Loop backs
connect input to ouput to test I/O loop.
-
Product
Model QLS 4-20 mA Loop Splitter / Retransmitter
-
Generates up to four individually grounded and individually adjustable 4-20 mA loops from a single 4-20 mA or 0-10V input. Overcomes problems which occur when the same 4-20 mA signal is applied to multiple loads in series. Allows outputs to have different grounds, and allows individual loops to be opened without affecting signal to other loads.
-
Product
Push Back Probes (VF3) VF383B0008G15
1007117
-
The Push Back Probes (VF3) VF383B0008G15, assigned order code 1007117, represents an efficient solution for contact probing across a variety of applications. With an operational range of -45°C to +100°C, these basic contact probes are designed for robust performance in both low and high-temperature environments. Featuring a pitch of 3.00 mm, the probes ensure dependable connectivity, especially in precise applications where accuracy is paramount. Equipped for a continuous current of 8.00 A, these probes provide the electrical capacity needed for demanding tasks while maintaining a typical contact resistance of just 30 mOhm, thus optimizing efficiency and minimizing energy loss.
-
Product
Peel Back Force Tester
PBFT
-
Precisely measure the peel back force of carrier tape to verify your packaging systems are within specification. Results can be printed and stored with the outgoing product.
-
Product
PXI Analog Output / Current Loop Simulators
-
These modules are aimed at simulating industrial control transceivers, utilizing 4–20mA current loops. The modules include built-in relays for shorts and opens functionality enabling fault insertion testing on every channel and also enable slew rates to be programmed so that different sensors can be effectively mimicked.
-
Product
Push Back Probes (VF4) VF417B300G20
1014392
-
The Push Back Probes (VF4) VF417B300G20 are carefully engineered to deliver exceptional performance in a diverse range of applications. Designed with a basic contact probe structure, these probes are versatile enough to meet the demands of various environments, maintaining a temperature range of -45°C to +100°C. With precise specifications and robust materials, they ensure consistent operation and reliability.
-
Product
PXI/PXIe Analog Output/Current Loop Simulator Module - 4 Channel
43-765-004
Analog Output Module
The 41/43-765-004 is an 4-channel Analog Output Module designed to meet the requirements of industrial control applications utilising current loops 4 – 20mA. It consists of up to four 16-bit, digital-to-analogue converters (DAC), capable of creating four current outputs each. Output current within 0mA - 4mA and 20mA - 24mA, give the ability to simulate error or extra signalling conditions. The ±24mA mode gives the ability to simulate either sourcing or sinking sensor.
-
Product
Current Loop Adapter
OP-1C
-
This adapter supports current loop communications.The kit incorporates a communications circuit with photo-coupler isolation and constant-current power supply of insulated type, thus realizing not only monitoring but also easy communications testing with passive or active current loop devices.
-
Product
IndustryPack system trouble shooter
IP-DEBUG-IO II
-
IndustryPack system trouble shooter providing testpoints on all of the IP IO signals. Loop back is as easy as wire-wrap. Custom feedback signals are supported with socket and power connector support. Now with 2 ribbon cable connectors to support in system debugging.
-
Product
Closed Loop Hall AC/DC Current Sensor
CYHCS-SH
-
ChenYang Technologies GmbH & Co. KG
This Hall Effect current sensor is based on closed loop compensating principle and can beused for measurement of DC and AC current, pulse currents etc. The output of thetransducer reflects the real wave of the current carrying conductor.
-
Product
ThePoint - Loop Powered Level Switch
-
ThePoint Loop Powered two wire level switch provides a current output and has hazardous area approvals making it a good choice for most of your point level application requirements. ThePoint level sensing device offering is suitable for most temperature, pressure, and material types.
-
Product
Loop Resistance Measuring Device According to DIN EN 61557-3 (VDE 0413-3)
-
PeakTech Prüf- und Messtechnik GmbH
A loop tester which is used to test the safety of electrical systems. These device measures the impedance of the short-circuit loop between the outer conductors of a circuit, whereby the probable short-circuit current is calculated. The protection of the circuit (miniature circuit breaker) must therefore trigger at a lower current than the expected short-circuit current, in order to avoid excessive heating of the lines and thus a fire risk. The PeakTech 2715 is due to its function and its robust design almost indispensable when performing new installations, but also for general checking of electrical systems, this device is the ideal companion.
-
Product
Push Back Probes (VF3) VF383B0001G15
1005124
-
The Push Back Probes (VF3) VF383B0001G15 is designed for optimal performance in applications requiring precise measurements and reliability under extreme temperatures ranging from -45°C to +100°C. With a pitch of 3.00 mm (118 mil), these probes ensure accurate connections with minimal resistance, featuring a typical contact resistance of only 30 mOhm. Engineered with a robust preload of 300 cN and a maximum travel of 5.50 mm, these probes facilitate effective and reliable contact under varying conditions while maintaining a pointing accuracy of +/- 0.10 mm, making them an ideal choice for sophisticated electronic assemblies.
-
Product
Push Back Probes (VF4) VF483B0010G20
1011473
-
The Push Back Probes (VF4) VF483B0010G20, also known as Basic Contact Probes, are essential tools designed for precise applications in various electronic setups. Engineered with a pitch of 4.00 mm (157 mil), these probes function effectively across a temperature range of -45°C to +100°C, making them suitable for a wide array of environments and complex tasks. The probes feature a robust design with a continuous current capacity of 10.00 A and a typical contact resistance of just 30 mOhm, ensuring reliable electrical connectivity and performance during usage.
-
Product
4-20mA Current Loop USB Data Logger
EL-USB-4
-
This data logger measures and stores up to 32,000 current loop readings over flashing red and green LEDs. The data logger features a pair of screw terminals and is supplied complete with a a 4-20mA d.c. measurement range. The user can easily set up the logging rate and start time, and download the stored data by plugging the module straight into a PCs USB port and running the purpose designed software under Windows 2000, XP or Vista
-
Product
Push Back Probes (VF4) VF483B0009G15
1009131
-
The Push Back Probes (VF4) VF483B0009G15, with order code 1009131, is engineered for high-performance applications with precision and reliability. Designed as a basic contact probe, it performs optimally under varying conditions, supported by a wide operational temperature range of -45°C to +100°C. This ensures that the probes can be utilized across diverse environments without compromising functionality. The VF4's structural integrity is bolstered by high-quality materials, employing beryllium copper for the plunger, providing excellent electrical conductivity and durability over extended use.
-
Product
Push Back Probes (VF3) VF317B230G05
1008136
-
The VF317B230G05 Push Back Probe is engineered to provide robust performance in a variety of applications, thanks to its precise mechanical and electrical specifications. With a compact design that maintains a pitch of 3.00 mm (118 mil), this basic contact probe can operate effectively in temperature ranges from -45°C to +100°C. The probe supports a continuous current of up to 8.00 A while ensuring a typical contact resistance of just 30.00 mOhm, thus ensuring reliable connections even in demanding settings.
-
Product
Push Back Probes (VF3) VF306B270G15
1005906
-
The Push Back Probes (VF3) VF306B270G15, with order code 1005906, are engineered to meet stringent standards for high performance in various applications. These basic contact probes are designed with a minimal pitch of just 3.00 mm (118 mil), allowing for precise measurements and optimal functionality in tight spaces. Capable of operating within a temperature range of -45°C to +100°C, these probes are versatile enough for diverse environments, ensuring reliability in challenging conditions.
-
Product
Push Back Probes (VF4) VF406B240G25
1002328
-
The Push Back Probes (VF4) VF406B240G25 is a high-quality basic contact probe designed for precision applications. With a pitch of 4.00 mm (157 mil), it operates efficiently in a temperature range of -45°C to +100°C, making it suitable for various environments. The probe supports a continuous current of up to 10.00 A, ensuring reliable electrical performance. Its typical contact resistance is impressively low at 30.00 mOhm, allowing for optimal signal transmission and minimizing energy loss.
-
Product
Loop Meter
MZC-310S
-
The MZC-310S is a professional portable meter for testing electrical installations with over-current circuit breakers. The instrument measures short-circuit L-PE, L-N and L-L loop and prospective short-circuit loop current. A measurements can be done either with low testing current (up to 42A) with 2-pole method or high testing current (up to 280A) with 4-pole method that enables measurements with very high accuracy and resolution.
-
Product
Push Back Probes (VF100) VF10017B180G10
1002251
-
The Push Back Probes (VF100) VF10017B180G10 are essential for applications requiring a reliable contact probe with precise measurements. Designed for optimal performance, these probes have a pitch of 2.54 mm, allowing for efficient connectivity in tight spaces while operating under extreme temperature conditions ranging from -45°C to +100°C. Their sturdy construction and high-quality materials, such as beryllium copper and brass, ensure long-lasting durability and functionality in various demanding environments.
-
Product
Helmholtz Coils / Radiating Loops
-
Formed by a pair of conducting circular coils with many turns, each carrying a current. The coils are separated by a distance equal to the radius of the circular loops.
-
Product
16 Hole Back Extension
9561-BE
-
Enclosed version of the cabling "doghouse" for the Hawk/PC chassis with rear panel punched to accommodate 16 50/37 pin d-sub connectors. Hinged for access to the rear of the DG-style backplane.
-
Product
3-Dimensional Loop Antenna Van Veen
-
Loop Antenna System ( LAS )3-dimensional large loop antennadiam. 2 macc. EN 55015 / CISPR 15
-
Product
Push Back Probe HVF100SHAT
1010181
-
The HVF100SHAT is a specialized push back probe, specifically designed to enhance connectivity and reliability in various electronic applications. As part of the HVF100 family, this probe boasts a robust design, with critical dimensions that support seamless integration into your projects. The original description highlights its role in performing essential functions while ensuring high durability and ease of use.
-
Product
Push Back Probes (VF4) VF417B300G10
1012104
-
The Push Back Probes (VF4) VF417B300G10, with order code 1012104, is designed for high-performance applications where precision and reliability are essential. This basic contact probe operates within a temperature range of -45°C to +100°C, making it suitable for various environments. Its 4.00 mm pitch ensures compatibility with a wide range of devices, while the continuous current rating of 10.00 A and typical contact resistance of just 30 mOhm highlight its efficiency in electrical performance. The innovative design incorporates a robust spring mechanism, achieving a preload of 300 cN and a spring force of 1000 cN, which guarantees reliable contact under varied operational conditions.
-
Product
Local Loop Simulator 128 Channels
458-CC-16/458-CM
-
FEATURES: Accepts 1 to 16 Line Modules; User-Friendly Interface; Multiple Configurations; Field-Upgradeable Software; One-Year Warranty/Calibration. The 458 Series 16-slot Chassis, which consists of the 458-CC chassis and one of three control modules, provides a wide variety of configurations through use of up to 16 plug-in Line Modules.
-
Product
Push Back Probes (VF4) VF416B140G20
1005231
-
The Push Back Probes (VF4) VF416B140G20, with order code 1005231, are engineered for optimal performance in precision measurement tasks. Designed as a basic contact probe, these components excel within a temperature range of -45°C to +100°C, making them suitable for diverse applications. The probes feature a 4.00 mm pitch and deliver consistent electrical performance with a continuous current capability of 10A and a low typical contact resistance of 30 mOhm. This ensures reliable signaling in critical electronic systems.
-
Product
Push Back Probes (VF3) VF317B150G10
1013027
-
The Push Back Probes (VF3) VF317B150G10 is a high-performance contact probe designed for precision applications. This basic contact probe features a specialized design with a pitch of 3.00 mm, ensuring effective and reliable connectivity across a variety of uses. The temperature range of -45°C to +100°C makes it suitable for demanding environments, ensuring that it can withstand extreme conditions without compromising on performance. With a preload of 200 cN and a typical contact resistance of 30 mOhm, this probe exhibits excellent electrical stability, delivering consistent results over prolonged use.
-
Product
Push Back Probe VF483B0008G20
1004841
-
The Push Back Probe VF483B0008G20 (item number 1004841) is designed to verify that terminals are correctly locked in connector housings. VF483B0008G20 can verify that a terminal remains securely locked in the connector housing and is not pushed back beyond the permitted position during contacting. VF483B0008G20 operates with 2000 cN spring force and 5 mm nominal travel. Pointing accuracy for VF483B0008G20 is specified as ±0.1 mm. The electrical rating of VF483B0008G20 combines 10 A continuous current with 30 mΩ typical contact resistance. For installation, VF483B0008G20 uses an M2.5 x 0.35 thread.
-
Product
Closed Loop Precise Hall AC/DC Current Sensor
CYHCS-LF
-
ChenYang Technologies GmbH & Co. KG
This Hall Effect current sensor is based on closed loop compensating principle and can be used for accurate measurement of DC and AC current, pulse currents etc. The output of the transducer reflects the real wave of the current carrying conductor.
