Embedded System
-
Product
Generation Management System
-
ETAP Generation Management System is used to monitor, control, and optimize the performance of generation and transmission systems. GMS provides system balance and optimization changes to meet network security, economic, operational, regulation, and environmental requirements.
-
Product
Barcode Verification Systems
REA ScanCheck 3
-
The REA ScanCheck 3 is an universal, battery-operated, high-performance barcode verification device which operates in accordance with current standards. The verifications document compliance with quality goals in production and monitoring of barcodes on data storage devices and products of all kinds. The measurement principle is based on a laser scanner optimized for verifications. This makes contact-free measurement, largely independent of handling influences, possible. For mobile use on site, the device operates self-sufficiently, independent of the power network with standard, rechargeable batteries. The operating system and application software support multiple languages.
-
Product
Interface Systems
-
To build a complete and accurate force measurement system, it’s essential to integrate a compatible sensor, instrumentation, and proper cables and connectors. Start with a high-quality load cell or torque transducer that suits your application needs. Pair it with compatible instrumentation, such as a signal conditioner, digital display, or data acquisition system, that can properly excite the sensor and interpret its output. To ensure signal integrity and reliable performance, use shielded, appropriately rated cables and connectors designed for your environment and sensor type. When all components are correctly matched and system calibrated, the result is a precise and dependable measurement system.
-
Product
Oil Test System
-
The Oil Test system Model OTS 2K1 is portable transformer oil Test system. It is a specially designed for accurate measurement of Loss Factor, Permitivity & Volume Resistivity Measurement of Transformer Oils & Petroleum jellys. The test frequency is 50 Hz . The system is provided with Mode Selector Switch so that once the oil cell is connected, it can measure all Three parameters in different modes without handling the test leads.
-
Product
WEIGHING SYSTEM TESTING
1006
-
The Tester 1006 has a simultaneous control function of up to 4 load cells in any weighing system, upload and download function for programming the DAT and MC 302 series instruments, but it can also be used as a Calibrator and Peak detector. It is very useful for the correct mechanical installation and for fault diagnosis. The Tester 1006 is supplied as standard with cable for connection to our junction boxes / sum mod. CEM 4 / C and CGS 4 / C. Simultaneous display of the signal of each individual load cell allows to control the entire weighing system, weight distribution, overloads, faulty cells and faulty connections. OUT OF PRODUCTION. Pavone systems provides a new version of Tester 1006: Tester 1008.
-
Product
Photovoltaic/Solar Metrology System
-
Multi-channel thickness, TTV and bow measurement module for in-process monitoring of solar/photovoltaic wafers and other materials.
-
Product
Picosecond Timing System
-
Specialized, high-precision electronic system designed to generate, distribute, and measure timing pulses with a resolution.
-
Product
Free Ride Systems
-
For ADAS and NCAP maneuvers to be truly comparable in real-world testing, one thing is paramount: repeatability. Free-running systems provide an automated setup that reduces driver variation and accurately reproduces scenarios.
-
Product
Imaging Systems & Components
-
Thorlabs offers a wide selection of laser scanning, widefield imaging, and OCT imaging systems, including multiphoton microscopes, confocal microscopes, electrophysiology rigs, swept-source OCT systems, and spectral-radar OCT systems.
-
Product
System on Demand (SoD): HiL Test System
-
System on Demand (SoD) is a unique, agile and standardized principle to design HiL test systems. SoD shifts the focus away from technical-only solutions to a proven automated design process – targeting our customer‘s real issues: time, budget and flexibility.
-
Product
Species-Specific Recognition System
-
Information System Technologies Inc.
Feral swine (Sus Scrofa) populations in the United States inflict serious and growing ecological and economic impacts to the farming and ranching ecosystems where the population continues to grow and invade new territory. These invasions ultimately impact the security, quality, and safety of the food supply and water resources coming from these regions. Scientific studies highlight the consequences of the growing feral swine population and the challenges of effectively controlling additional growth. Feral swine are an invasive species well known for destroying crops, damaging farmland by rooting, destroying natural resources such as water supplies, and spreading disease to livestock, other wildlife, and humans. In addition to agricultural impacts, evidence demonstrates many negative effects on local ecosystems and indigenous wildlife.
-
Product
Weather Detection Systems
-
General offers weather detection systems that use a base station to display inputs received wirelessly from remote sensors. The RGR150 can track rainfall amounts as well as temperature and/or relative humidity. WS821 & WS831DL Weather Detection Systems are full-featured wireless weather stations that add wind speed readings and track trends in barometric pressure that can serve as the basis of a short-term weather forecast. Barometric pressure is also available from a dedicated wireless station (the DBAR880), and the original weather forecasterthe ABAR300 Analog Barometer.
-
Product
Leak Test System
NorCom 2020
-
The NorCom 2020 batch inspects up to 500 devices per cycle for both gross and ultra-fine leaks. The system incorporates a patented full field interferometer that produces reliable, repeatable leak test results. The system eliminates the need for helium mass spectroscopy or krypton testing for fine, and bubble leak testing for gross leaks.
-
Product
Pass-by Noise System
-
Vehicle Pass-by Noise TestingA very flexible Pass-by noise test system for characterizing the overall acoustic signature of any vehicle. Our solution brings a simpler, more effective and cheaper way to obtain accurate velocity and acceleration results for the Pass-by Noise test.
-
Product
Combustion Analysis System
DS-3000 Series
-
With the ongoing research and development for improving combustion technologies (HCCI, EGR, etc.), new power sources (HEV and PHEV) and new fuels (biodiesel and natural gas) , development of more fuel-efficient and smaller engines are demanded. The DS-3000 series Engine Combustion Analyzer meets such growing expectations with the new, more powerful hardware.
-
Product
General-Purpose Analyzer Systems
-
Brüel & Kjær Sound & Vibration A/S
Sonoscout is a system that uses an app on an iPad to control a wireless data acquisition unit. This rugged front-end can connect up to 12 transducers, such as a binaural headset for in-vehicle recording at the user's ear positions. The front-end is battery-powered and transmits data to the iPad for recording or records directly to SD card inside the front-end, avoiding the need to use Wi-Fi. The intuitive app makes it simple to either perform basic analysis, or to replay and listen to files in order to validate recordings before exporting them for further analysis and archiving in PULSE Reflex.
-
Product
Collaboration Systems
-
Solutions for small meeting, huddle, or collaboration spaces that foster group sharing using technology.
-
Product
Metrology System
Aspect
-
Memory density increases with both layer-pair scaling and tier stacking for memory stacks well over 200 pairs. The Aspect metrology system was designed with these future architectures and scaling strategies in mind. Aspect metrology is demonstrating performance superior to X-ray systems across multiple customer devices through a revolutionary infrared optical system providing full profiling capability to enable critical etch and deposition control, with the speed and process coverage that customers require.
-
Product
Physiology & Neuroscience Systems
-
Below are two examples automated microscopy solutions, tailored towards physiology or neuroscience applications. Many of our components can be used to automate your microscope.
-
Product
Relay Testing System
UNO
-
With high power outputs package in an extremely compact and rugged system, the UNO has a tremendous power-to-weight ratio. The design incorporates the latest in modern digital microprocessor technology to achieve unbeatable output characteristics in terms of power, accuracy, low distortion, and dynamic capability. This hi-tech solution enables the testing of many different functions required in relay testing without the need of additional accessories.
-
Product
VLF Diagnostics System
PHG 80 TD
-
Cable testing and diagnostics with the BAUR PHG 80 TD. The combination of the PHG 80 programmable test generator with the BAUR dissipation factor measurement system produces the cable testing and diagnostics system PHG TD. It is operated via PC control. Dissipation factor measurement and diagnostic testing sequences can be programmed in the menu, after which the dissipation factor measured values are automatically determined in various voltage steps and a final evaluation is conducted.* Biggest dynamic range of tan delta measured values from 1 to 10-4 with a cable capacitance >10 nF to 20 uF* High resolution +/- 1x10-5 applicable even in new PE/XLPE cables* Insensitive against interferences due to complete mains separation* Lowest time required for assessing a medium-voltage cable (3-phase approx. 1 hour)
-
Product
Immunity Development System
-
Used for EMI suppression in printed circuit boards during the development phase. The developer can use the E1 set to quickly identify the causes of burst and ESD interference. This allows the developer to design suitable measures to solve the causes of the interference. It can also be used to test the effectiveness of the measures taken.
-
Product
Power Supply System
PL508
-
The PL508 is a high sophisticated, high density, programmable 8-channel moderate floating low-voltage power supply system. Using the remote monitoring and control features it can be used to supply a large numbers of external load-channels with high power consumption also over long distances.
-
Product
Nano-ITX Embedded Board
-
The Nano-ITX form factor is designed as a high integrated native x86 embedded platform, measuring a mere 120 mm x 120 mm which measures in at 50% smaller than the Mini-ITX form factor. The Nano-ITX form factor is available with a rich feature set and is targeted at the fast-emerging embedded markets, allowing developers to highly customize their system designs in the low-profile and fully-configured embedded devices.
-
Product
Embedded MXM GPU Module With NVIDIA RTX™ ADA 2000
EGX-MXM-AD2000
Graphics Card
- NVIDIA Ada Lovelace Architecture- Standard MXM 3.1 Type A (82x70 mm)- PCIe Gen 4 x8 Interface- 3072 CUDA® Cores, 24 RT Cores, and 96 Tensor Cores- 14.5 TFLOPS peak FP32 performance
-
Product
Instrument Systems Goniophotometers
-
Konica Minolta Sensing Americas, Inc
If you need assistance measuring angle dependent spectral measurements, Instrument Systems has developed a comprehensive line of goniophotometers to meet your needs. Instrument Systems Goniophotometers are used to analyze angle dependent spatial radiation properties of SSL lamps and LED modules.
-
Product
Microphone System
378B02
-
This model includes a 1/2" microphone cartridge, a mated preamplifier with TEDS, and system calibration.
-
Product
Measurement System
DPS
-
EYCOM develops and manufactures highly accurate and dependablemeasurement systems for permittivity, dielectric loss tangent, or permeabilityby leveraging its accumulated experience and expertise over a long period of time.Capitalizing on such experience and expertise, KEYCOM is committed todeveloping customized solutions for wide range of specific applications such asflexible circuit board, semiconductor, thin film, millimeter wave and microwave frequency board,
-
Product
Laser Processing Systems
-
Veeco delivers revolutionary Low-Cost-of-Ownership, HVM production-proven thermal annealing solutions at the most advanced technology nodes. Making a Material Difference with Leading Laser Spike Annealing Technology
-
Product
Control Systems Projects
-
Precision Development Consulting Inc
Fast Open Loop temperature control system, Batch CVD temperature control system, Single Wafer Temperature control system, Disk Drive Spindle Motor Control, Wafer Indexer Motor Control





























