAX Electronica

PROMAX Electronica

The instrument is equipped, in addition to the 20 Hz-160 MHz input, a second input for measurement up to 2.4 GHz with an impedance of 50 Ohms.

Product

Radio Frequency Probes (Industrial) HF860GT16m014G530MCXfP

1032960

-

FEINMETALL GmbH

1032960 - FEINMETALL GmbH

The Radio Frequency Probes (Industrial) HF860GT16m014G530MCXfP, order code 1032960, is a high-performance coaxial probe designed to meet rigorous industrial requirements. With a durable construction utilizing materials like beryllium copper for the plunger and brass for the barrel, this probe ensures optimal signal integrity and longevity. Its advanced specifications include a continuous current capacity of 10A, an impedance rating of 50 ohms, and a frequency range of up to 4GHz. This versatility makes it ideal for various RF applications in demanding environments.

Product

High Frequency Infrared Carbon and Sulfur Analyzer

CS-8820

-

Wuxi Jinyibo Instrument Technology Co., Ltd.

CS-8820 - Wuxi Jinyibo Instrument Technology Co., Ltd.

Infrared detector with low noise, high sensitivity and high stability. The modular design of the whole machine improves the reliability of the instrument. The electronic balance is automatically connected. WINDOWS full Chinese operation interface, easy to operate, easy to master. Dynamic display of various data and carbon in the analysis process. Measuring linear range is wide, and can be expanded. High-frequency circuit design is reasonable, high-frequency furnace power is adjustable, suitable for different material sample analysis requirements. The automatic cleaning device of the burner can reduce the influence of dust on the analysis results. The burner heating device makes the conversion rate of sulfur tend to be consistent, which improves the stability of sulfur determination. Measuring linear range is wide, and can be expanded. The software is fully functional, providing more than forty functions such as file help, system monitoring, channel selection, mathematical statistics, result correction, breakpoint correction, and system diagnosis.