Product

Barcode Conformance Calibration Standards

-

Applied Image, Inc.

Applied Image, Inc.

Barcode symbol quality has been at the forefront of discussion among practitioners in the automatic identification and data capture (AIDC) industry since they were invented in 1951. Barcodes became commercially successful when they were used to automate checkout systems at grocery stores, with the very first scanning of the Universal Product Code (UPC) on a pack of Wrigley Company chewing gum in June 1974. The Uniform Code Council (UCC) published barcode quality guidelines, and ANSI X3.182-1990 became the first published standard for barcode quality. Since then, ISO/IEC 15416 for 1D symbols and ISO/IEC 15415 for 2D symbols have become the global standards for grading printed barcodes.

Product

SINE Sinusoidal Single Frequency Gratings

-

Applied Image, Inc.

Applied Image, Inc.

Our SINE Sinusoidal Single Frequency transmittance patterns have proved to be very useful for specialized MTF Measurement as well as for such applications as moirè contouring. They are made on film base material with a nominal thickness of 0.175mm. This material is polyester and tends to be somewhat birefringent. The harmonic modulation values are generally 3% or less.

Product

AC Calibration Standard

1U647-001

-

Sigma Tek, Inc.

1U647-001 - Sigma Tek, Inc.

The 1U647-001 is a low cost calibration standard used to determine if a 1U632-100 or a 1U663-100 DMU requires factory calibration. Its portability makes it ideal for field-testing. The standard generates signals that simulate the aircraft’s resolvers, rotary variable transformers (RVTs), and linear variable displacement transformers (LVDTs). The unit also generates a pulse width modulated (PWM) signal, and routes the output of an ARINC 429 source to the different DMU input channels. The calibration standard connects directly to the DMU and replaces the output signals of an active extender card. Discrete switch settings simplify testing. The unit is housed in a rugged aluminum case.

Product

Frequency Multipliers

-

Pacific Millimeter Products

Pacific Millimeter Products

A series of broadband frequency multipliers is available with output frequencies between 18 and 110 GHz. The use of GaAs diodes on a suspended substrate circuit allows an extremely compact device. Circuit symmetry is used to enhance either even or odd harmonics while suppressing unwanted odd or even harmonics. These devices can be used as higher order even or odd harmonic multipliers with reduced efficiency. All of these multipliers have maximum input power +23 dBm for temperature less than +50°C.

Product

Frequency to Current Converter

DAT4540R

-

Datexel

DAT4540R - Datexel

The Frequency to Current converter DAT4540R is a signal conditioning din rail mount converter which converts a pulse input to an analog output equal to the set range which is selectable from 0.1 Hz up to 20 KHz. The DAT4540R also provides 2 relay outputs and a transistor output. The input can be from a Tacho, TTL, PNP transistor or from any Namur standard. The DAT4540R provides a Voltage or Current output that is isolated from the power supply and input.

Product

Radio Frequency Probes (Industrial) HF860MMBXf014G530MCXfP

1032966

-

FEINMETALL GmbH

1032966 - FEINMETALL GmbH

The Radio Frequency Probes (Industrial) HF860MMBXf014G530MCXfP is designed for precision and reliability in various industrial applications. This coaxial probe excels with its robust design, featuring a pitch of 7.00 mm and a wide temperature range from -45°C to +100°C, making it suitable for environments that demand durability and versatility. The specifications highlight its ability to carry a continuous current of up to 10 A and handle frequencies up to 4 GHz, which is essential for high-frequency applications.

Product

VDI Millimeter-Wave Frequency Extension Modules for PXA, MXA, EXA Signal Analyzers

-

Keysight Technologies

Keysight Technologies

These modules offer low conversion loss and excellent noise figure. Standard features include dual operating modes. First, the module can function as a high performance down-converting mixer. The second operating mode functions as a block down-converter with a broadband IF up to 20 GHz. Power to the module is provided via an included external DC power supply. These frequency extenders minimize conversion loss by multiplying and amplifying the LO signal internally, thus taking advantage of the benefits of low harmonic mixing. This architecture also preserves the X-Series precision frequency resolution and low phase noise, extending those qualities into the millimeter and sub-millimeter bands.

Product

Low Frequency 2-Way Power Dividers To 3000 MHz

-

Pulsar Microwave Corporation

Pulsar Microwave Corporation

Power dividers from 4 kHz to 3 GHz are available from Pulsar Microwave in connectorized packages with SMA-female connectors, standard. This series is designed to handle 1 watt input power. They are designed for use in 50-ohm systems, and cover frequencies for VHF, UHF, Cell and PCS applications.

Product

Robotics and Machine Vision Standards

-

Applied Image, Inc.

Applied Image, Inc.

Accuracy in machine vision systems is critical to achieving strategic goals regarding quality, efficiency, and consistency. Use our ACCUplace product lines to calibrate vision systems’ distortion, placement/alignment, or other field parameters in systems used for guidance, identification, gauging, and inspection. Using our specialized ACCUedge® technology, our Robotic and Machine Vision Standards are manufactured with line-edge quality that is second to none in the industry, providing the precision needed to calibrate almost any system. Should you need to alter feature patterns, size, or substrate to fit your needs, fill out our Optical Components and Standards form to start the conversation.

Product

Standard & High Speed Amplifiers

-

Advanced Energy

Advanced Energy

Advanced Energy's Trek high voltage power amplifiers employ unique and proprietary circuitry. Benefit from closed-loop amplifier systems that feature exceptional DC stability and excellent wideband performance characteristics. And thanks to all-solid-state designs, our amplifiers are protected from output short circuits and overvoltages.

Product

Frequency Dividers

-

Pasternack Enterprises, Inc.

Pasternack Enterprises, Inc.

SMA SPDT electro mechanical RF relay switch features Indicators, Failsafe, Normally Open with an isolation minimum of 60 dB. SPDT electromechanical relay radio frequency switch PE71S6052 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our SPDT SMA coaxial RF relay electromechanical switch can ship worldwide the same day that it is bought as with our other available RF parts.

Product

Standard Accessory Replacement Kit for PP017/PP018

PKIT4-5MM-101

-

Teledyne LeCroy

PKIT4-5MM-101 - Teledyne LeCroy

Standard Accessory Replacement Kit for PP017/PP018.

Product

Radio Frequency Probes (Industrial) HF860MMBXf014G530MCXfS

1039120

-

FEINMETALL GmbH

1039120 - FEINMETALL GmbH

The Radio Frequency Probes (Industrial) HF860MMBXf014G530MCXfS is a high-performance coaxial probe designed for a variety of industrial applications, ensuring reliable and precise measurements. Built for durability, this probe operates efficiently across a wide temperature range of -45°C to +100°C. With a contour that allows for a pitch of 7.00 mm (276 mil), it supports various setups and configurations to meet diverse technical requirements. The advanced design includes a robust spring mechanism that ensures consistent contact, vital for high-frequency applications up to 4 GHz.

Product

Erbium Fiber Frequency Comb

-

AOSense

AOSense

Detailed description of item: The AOSense frequency comb is a low noise, polarization maintaining (PM) device. Key features include a PM fiber architecture centered at 1550nm with turnkey modelocking; a free-running linewidth of the carrier-envelope offset frequency of <200 kHz; a temperature-insensitive all-fiber f-2f interferometer exhibiting fceo beatnotes with SNR > 45dB (300kHz RBW); and dual fast/slow cavity length actuators with a bandwidth of >300 kHz. The repetition rate of the comb is factory set and allows matching across multiple combs for dual comb applications. The optics package incorporates an optical heterodyne module designed for locking to the comb to an ITU-specified laser reference. The comb is capable of supporting an Allan deviation of < 5 x 10-18 at 1 second and ~10-20 after 105 seconds. Add-on features include all fiber extensions to visible wavelengths corresponding to several atomic transitions. An integrated comb electronics package is currently under development.

Product

Non Standard Connectors

-

C.C.P. Contact Probes Co., LTD.

C.C.P. Contact Probes Co., LTD.

With over 10,000 Designs, you could customize the product to achieve your spec!

Product

Standard Resistors for Temperature Measurement

-

Measurements International Ltd.

Measurements International Ltd.

High Stability, Split Guard Circuit, Internal Temperature Sensor, Custom Values Available, Includes Calibration Data.

Product

Dual Frequency 900 kHz & 2250 kHz 2D Imaging Sonar

BlueView M900-2250-130-Mk2

-

Teledyne Marine BlueView

BlueView M900-2250-130-Mk2 - Teledyne Marine BlueView

Your product description goes here.​The dual-frequency 900 kHz and 2250 kHz provide the most versatility of any 2D imaging sonar. The 900 kHz offers high-resolution long range navigation, object detection, and obstacle avoidance, while the 2250 kHz provides ultra-high resolution at close range. ROV navigation, hull inspections, structure inspections, diver monitoring, and search and recovery are a few applications that benefit from the dual-frequency’s imaging capabilities.

Product

Radio Frequency Probe HF66LSC016G540MSMPmF

1024460

-

FEINMETALL GmbH

1024460 - FEINMETALL GmbH

The HF66LSC016G540MSMPmF Radio Frequency Probe offers advanced capabilities tailored for precision applications in radio frequency testing and measurement. This high-performance device operates efficiently within a wide temperature range of -45°C to +100°C, ensuring reliability in various environmental conditions. With a robust coaxial design, the probe features an impedance of 50 ohms and supports frequencies up to 6 GHz, making it ideal for high-frequency applications where accuracy is paramount.