Loop backs
connect input to ouput to test I/O loop.
-
Product
4-20mA Current Loop D/A Converters
-
ADI integrated solutions combine both the D/A converter and driver in one chip to provide the required output directly from the digital domain. Analog Devices’ portfolio of leading industrial D/A converters and drivers provides a range of programmable output ranges from standard 4 mA to 20 mA for current loop communication to ±10 V for actuator control. ADI industrial converters offer considerable control functionality and advanced on-chip diagnostics to maximize system uptime, as well as eliminate the need for costly calibration routines needed by some traditional discrete architectures.
-
Product
Push Back Probes (VF4) VF416B230G15
1005241
-
The Push Back Probes (VF4) VF416B230G15, with order code 1005241, are engineered for precision and durability in a variety of applications. Designed with a basic contact probe structure, these probes exhibit impressive performance characteristics, including a wide temperature range from -45°C to +100°C, making them suitable for challenging operational environments. The probes are engineered to handle continuous current of 10 A while maintaining a typical contact resistance of only 30 mOhm, which enhances their reliability and efficiency in electrical applications.
-
Product
Push Back Probes (VF3) VF383B0009G15L
1010631
-
The Push Back Probes (VF3) VF383B0009G15L is a premier solution for precision applications requiring reliable contact and accurate measurements. Designed with a basic contact probe configuration, this model features a pitch of 3.00 mm (118 mil) and operates efficiently across a temperature range from -45°C to +100°C. With a robust design that boasts a total length of 75.70 mm and a projection height of 40.80 mm, this probe ensures that high-performance standards are met across various demanding environments.
-
Product
Open Loop Current Sensor
C03 30A
-
The C03 offers efficient and precise sensor solutions for direct, alternating and pulsed currents in industrial, commercial and communication systems. It consists of three main components: an accurate, linear Hall sensor with low temperature drift, a flux collector and a transformer. It is characterized by a very low resistance and thus lowers power loss and temperature drift - for optimal performance.
-
Product
Array Solutions K9AY Loop Wire/Mast Kit
AS-AYL-4 WM
-
All materials required for the installation of your receiving loop system, have been included in this kit with the exception of those items listed below under the heading; ‘You will also need. ‘ The specified 8’ x 5/8” copper-clad steel ground rod can be purchased at just about any local hardware store or home center.
-
Product
Active Loop Antennas / Magnetic Field Probes
-
Is an active, shielded handheld loop antenna with nearly con- stant antenna factor over the entire frequency range. It can be used for testing according to CISPR, MIL, FCC, EN, ISO, ANSI, ETSI and many other standards.
-
Product
Push Back Probes (VF4) VF483B0004G15
1005190
-
The Push Back Probes (VF4) VF483B0004G15, with order code 1005190, is an exemplary device tailored for diverse applications, utilizing basic contact probe technology to enhance precision and functionality in electronic testing and measurement. This model boasts a robust design, featuring a plunger made from high-quality beryllium copper and gold plating to ensure excellent electrical conductivity and durability. Rated for a continuous current of 10.00 A and suitable for temperatures ranging from -45°C to +100°C, this probe is ideal for various demanding environments.
-
Product
Panel-mounted Power Amplifier(Hardware In The Loop Testing)
PA60Bi
-
PA60Bi is the panel-mounted power amplifier, which can produce 3-phase current, with maximum RMS phase current of 60A and maximum output power of 800VA, and 4-phase voltage, with maximum RMS phase voltage of 120V and maximum output power of 60VA.
-
Product
Opto-Isolated Current Loop Signal
4029
-
SPECTEC Innovative Sensor Solutions
SPECTEC's Model 4029 digital opto-isolated current loop signal conditioner prevents ground loops and interrupts any galvanic signals riding on magnetic speed sensor's output signal.. This signal conditioner converts magnetic, variable reluctance and inductive sensors' sinusoidal signals into a 4-20 mA output suitable for interfacing with process control units, dataloggers, flow controllers, and computers.
-
Product
Back Plane Tester
-
This machine is used to test back planes used in telecommunications central stations. An operator loads a completed point to point wired back plane onto a retractable shelf on the front of the tester. Table continues and the disk falls through a hole into the bin. The shelf is pushed back into the machine where it is held in place by pneumatic operated clamps. Then a series of pneumatic cylinders sequentially insert a test card into each location in the back plane. A remote instrument performs a complete point to point continuity, short and hi pot test on all connections in the back plane.
-
Product
Three Loop Antenna
VVLA-30M
-
The three loop antenna VVLA-30M is a standard measurement antenna according to CISPR15-2005/GB17743-2007 standard
, it can work with LISUN EMI-9KA / EMI- 9KB EMI Receiver System for EUT magnetic field radiation measurement between X, Y and Z planes. The antenna measurement is accurate, switch conveniently and it can completely replace imported products. -
Product
Push Back Probes V0406B300G15
1014167
-
The V0406B300G15 Push Back Probes are a cutting-edge solution designed for precision measurement and contact applications. Operating within a temperature range of -45°C to +100°C, these probes are constructed to deliver reliable performance across various environments. With a pitch of 4.00 mm (157 mil), they provide an excellent balance between size and functionality, making them suitable for tight spaces while ensuring accurate readings and connections.In addition to their basic contact functionality, these probes have impressive electrical specifications, capable of handling a continuous current of up to 8.00 A with a typical contact resistance of only 30.00 mOhm. The mechanical design boasts a preload of 400 cN, spring force of 1500 cN, and a nominal travel of 9.50 mm, allowing for greater versatility in applications. The materials used in the construction, such as beryllium copper for the plunger and gold plating, ensure durability and longevity, making the V0406B300G15 an essential tool for specialists in the field.
-
Product
Push Back Probes (V04) V0417B180G15E33
1022440
-
The Push Back Probes (V04) V0417B180G15E33 are designed to deliver exceptional performance in a variety of applications. With a pitch of 4.00 mm and capable of operating within a temperature range of -45°C to +100°C, these basic contact probes ensure reliability even in challenging environments. Constructed with high-quality materials, including beryllium copper for the plunger and gold plating for both the plunger and barrel, they are optimized for durability and efficiency. The V04 series offers impressive mechanical specifications, including a preload of 400 cN, a maximum travel of 10 mm, and excellent pointing accuracy of ±0.10 mm, making them ideal for precision tasks.
-
Product
Push Back Probes (VF4) HVF4DS-30
1015615
-
The Push Back Probes (VF4) HVF4DS-30 delivers precision performance with a critical pitch of 4.0 mm, making it ideal for applications that require exact measurements and reliable operation. This product features a compact design with a total length of just 3.00 mm and an outer diameter of 3.60 mm, allowing for efficient integration into various systems and setups. The probe's construction ensures durability and consistent performance under typical operating conditions.
-
Product
Push Back Probes (VF100) VF10082B0004G15
1005135
-
The Push Back Probes (VF100) VF10082B0004G15 are engineered for precision and durability in electronic applications. This basic contact probe features a 2.54 mm pitch and operates effectively in temperature ranges from -45°C to +100°C, making it suitable for various demanding environments. With a continuous current rating of 5.00 A and a typical contact resistance of 30.00 mOhms, this probe ensures reliable performance under load, enhancing the reliability of your electronic connections.
-
Product
Pump Back Gas Analyser
Rapidox SF6 6100
-
The Rapidox SF6 6100 Pump Back is the latest in fully-automatic gas analysers, designed for controlling and monitoring the quality of SF6 in medium & high voltage gas insulated electrical equipment. Exceptional accuracy and stability are provided when measuring the purity of SF6 gas, through specially selected sensors.
-
Product
Antenna, Loop
EM-6874 | 20 Hz – 30 MHz
-
The EM-6874 Loop antenna is nominally used 20 Hz to 30 MHz and is designed for uncalibrated substitution measurements of shielding effectiveness as described by MILSTD-285, IEEE STD 299, and NSA-65-6.
-
Product
8 Direction Receiving Loops Antenna System
AS-SAL-12/20/30 - Mark II
-
The Array Solutions Shared Apex Loop™ Array (AS-SAL-12 Mark II, AS-SAL-20 Mark II, and AS-SAL-30 – Mark II) is an improved version of the new type of receiving antenna that delivers exceptional directivity in a compact package and is useable over a wide range of frequencies without need for adjustment. This array opens the door to a new class of compact, high performance, wideband receiving antennasdeveloped for both amateur and professional users.
-
Product
Push Back Probes (VF4) VF416B180G15
1005148
-
The Push Back Probes (VF4) VF416B180G15, with order code 1005148, is engineered for high precision applications, making it an essential tool in various electronic testing environments. Designed as a basic contact probe, its robust construction allows for continuous operation under varying temperatures, capable of enduring extremes from -45°C to +100°C. With a precise pitch of 4.00 mm, it guarantees minimal contact resistance at just 30 mOhm, enabling reliable electrical performance during testing.
-
Product
Push Back Probes (VF4) VF406B300G15
1002330
-
The Push Back Probes (VF4) VF406B300G15, identified by order code 1002330, exemplify precision engineering and robustness in design, suitable for a variety of applications. Built to operate in extreme temperatures ranging from -45°C to +100°C, these basic contact probes are specifically designed for optimum performance with a pitch of 4.00 mm, ensuring accuracy and reliability under demanding conditions. The versatile design includes a total length of 69.70 mm and a pointing accuracy of +/- 0.10 mm, ideal for intricate tasks that require meticulous care.
-
Product
PXI/PXIe Analog Output/Current Loop Simulator Module - 12 Channel
43-765-002
Analog Output Module
The 41/43-765-002 is a 12-channel Analog Output Module designed to meet the requirements of industrial control applications utilising current loops 4 – 20mA. It consists of up to four 16-bit, digital-to-analogue converters (DAC), capable of creating four current outputs each. Output current within 0mA - 4mA and 20mA - 24mA, give the ability to simulate error or extra signalling conditions. The ±24mA mode gives the ability to simulate either sourcing or sinking sensor.
-
Product
IntelliPoint RF - Loop Powered Level Switch
-
The IntelliPoint Loop Powered Two Wire provides a capacitance probe level switch with current output and “On-Board” self-diagnostics to ensure reliability and level sensing elements for a wide variety of temperatures, pressures, and materials.
-
Product
Push Back Probes (VF3) VF306B300G05
1006281
-
The Push Back Probes (VF3) VF306B300G05, with order code 1006281, are high-performance basic contact probes designed to meet various demanding applications. Engineered for precision, these probes operate within a temperature range from -45°C to +100°C, ensuring optimal performance in challenging environments. With a pitch of 3.00 mm and continuous current handling of up to 8.00 A, these probes deliver reliable electrical connectivity and minimal contact resistance, typically at 30.00 mOhm. This makes them an excellent choice for applications that require accurate and durable connectivity.
-
Product
Push Back Probes (VF4) VF405B300G15
1002316
-
The Push Back Probes (VF4) VF405B300G15 is an advanced basic contact probe designed for high-performance applications. It features a precision-engineered design that offers excellent thermal stability, capable of operating within a temperature range from -45°C to +100°C. This probe is specifically optimized for reliability and durability, making it ideal for use in critical environments where accuracy and responsiveness are paramount. Its compact design makes integration into existing setups seamless, providing the versatility needed for various applications.
-
Product
Push Back Probes (VF4) VF416B200G20
1005244
-
The Push Back Probes (VF4) VF416B200G20, with order code 1005244, are designed as basic contact probes ideal for precise measurements. These probes boast a robust operating temperature range of -45°C to +100°C, ensuring reliability in various environments. With a pitch of 4.00 mm, they deliver high-performing results for both industrial applications and intricate electronic testing.
-
Product
Push Back Probes (VF100) VF10017B180G05
1010313
-
The Push Back Probes (VF100) VF10017B180G05, with Order code 1010313, are an essential component for precise electronic applications. Designed with a basic contact probe structure, these probes offer flexibility and reliability, operating effectively in environments with a temperature range from -45°C to +100°C. Their 2.54 mm pitch makes them suitable for various circuit designs, ensuring excellent contact performance in demanding applications.
-
Product
Push Back Probes (VF3) HVF3RD
1043743
-
The Push Back Probes (VF3) HVF3RD is an essential tool designed for precision applications requiring robust electrical connections. With a brass shaft and specifically engineered for reliability, this product ensures seamless insertion and retention within its designated receptacles. The HVF3 model showcases a critical pitch of 3.00 mm, which is pivotal for ensuring appropriate electrical connectivity in various systems.
-
Product
36" Front to Back Stiffeners
FB-36
-
Additional aluminum extruded front-to-back stiffeners are available for Vertical Cabinets. Includes installation hardware
-
Product
Slotted And Loop Types
-
As a practical alternative to wire-wrap posts and turret terminals, loop and slotted test points are an economical choice for reliable test terminations. Allowing non-slip, safe circuit testing, terminals easily attach to J hooks, EZ hooks, grabbers, alligator clips, tips or probes. Space saving, ultra-low and low profile designs are available for high density PCB applications. High profile designs are also offered for difficult to reach applications.
-
Product
Push Back Probes (VF3) VF383B0004G15
1005898
-
The Push Back Probes (VF3) VF383B0004G15 are precision-engineered basic contact probes designed for high-performance applications. With a pitch of 3.00 mm (118 mil), these probes operate efficiently across a temperature range of -45°C to +100°C, making them suitable for various environments. The design features ensure a robust lifespan, accommodating a continuous current of 8.00 A with a typical contact resistance of just 30.00 mOhm, which is critical for maintaining signal integrity in electrical connections.
