Stepping Motor
A device that translates electrical pulses into precise mechanical movement. The output shaft may deliver rotary or linear motion. (www.seanet.com)
See Also: Electric Motor, Servomotor
-
Product
Small Step Broadband Synthesizer
SBC Series
-
*Connectorized Package *Fine Resolution Design *Broadband Designs Available *Low Phase Noise *Ultra-Low Spurs *Optional Internal Reference
-
Product
Reduced Voltage Motor Starting Panels by Reactors
-
A method to limit motor starting current is a series reactor. Iron core or air core reactors can be used for starting purposes. If an air core is used for the series reactor then a very efficient and reliable soft starter can be designed which is more suitable for high MW ratings of synchronous/induction motors at MV levels. The reactors are designed with taps.
-
Product
Step Probes (F732SP) F73211B1022G150SP
1006694
-
The Step Probes (F732SP) F73211B1022G150SP are precision-engineered tools designed for high-performance applications requiring accuracy and durability. With a pitch of 2.54 mm and operational temperature range from -45°C to +100°C, these probes are tailored for a variety of environments. Their robust construction features a plunger made of beryllium copper, plated with gold for enhanced conductivity and corrosion resistance, further supported by a brass barrel also plated with gold, ensuring longevity under rigorous conditions.
-
Product
Digital Step Attenuators
-
Analog Devices provides a range of broadband IC digital attenuators that come in low cost, leadless surface mount packages. Our digital attenuator family offers excellent attenuation and includes off chip ac ground capacitors for near dc operation, making it ideal for an extensive number of RF and IF applications.
-
Product
Motor Exhaust Gas Sulfur Analyzer
MEXA-1170SX
-
The MEXA 1170 SX is a new instrument used to measure sulfur for after treatment and transient lubricant oil consumption. The analyzer uses ultraviolet fluorescence (UVF) for detection and it can be operated in a total sulfur mode, analyzing sulfur oxides, hydrogen sulfide and all organic sulfur compounds. An inorganic sulfur mode will analyze hydrogen sulfide and the sulfur oxides. The final operational mode will analyze just the sulfur oxides. Any one of these modes can be selected by the user from a front panel interface.
-
Product
Step Probes (F731SP) F73112B9001G110SP
1010717
-
The Step Probes (F731SP) F73112B9001G110SP, with order code 1010717, are engineered to provide high precision and reliability in various applications, thanks to their robust design and carefully selected materials. Designed for optimal performance, the Step Probes feature a pitch of 2.40 mm, enabling close contact measurements while withstanding temperature fluctuations from -45°C to +100°C. This model embodies innovation with a focus on durability and efficiency, making it an essential tool for technicians and engineers alike.
-
Product
ASTRO BRUSHLESS MOTOR
4535
-
The purpose of the development of the 4535 was to deliver the same quality and reliability of our 32XX motors but at nearly 4x the power. Starting at the core of the motor, the 4535 uses the highest grade of sintered samarium-cobalt magnet. Unlike hobby grade neodymium magnets, these samarium-cobalt magnets are able to withstand high operating temperatures without losing magnetic strength or experiencing permanent demagnetization. Ultra-thin laminations are used in the stator to ensure minimal iron losses and maximize efficiency. All components of the motor are rated to at least 200°C to handle high continuous and burst power. Finally, to ensure manufacturing quality, all 4535 motors are designed and manufactured in Astro Flight's facility in Irvine, CA.
-
Product
Step Probes (F732SP) F73216B0096G300SP
1030616
-
The Step Probes (F732SP) F73216B0096G300SP is a highly engineered probing tool tailored for precision measurements in various applications, featuring a robust design and advanced functions. Recognized for its exceptional reliability, this Step Probe enhances efficiency with its continuous current capacity of 5.00 A and a low typical contact resistance of just 20.00 mOhm, facilitating accurate and stable electrical connections.
-
Product
Step Probes (F733SP) F73316B0065G300SP
1000972
-
The F733SP Step Probe (Order Code: 1000972) is engineered for precision and durability, capable of operating within a temperature range from -45°C to +100°C. With a pitch size of 4.00 mm, this probe is designed for high-performance applications requiring exact measurements. It features a continuous current rating of 10 A, ensuring reliable functionality in demanding electronic environments. The typical contact resistance is impressively low at 25 mOhm, making this step probe a vital component in ensuring optimal performance in electrical applications.
-
Product
Step Probe F73016B0007G110SP
1019092
-
The Step Probe F73016B0007G110SP (item number 1019092) is a Spring Contact Probe with a disc-shaped contact area for position and presence testing. On F73016B0007G110SP, electrical contact is established only at the intended penetration depth, making the Step Probe suitable for position and presence checks on connectors. F73016B0007G110SP is suited to contacts located in housings, recesses or difficult-to-access areas because its disc head makes contact only at a defined penetration depth. Key mechanical specifications include pitch 1.27 mm / 50 mil, step diameter 1 mm, pin diameter 0.5 mm, pin length 0.6 mm, spring force 110 cN, pointing accuracy ±0.08 mm. F73016B0007G110SP is rated for 3 A continuous current with a typical contact resistance of 50 mΩ. The stepped contact geometry of F73016B0007G110SP makes electrical contact only in the intended installation position and can therefore help detect missing or incorrectly positioned terminals.
-
Product
Motorized Material Testers
-
Motorized force/displacement testers record both force and displacement. Programming is facilitated by the unique program dial using plain language menu screens.
-
Product
Step Probes (F733SP) F73316B1017G150SP
1007425
-
The Step Probes (F733SP) model F73316B1017G150SP, identified by order code 1007425, is designed for precision applications requiring exceptional reliability and durability. Built with a robust design, these probes operate effectively across a wide temperature range from -45°C to +100°C, ensuring adaptability in various environments. The innovative engineering behind the F733SP includes a defining pitch of 4.00 mm, making them suitable for diverse electronic testing needs. Whether it’s for high-precision circuits or sensitive semiconductor testing, these probes are an essential tool for any technician's arsenal.
-
Product
Step Probes (F732SP) F73216B1060G150SP
1009989
-
The Step Probes (F732SP) F73216B1060G150SP are meticulously designed for precision applications, offering superior performance through their high-quality construction and advanced specifications. With a pitch of 2.54 mm and a wide operational temperature range of -45°C to +100°C, these probes are ideal for demanding environments. They are designed to deliver reliable results with a continuous current capacity of up to 5.00 A and a typical contact resistance of just 20 mOhm, ensuring excellent electrical performance under varying conditions.
-
Product
Step Probe F72012B0001G110SP
F72012B0001G110SP
-
The F72012B0001G110SP Step Probe is a high-performance solution designed for a range of applications, including semiconductor and electronic testing, offering unparalleled precision in a compact form factor. Built to endure harsh conditions, this probe can operate in temperatures between -45°C and +100°C, making it a versatile choice for challenging environments. With a pitch of 1.27 mm (50 mil), it is equipped to handle intricate testing requirements effectively.
-
Product
Ultra-High Precision Motorized Rotation Stages
RAUK
-
Model:RAuK Ultra-High Precision Motorized Rotation StagesRAuK series is developed on the basis of RAK series,import grating internal,achieve 360° closed-loop,closed-loop resolution is 1.8〞(RAuK100)or 1.2〞(RAuK200).It has passed so many customers test (in china, haerbin university, and so on),application:ultra-high angle postion, for example:GPS tracking systems,ultra-high precision multi-dimension scanning measurement,ultra-precision laser processing and so on .Characteristic: ◆ultra-precision grating internal, closed-loop resolution is 1.8〞(RAuK100)or 1.2〞(RAuK200). in conjunction with MC600 controller, achieve 360° closed-loopPrecision worm has passed special treatment and wear-resistant materials,achieve ultra-high position accuracy and better durability, precision of retentionimport ultra-high steel cross roller rail, ensure axial runout,radial runout and related specification in conjunction with zolix special precision grinding craft(including Al base precision grind),high load capacity,can be used in vertical direction,even invertassemble craft and test method that higher international, ensure all the products performanceseparate design of motor interface and circle grating singal, you can choose it according to requirementsachieve absolute postion by zero switchplanning three phase stepper motor and servo-motor of this series and other sizes
-
Product
Stepper Motor,Precision Linear Stages,Application for Labs
PSAXXX-11-X
-
Model:PSAXXX-11-X Stepper Motor,Precision Linear Stages,Application for Labs Stepper motor and RS232 interface combine with SC300,MC series controller, achieve automatical control.Grinding ball screw ,linear slide and elastic couplings adopt high-quality products ,provide quality assurance .The design of limited switches and zero switch protect products and supply convenience;Standard interface is convenient for singal’s output.The back of motorized stages has handwheel , it is for convenience for adjustment;Standard hole is so easy for combine with other units, ensure convenience for multi-dimensional system;standard stepper motor and DB9 interface, choose to any controller according to requiremment
-
Product
Motor Test for Electric Scooters
-
*The performance data of electric motors, in the majority of all cases, is performed by a brake test. Power input is calculated from current and voltage. Torque and power output are measured with a brake. It is important to reach, for each point, a persistent temperature. In case of large outer rotor BLDC motors, which are usually used for electric scooters, this traditional procedure may take many hours to complete, and is very complicated. *For several years, an innovative motor tester of MEA Testing Systems Ltd. is on the market. This testing system avoids any temperature confusion by testing a motor at constant temperature over the entire speed range. The test procedure is very fast, and gives the full load performances, including PWM current, voltage, torque, and driver efficiency, from stall up to no load. *During the test procedure, the motor is freely accelerated from stall to no load speed. The load of the motor is only the predetermined inertia of the rotor. From the moment of inertia and the acceleration, the torque of the motor is calculated and, also, the power output over the whole speed is given. Since the entire measuring time, depending on the motor size, is usually less than one second, the motor has no time to warm up. It remains at room temperature.
-
Product
Motor Driven Actuator
NJ-SERVO Series
-
The NJ-SERVO electric motor driven actuator utilizes an electric motor drive system. High accuracy test control is enabled by a special servo motor and stroke displacement measurement sensor. In addition, the system configuration is simpler in comparison to hydraulic actuators, so it is easy to maintain, and achieves power savings and space savings. This system accommodates a wide range of tests with a high degree of expandability. This includes everything from endurance evaluations of the main body and assemblies of automobiles, aircrafts, and other transportation equipment to endurance evaluations of stand-alone parts; from multi-axis tests combining multiple actuators to uniaxial tests; and from sine waves to working waveform simulation tests.
-
Product
Step Probes (F731SP) F73111B0014G300SP
1000960
-
The Step Probes (F731SP) F73111B0014G300SP is a highly specialized testing tool designed for precision applications, combining advanced materials with thoughtful engineering. With a pitch of 2.40 mm (94 mil), these probes can operate effectively within a temperature range of -45°C to +100°C, making them suitable for a variety of demanding environments. The combination of beryllium copper plating for the tip style and brass for the barrel ensures excellent conductivity and durability, while the gold plating adds an extra layer of protection against oxidation and wear. This versatility is essential for technicians and engineers working in fields that require stringent performance standards and reliability.
-
Product
Automatic Production Tester for Electric Motor Stators
MTC 3
-
The fully automatic MTC3 stator testers test your windings reliably and quickly for possible insulation faults via our patented surge voltage test.After connecting the test object completely the test is performed with an automatic switching of the connections and the test methods. The MTC3 evaluates each test step. At the end of the complete test process it provides a clear and reproducible GO or NO GO-statement.
-
Product
Step Probes (F732SP) F73216B0076G300SP
1000992
-
The Step Probes (F732SP) F73216B0076G300SP are designed for precision connectivity in various applications, ensuring high reliability during testing and signaling. With a pitch of 2.54 mm and an extensive temperature range of -45°C to +100°C, these probes are built to perform under extreme conditions while maintaining operational efficiency. The continuous current rating of 5.00 A ensures that the probes can handle demanding electrical requirements without compromising performance. The unique design, with nominal travel of 4.00 mm and a maximum travel of 5.00 mm, allows for accurate positioning, critical in precise measurement tasks.
-
Product
Step Probe F73111B0012G150SP
1031758
-
Step Probes (F731SP) are engineered for precision and reliability in various applications. The F73111B0012G150SP model stands out in this category, offering a robust temperature range from -45°C to +100°C, making it suitable for demanding environments. Designed with a pitching specification of 2.40 mm and a preload of 50 cN, this probe allows for effective contact under various operational scenarios. Its unique construction features a beryllium copper plunger with gold plating, ensuring excellent conductivity and durability.
-
Product
Photocouplers/Optocouplers Motor Drive
-
The PS9xxx series, a range of motor-driving photocouplers (optocouplers), feature a high isolation voltage, high temperature operation, high output current, and high-speed switching.
-
Product
Step Probes (F731SP) F73111B0025G150SP
1029842
-
The Step Probes (F731SP) F73111B0025G150SP, identified by order code 1029842, are engineered for precision and reliability in demanding electrical applications. With a pitch of 2.40 mm (94 mil), these probes are designed to endure a temperature range from -45°C to +100°C, ensuring functionality even in extreme conditions. Their robust build features a plunger made of beryllium copper with a gold plating to ensure optimal conductivity, while the brass barrel, also plated in gold, enhances durability and performance.
-
Product
Step Probes (F733SP) F73316B1004G150SP
1006288
-
The Step Probes (F733SP) F73316B1004G150SP are meticulously designed for precision applications, ensuring reliability and efficiency. With a pitch of 4.00 mm (157 mil), these probes feature a wide operational temperature range from -45°C to +100°C, making them suitable for diverse environments. Their robust design is enhanced with a preload of 50 cN and a spring force of 150 cN, allowing for optimal performance and accurate contact under varying pressures. With a nominal travel distance of 4.00 mm and a maximum travel of 5.00 mm, users can expect exceptional responsiveness and pinpoint accuracy of +/- 0.10 mm when deployed in intricate connections.
-
Product
Step Probes (F732SP) F73216B1038G150SP
1008507
-
Introducing the Step Probes F732SP, model F73216B1038G150SP, a critical tool engineered for precision in diverse applications. This product offers a pitch of 2.54 mm (100 mil) and operates efficiently in a temperature range from -45°C to +100°C, making it versatile enough for various environmental conditions. The plunger is constructed from high-quality beryllium copper, plated with gold, to ensure excellent conductivity and durability. With a maximum travel of 5 mm and a nominal travel of 4 mm, and a preload of 60 cN, these probes are designed to deliver consistent performance under pressure.
-
Product
Step Probes (F733SP) F73311B1030G150SP1
1008984
-
The Step Probes (F733SP) model F73311B1030G150SP1 is meticulously designed for precision applications, offering reliability and exceptional performance within extreme temperature ranges from -45°C to +100°C. This step probe features a pitch of 4.00mm, making it ideal for nuanced measurements in electronic testing environments. With optimal continuous current handling up to 10A and a typical contact resistance of just 25 mOhm, it ensures minimal signal degradation, which is critical for accurate data collection. The probe's construction incorporates high-quality materials, including a beryllium copper plunger with a gold plating for enhanced conductivity, paired with a brass barrel also finished in gold plating. This setup not only provides durability but also enhances the overall effectiveness during use.
-
Product
Step Probes (F731SP) F73112B9008G110SP
1010720
-
The Step Probe F73112B9008G110SP (item number 1010720) is a Spring Contact Probe with a disc-shaped contact area for position and presence testing. On F73112B9008G110SP, electrical contact is established only at the intended penetration depth, making the Step Probe suitable for position and presence checks on connectors. F73112B9008G110SP is suited to contacts located in housings, recesses or difficult-to-access areas because its disc head makes contact only at a defined penetration depth. Key mechanical specifications include pitch 2.4 mm / 94 mil, step diameter 1.5 mm, pin diameter 0.65 mm, pin length 2.7 mm, spring force 110 cN, pointing accuracy ±0.08 mm. The electrical rating of F73112B9008G110SP combines 5 A continuous current with 25 mΩ typical contact resistance. The stepped contact geometry of F73112B9008G110SP makes electrical contact only in the intended installation position and can therefore help detect missing or incorrectly positioned terminals.
-
Product
Ultra High Accuracy Linear Motor Positioning
UPS-150
-
Physik Instrumente GmbH & Co. KG
The UPS-150 ultra-precision linear stagewas specifically designed for sub-surfacewafer inspection, fiber alignment, highprecision robotics and for all tasks wherea maximum positioning accuracy andreliability is absolutely mandatory.
-
Product
Remote-Controlled Dual Motor Remotely-Operated Boat
Q-Boat 1800RP
-
The Oceanscience Q-Boat® 1800RP is designed to offer a reliable, high specification remotely-controlled platform for the deployment of popular acoustic Doppler current profilers from any of the major instrument manufacturers. Made of high-impact UV resistant ABS, the Q-Boat 1800RP features twin high power outdrives to give a 5 m/s (16 fps) top speed with the security of two engines. The flexible propulsion system allows the Q-Boat 1800RP to be equally effective at very low velocities (30 cm/s), providing a total solution to river discharge measurement. Ready for GPS and Oceanscience Hydrolink radio modems, the Q-Boat 1800RP is available with an optional extended range remote control system that allows control at over 750m distance.
