Loop backs
connect input to ouput to test I/O loop.
-
Product
PXI/PXIe Analog Output/Current Loop Simulator Module - 16 Channel
43-765-001
Analog Output Module
The 41/43-765-001 is a PXI/PXIe 16-channel Analog Output Module designed to meet the requirements of industrial control applications utilising current loops 4 – 20mA. It consists of up to four 16-bit, digital-to-analogue converters (DAC), capable of creating four current outputs each. Output current within 0mA - 4mA and 20mA - 24mA, give the ability to simulate error or extra signalling conditions. The ±24mA mode gives the ability to simulate either sourcing or sinking sensor.
-
Product
Push Back Probes (VF4) VF483B0010G03
1016564
-
The Push Back Probes (VF4) VF483B0010G03 are engineered for precision and reliability in various applications, showcasing their versatility and technical sophistication. With a pitch of 4.00 mm (157 mil), these probes are designed to perform effectively within a temperature range of -45°C to +100°C. The S1 additional designation ensures compatibility across different systems, making them an ideal choice for specialized operations where accuracy is paramount. This model is characterized by a mechanical preload of 80 cN and an impressive spring force of 300 cN, supporting a nominal travel distance of 5.00 mm with a maximum allowable travel of 5.50 mm, facilitating precise engagement with contact points.
-
Product
Classic Collet | Back | Without Line | Matt Or Glossy | Ø 10 Mm
020-2x20/5
-
Secure plastic mounting cap for collet or wing knob
-
Product
LOCAL LOOP SIMULATOR FOR TR-114INCLUDING BRIDGED TAP
458-LM-A1-30-TR114
-
The Model 458-LM-A1-30-TR114 Local Loop Simulator for TR-114 is the ideal solution for simulating test loops as defined in TR-114 and includes a Bridged Tap. In addition, it is also suitable for ADSL, ADSL2, ADSL2+, and VDSL2 chip/modem/DSLAM testing of straight loops out to 24,000
-
Product
Saicheng Adhesive Loop Tack Tester
-
VOC-01 Loop Tack Tester is applicable to measure the tack property of adhesive tapes, pressure-sensitive adhesives (PSA), and adhesive materials according to ASTM D6195.
-
Product
Push Back Probes (VF100) VF10017B180G15
1002252
-
The Push Back Probes (VF100), specifically the VF10017B180G15 model, are designed as essential tools in various electronic applications. Known for their basic contact probe design, these probes are capable of operating under extreme temperatures ranging from -45°C to +100°C. Their high durability is underscored by the beryllium copper tip and robust brass barrel, both plated with gold to enhance conductivity and performance.
-
Product
Temperature Loop Control Setup
ULP-27
-
Unitech Scales And Measurements Pvt. Ltd
Unitech’s Temperature Control Loop Setup is basically a PC based PID controller setup used for closed loop and open loop analysis of temperature process system. The setup comprises of RTD temperature Sensor. The water flows through the Rotameter and Process tank to which a heating coil is fitted. The heater is controlled by a Thirstier drive. The Thirstier drive is connected to PID controller. The manual control valve can control the water flow. The system is mounted on a tabletop model with all necessary Piping. Water at approx. 100 LPH has to be supplied to a system externally. The electronic panel comprises of ADC/DAC card with RS-232 interfaces.
-
Product
Push Back Probes (VF3) VF305B300G15
1005905
-
The Push Back Probes (VF3) VF305B300G15, with order code 1005905, represent a hallmark of precision and reliability in contact probing technology. Designed for varied applications, these basic contact probes are engineered to endure extreme temperature ranges from -45°C to +100°C, ensuring consistent performance in challenging environments. With a pitch measurement of 3.00 mm (118 mil), they deliver reliable connectivity and efficient signal transfer across diverse use cases. The robust construction employs high-grade materials such as beryllium copper for the plunger, plated in gold for enhanced conductivity, while the brass barrel, also gold-plated, ensures durability and anti-corrosion.
-
Product
Back Pressure Tester
MDBPT2
-
Quickly test for back pressure and identify clogged or obstructed catalytic converters. Three stage adapter (18mm-12mm) for accessing O2 sensor ports or (standard 1/4-20) self tap access anywhere. Adapter flange for common Toyota style O2 sensors.
-
Product
PXI Analog Output/Current Loop Simulator Module - 4 Channel
41-765-004
Analog Output Module
The 41/43-765-004 is an 4-channel Analog Output Module designed to meet the requirements of industrial control applications utilizing current loops 4 – 20mA. It consists of up to four 16-bit, digital-to-analogue converters (DAC), capable of creating four current outputs each. Output current within 0mA - 4mA and 20mA - 24mA, give the ability to simulate error or extra signaling conditions. The ±24mA mode gives the ability to simulate either sourcing or sinking sensor.
-
Product
Push Back Probes (VF4) VF416B140G15
1005225
-
The Push Back Probes (VF4) VF416B140G15 is the ideal solution for a wide range of applications, providing exceptional performance and reliability. With a basic contact probe design, it's tailored to meet the challenging demands of today's technical environments. This probe features a pitch of 4 mm (157 mil), capable of operating within a broad temperature range of -45°C to +100°C. Its engineering ensures not only efficiency but also precision, making it suitable for various tasks that require consistent electrical connections and precise mechanical functioning.
-
Product
Push Back Probes (VF4) HVF4RD
1043744
-
The HVF4RD Push Back Probes are an essential component for various applications that require reliable electrical connections under challenging conditions. With a continuous current capacity of 8.00 A, these probes are designed to deliver optimal performance in demanding environments, ensuring safety and efficiency. The internal thread specification of 2.5X0.35 allows for secure installations and compatibility with a range of equipment, making these probes an ideal choice for professionals seeking quality and reliability in their tools.
-
Product
Push Back Probes (VF100) VF10082B0003G10
1005141
-
The Push Back Probes (VF100) VF10082B0003G10 is designed for precision testing in various engineering applications. This basic contact probe offers excellent reliability and durability, making it suitable for diverse environments with temperature ranges from -45°C to +100°C. The design features a pitch of 2.54 mm, and with a remarkable preload of 80 cN, it ensures secure contact during use. The probe's construction is geared toward optimal performance, with a total length of 69.50 mm and a projection height of 40.50 mm, making it compact yet effective for a wide range of probing tasks.
-
Product
Push Back Probes (VF4) VF416B100G15
1009923
-
The Push Back Probes (VF4) VF416B100G15, with order code 1009923, are a critical component designed for precision in various applications. Engineered as basic contact probes, these VF4 models exhibit a pitch of 4.00 mm, enabling effective connectivity while operating within a temperature range of -45°C to +100°C. The probes are built to withstand demanding environments, providing reliability and durability essential for high-performance tasks.
-
Product
THREE WAY BACK PRESSURE KIT
TU24APB
-
*Allows quicker and more accurate testing of exhaust blockages in catalytic converters, mufflers, etc*2-1/2" gauge features two multi-colored bands - idle and 2,500 RPM - with pressures shown in PSI and bar*Includes 6' of hose, enough length to test from driver's seat
-
Product
Line Loop Tester
8455
-
Simpson?s Model 8455 Line Loop tester detects line shorts, opens and multiple ringers, DC voltages and loop resistance. It can measure DC voltage up to 100 volts and loop resistance to 2 megohms. A front panel ?reverse polarity? switch allows changing polarity positions quicker and easier than manually switching test leads when making line checks.
-
Product
Short Circuit Loop Impedance Meter
AMZC-304
-
Short circuit loop impedance measurement in networks with nominal voltage: 220/380V, 230/400V, 240/415V, with frequency 45…65Hz ; Short circuit loop impedance measurement with 15mA current, without triggering RCD. ; Detection of the replacement L and N in the socket and automatic swap in the meter
-
Product
Loop Powered Trip Amplifier With Dual Relay Output
SEM1636
-
The SEM1636 monitors a (4 to 20) mA loop and provides two independent change over trip contacts set to trip at any point within the (4 to 20) mA range.
-
Product
Loop Testing
-
Megger loop testers offer both traditional measuring techniques and state of the art “non-RCD Tripping” technology. Use these products to determine the prospective earth fault current, which is the maximum current able to flow in a phase-earth fault in an installation, and also to indicate the prospective short circuit current which is the maximum current able to flow in the event of a phase-neutral fault.
-
Product
Push Back Probes (VF3) VF383B0006G15
1006146
-
The Push Back Probes (VF3) VF383B0006G15 are designed to meet a wide array of needs across various applications, delivering exceptional performance with precision and reliability. With a temperature range of -45°C to +100°C, these reliable contact probes ensure optimal operation in diverse environmental conditions. The basic contact probe design, coupled with an impressive continuous current rating of 8.00 A and a low typical contact resistance of 30.00 mOhm, makes them suitable for demanding tasks in both industrial and commercial settings.
-
Product
Push Back Probe (VF3) VF383B0004G15L
1011529
-
The Push Back Probe VF383B0004G15L (item number 1011529) is designed to verify that terminals are correctly locked in connector housings. VF383B0004G15L can verify that a terminal remains securely locked in the connector housing and is not pushed back beyond the permitted position during contacting. For VF383B0004G15L, spring force is 1500 cN at a nominal travel of 5 mm. Pointing accuracy for VF383B0004G15L is specified as ±0.1 mm. VF383B0004G15L is rated for 8 A continuous current with a typical contact resistance of 30 mΩ. For installation, VF383B0004G15L uses an M2 x 0.2 thread.
-
Product
Push Back Probe (VF4) VF483B0001G15
1005203
-
The Push Back Probes (VF4) VF483B0001G15 are designed for high performance in various applications, extending their utility across multiple industries. With a basic contact probe design, these probes offer a pitch of 4.00 mm (157 mil) and are built to endure a wide temperature range from -45°C to +100°C. They are engineered to deliver reliable results, showcasing a continuous current rating of up to 10.00 A and maintaining a typical contact resistance of just 30.00 mOhm, ensuring optimal conductivity and minimal energy loss.
-
Product
Push Back Probes (VF3) VF317B270G15
1010459
-
The Push Back Probes (VF3) model VF317B270G15, part number 1010459, is designed as a basic contact probe that excels in versatile applications requiring precise measurement and reliability in challenging environments. Engineered to operate effectively within a temperature range of -45°C to +100°C, these probes ensure durability across extreme conditions. Their design features a pitch of 3.00 mm, making them suitable for detailed electronic interfacing where accuracy is paramount. With a maximum travel of 5.50 mm and a pointing accuracy of ±0.10 mm, users can expect exceptional performance in tight spaces, elevating their prototype designs to the next level.
-
Product
Push Back Probes (VF4) VF422B0001G15
1022238
-
The Push Back Probes (VF4) model VF422B0001G15 is engineered for precision in challenging temperature environments, with a remarkable operating range from -45°C to +100°C. This basic contact probe features an optimized pitch of 4.00 mm, ensuring effective electrical connectivity in various applications. Its design is tailored for rigorous use, exemplified by a continuous current rating of 10A and a low typical contact resistance of just 30 mOhm, making it ideal for high-performance settings where reliability and performance are paramount.
-
Product
Push Back Probes (VF4) VF417B400G25
1007563
-
The Push Back Probes (VF4), specifically model VF417B400G25, represents a specialized connection solution designed to deliver reliability in high-performance environments. These probes feature a basic contact probe design with an impressive temperature range of -45°C to +100°C, making them suitable for diverse applications. Engineered with a pitch of 4.00 mm, they are optimized for precision and efficiency, ensuring robust conductivity with a continuous current rating of 10 A and a typical contact resistance of just 30 mOhm.
-
Product
Push Back Probes (VF4) HVF4RDSHAT
1039492
-
Introducing the Push Back Probes (VF4) HVF4RDSHAT, designed with precision and efficiency in mind. These probes are essential for various applications, offering a robust solder connection type that ensures reliability and performance under critical conditions. With a total length of 59 mm and an outer diameter of 3.50 mm, they are engineered to fit seamlessly into your existing systems, providing the utmost connectivity and efficiency in operations. Their unique internal thread size of 2.5x0.35 further enhances compatibility across different interfaces, making them a vital component in your toolkit.
-
Product
Loop Antenna
ZHX7-0.009-200-1486
-
Loop Antenna, Frequency 0.009~200MHz, Linear Polarization, N-Female
-
Product
Modular Breakout System for Hardware-In-Loop Simulation
-
Designed in partnership with OPAL-RT Technologies, this Modular Breakout System combines a BoB feature set with the added flexibility of an FIU. By mating the FIU chassis directly to the BoB using our plug-in modules, cabling is minimized, creating a more compact reliable design and improving signal integrity.
-
Product
Push Back Probes (VF4) VF417B300G25
1007631
-
The Push Back Probes (VF4) VF417B300G25 is designed for precision applications, featuring a basic contact probe that ensures reliability and efficiency. This model supports a wide operational temperature range of -45°C to +100°C, making it suitable for various environments. It boasts a pitch measurement of 4.00 mm (157 mil), allowing for effective contact in diverse electronic setups.In terms of electrical specifications, the probe can handle a continuous current of 10.00 A with a typical contact resistance of just 30.00 mOhm, ensuring optimal performance under load. Mechanically, it features a preload of 300.00 cN and a robust spring force of 2500.00 cN, providing stability and accuracy with a nominal travel distance of 5.00 mm. The design also maintains a pointing accuracy of +/- 0.10 mm, ensuring precision in every application.
-
Product
Wafer Back Side Cooling System
GR-300 Series
-
The GR-300 Series can control gases used to cool the back side of wafers that are fixed in position by an electrostatic chuck system.The stability and accuracy of the GR-300 makes it ideal for controlling the flow of Helium and Argon in wafer cooling systems.
