Stepping Motor
A device that translates electrical pulses into precise mechanical movement. The output shaft may deliver rotary or linear motion. (www.seanet.com)
See Also: Electric Motor, Servomotor
-
Product
Manual Step Attenuator, DC to 18 GHz, 0 to 110 dB, 10 dB steps
8496B
Attenuator
The Keysight 8496B dc to 18 GHz manual step attenuator offers exceptional repeatability and reliability. Attenuation is provided in 10 dB steps from 0 to 110 dB. Precision gold-plated leaf springs ensure long life (over 5 million cycles) and very high attenuator repeatability (typically 0.01 dB). To improve measurement accuracy, NIST traceable data (SWR and attenuation) is available as Option UK6. Custom step attenuator/switch combinations are possible. The Keysight 11716A/B/C interconnect kits provide quick connection of Keysight 8494/5/6/7 1 dB and 10 dB step attenuators in series for greater dynamic range with 1 dB steps.
-
Product
Step Probes (F732SP) F73216B0027G300SP
1000998
-
The Step Probes (F732SP) model F73216B0027G300SP represents a robust solution for precision probing applications. Designed to function efficiently within a temperature range of -45°C to +100°C, this probe is suited for various environmental conditions. It features a pitch of 2.54 mm, making it ideal for applications requiring precise alignment and contact. With a maximum travel of 5 mm and a nominal travel of 4 mm, the F732SP ensures reliable performance while maintaining a pointing accuracy of ±0.08 mm. Additionally, the device supports a continuous current of 5 A, and its typical contact resistance is remarkably low at 20 mΩ, highlighting its efficiency in electrical applications.
-
Product
Motor Termination Units
-
Since the rise time of IGBTs are in the range of a few tens of nanoseconds (between 50ns-200ns), even short cables between PWM motor drives and motors cause voltage doubling at the motor terminals due to Travelling Wave Phenomenon as in transmission lines. The insulation of motor windings are prone to failure due to high voltage spikes if necessary precautions are not sufficiently taken. RC Type Output Filter Modules reduce these high voltage spikes to protect motors by connecting to stator terminals.
-
Product
Programmable Step Attenuator, DC to 40 GHz, 0 to 11 dB, 1 dB steps
84904L
Attenuator
The Keysight 84904L programmable step attenuator offers coaxial measurements to 40 GHz in a compact, rugged design. It offers repeatability of better than 0.03 dB, excellent life (greater than 5 million switching cycles per section) and an attenuation range of 0 to 11 dB in 1-dB steps. This latest design evolution sets new standards for size and performance. High attenuation accuracy and low SWR are achieved through the use of miniature thin-film attenuation cards composed of high-stability tantalum nitride film of saphire substrate. Insertion loss is outstanding, with with only 2.4 dB of loss at 40 GHz. The compact size of the unit, 35% smaller than the Keysight 8495/7 (26.5 GHz) family, allows for easy integration into instruments and ATE systems.
-
Product
Step Probes (F731SP) F73111B0001G300SP
1014639
-
The Step Probes (F731SP) F73111B0001G300SP are precision instruments designed for reliable and efficient operation in various environments, featuring an impressive temperature range from -45°C to +100°C. These probes are engineered with a pitch of 2.40 mm, allowing for intricate applications with a typical contact resistance of just 30 mOhm and a maximum continuous current rating of 5 A. Their robust mechanical specifications include a preload of 90 cN and a total travel capability of 4.40 mm, ensuring consistent performance across multiple cycles.
-
Product
Motor Vehicle Headlight Testers
-
Foshan Analytical Instrument Co, Ltd.
It can be used to promptly and accurately measure the luminous intensity and the illuminating position(or the optical axis deviation amount) of the high/low beam of vehicle headlight. With the lamp image alignment techique the single-machine high/low beam testing needs only 30-odd seconds.It is also used for the dual-lamp test at the testing station,the dual-machine test at the same time needs only 20-odd seconds.
-
Product
Motor Tester
-
FISHER TESTERS AUTOMATIC TEST EQUIPMENT
Dual Station Loaded Motor Tester including Automatic Shaft Engagement, Automatic Bar Code Scanners, Full Spectrum Vibration Analysis (8 bands) with Automatic Accelerometer Placement and Reject Printer.
-
Product
Step Probes (F732SP) F73211B0053G150SP
1010775
-
The Step Probes (F732SP) F73211B0053G150SP are precision instruments designed for accurate electrical connectivity in various applications. With a robust construction featuring a beryllium copper plunger plated in gold, these probes ensure minimal contact resistance, typically around 20 mOhm, which is vital for reliable electrical measurements. They function effectively across a temperature range of -45°C to +100°C, making them suitable for diverse environments. The sleek design with a projection height of 11.1 mm and a total length of 36.5 mm enhances usability and adaptability in intricate setups.
-
Product
Step Probes F73216B1019G150SP
1006575
-
The F73216B1019G150SP Step Probes, designated under the model number F732SP, are engineered for precision and reliability in various industrial applications. With a pitch of just 2.54 mm, these step probes are designed to maintain consistent contact under fluctuating temperatures ranging from -45°C to +100°C. They embody a host of mechanical advantages, including a preload force of 60 cN and a maximum travel of 5 mm, ensuring optimal performance in demanding environments.
-
Product
Step Probes (F732SP) F73211B1050G150SP
1008946
-
The Step Probes F73211B1050G150SP (Order code 1008946) are engineered for precision and reliability, making them an essential component in various electrical testing applications. Designed with a pitch of 2.54mm and capable of operating effectively in temperatures ranging from -45°C to +100°C, these probes bring outstanding versatility to your toolkit. With a continuous current rating of 5.00A and a typical contact resistance of just 20.00 mOhm, their electrical specifications ensure minimal resistance and optimal performance in critical testing conditions.
-
Product
Step Probes (F732SP) F73216B1049G150SP
1009031
-
The Step Probes (F732SP) F73216B1049G150SP are specifically designed to meet the demands of various applications, ensuring reliable performance in a wide range of environments. With a temperature tolerance ranging from -45°C to +100°C, these probes are equipped for use in both extreme heat and cold settings. Their solid construction and careful design make them ideal for precise measurements and connections in electronic testing and diagnostics. The original description stating it as "the right solution for almost every application" is well-supported by its enhanced design and technical capabilities.
-
Product
Step Probe F73316B1051G150SP
1009513
-
The F73316B1051G150SP Step Probe is a sophisticated tool designed for precision applications, seamlessly merging robust engineering with high-performance capabilities. Featuring a pitch of 4.00 mm (157 mil), this probe operates efficiently within a temperature range of -45°C to +100°C, ensuring reliability in diverse environmental conditions. Its design includes a preload of 50 cN and a spring force of 150 cN, translating to exceptional sensitivity and responsiveness, essential for accurate measurements and tests in critical environments.
-
Product
Step Probes (F731SP) F73111B1009G150SP
1010716
-
The Step Probes (F731SP) F73111B1009G150SP deliver exceptional precision and reliability, making them an essential tool for various applications. This product, identified by order code 1010716, features a design pitch of 2.40 mm, allowing for effective performance in a temperature range from -45°C to +100°C. The combination of high-quality beryllium copper with gold plating for the plunger ensures excellent conductive properties, while the brass barrel, also plated in gold, adds durability and resistance to corrosion.
-
Product
Step Probes (F732SP) F73211B1056G150SP
1009694
-
The Step Probes (F732SP) F73211B1056G150SP are precision-engineered components designed for high-performance applications in various electronic testing environments. With a robust design, these probes operate effectively across a temperature range of -45°C to +100°C, ensuring reliability in challenging conditions. Their exceptional pointing accuracy of ±0.08 mm and a substantial preload force of 60 cN make them ideal for delicate electronic measurements. Each probe is constructed using high-quality materials, featuring a plunger made of beryllium copper and plated with gold, which enhances conductivity and reduces contact resistance to just 20 mOhm. These probes come with optimized dimensions, including a total length of 35.50 mm and a projection height of 10.10 mm. The design ensures minimum space usage while maximizing functionality, with a nominal travel of 4 mm and a maximum travel of 5 mm. The Step Probes boast a powerful spring force of 150 cN, providing the necessary pressure for accurate readings and minimal wear over time. This combination of materials and design underscores the Step Probes’ efficiency and durability, making them a vital tool in both production testing and R&D applications.
-
Product
Step Probe F17516B0009G100SP
1139340
-
The F17516B0009G100SP Step Probe is engineered for precision and reliability in a diverse range of applications, crucial for electronics testing and assembly processes. Specifically designed under the F175SP and F176SP models, this probe incorporates cutting-edge technology to ensure optimal performance across various environments. It operates effectively within a temperature range of -45°C to +100°C, making it suitable for both extreme cold and high-heat conditions.
-
Product
Servo Motor ,Precision Linear Stages
PSAXXX-11AS-X
-
Model:PSAXXX-11AS-X Servo Motor ,Precision Linear Stages PSAXXX-11AS-X adopt panasonic 100W or 200W AC servo motor and high level coupler,achieve high resolution,high speed,low vibrate;material is alluminum alloy by special craft; Characteristic ◆ground ball screw ,achieve high postion accuracy◆import guide ensure straightness and parallel inconjunction with our special craft◆strict assemble craft and test method, ensure high performance◆servo-motor and limited swithes design, convenient for choosing controller◆limited switches ensure safety◆different size and travels,make products abount◆hand-wheel achieve hand adjustment
-
Product
Step Probe (F732SP) F73211B0042G100SP
1139338
-
The Step Probes (F732SP) model F73211B0042G100SP offers meticulous precision and robust functionality, making it an essential component for specialized electronic testing and assembly applications. With a pitch of 2.54 mm (100 mils), these probes are engineered to operate effectively within extreme temperature variations ranging from -45°C to +100°C. This product seamlessly integrates into tight layouts and is ideal for improved contact reliability across diverse environments. Crafted from high-quality materials, including a beryllium copper plunger plated in gold, the Step Probes ensure excellent electrical characteristics while maintaining a durable design for longevity and performance.
-
Product
Step Probes (F733SP) F73316B1044G150SP1
1009527
-
The Step Probes (F733SP) model F73316B1044G150SP1 is designed for precise and reliable electrical testing within a temperature range of -45°C to +100°C. With a compact pitch of 4.00 mm (157 mil), this probe is specifically optimized for applications demanding meticulous contact quality. Engineered from durable materials, including a beryllium copper plunger and a brass barrel plated with gold, this probe ensures minimal wear and exceptional performance. The poduct's continuous current capacity of 10.00 A and a typical contact resistance of just 25.00 mΩ make it suitable for high-performance environments. Additionally, the proven reliability is enhanced by its preload of 50.00 cN and spring force of 150.00 cN, ensuring consistent operation across a broad range of uses.
-
Product
Wire Crimp Pull Tester (Motorized)
WT3-201M
-
The WT3-201M motorized wire crimp pull tester is designed to measure pull-off forces of up to 200 lbF [1 kN] for wire and tube terminations. The tester conforms to numerous UL, ISO, ASTM, SAE, MIL, and other requirements for destructive testing. Non-destructive testing is also possible, such as pulling to a load or maintaining a load for a specified period of time, as per the requirements of UL 486A/B. Programmable pass/fail limits with red and green indicators and audio alerts help identify non-conforming samples.
-
Product
Step Probes (F733SP) F73316B1036G300SP1
1009015
-
The F733 Probes, specifically the model F73316B1036G300SP1 with order code 1009015, represent a high-quality solution for precision probing applications. Designed with a pitch of 4.00 mm and capable of operating between -45°C and +100°C, these step probes are engineered to meet the demanding requirements of various testing environments while ensuring reliable performance. With critical specifications including a preload of 60 cN and a spring force of 300 cN, they guarantee optimal force application for accurate measurement results.
-
Product
Step Probe F73211B1045G150SP
1008944
-
Introducing the F73211B1045G150SP Step Probe, designed to meet stringent requirements for precision and reliability in various applications. This robust probe boasts a pitch of 2.54 mm and operates efficiently within a temperature range from -45°C to +100°C, making it ideal for complex environments. With a continuous current capability of 5.00 A and a typical contact resistance of just 20.00 mOhm, the F73211B1045G150SP ensures optimal performance in electrical connectivity, enabling accurate signal transmission.
-
Product
Step Probes (F731SP) F73111B0031G100SP
1032524
-
The Step Probes (F731SP) F73111B0031G100SP offers exceptional precision and reliability in various applications. With its design based on stringent quality standards, this product features a pitch of 2.40 mm (94 mil) and operates efficiently across a wide temperature range of -45°C to +100°C. The additional definition of SP indicates its specialized purpose for probing in tight spaces, ensuring optimal performance for intricate electronic testing and assembly tasks.
-
Product
Motor Driver ICs
-
The ST product portfolio offers a wide range of motor control ICs, well-suited for the most demanding automotive environments, covering the requirements of brushed DC motors, stepper motors and brushless DC motors, over an extensive range of voltage and current ratings. Efficiency and accuracy of our motor drivers are guaranteed by a unique combination of low-loss PowerMOS output stages and advanced control circuitry. Robustness and reliability are provided by the integration of a comprehensive set of protection and diagnostic features.
-
Product
Programmable Step Attenuator, DC to 40 GHz, 0 to 70 dB, 10 dB Steps
84907L
Attenuator
The Keysight 84907L programmable step attenuator offers coaxial measurements to 40 GHz in a compact, rugged design. It offers repeatability of better than 0.03 dB, excellent life greater than 5 million switching cycles per section) and an attenuation range of 0 to 70 dB in 10-dB steps. This latest design evolution sets new standards for size and performance. High attenuation accuracy and low SWR are achieved through the use of miniature thin-film attenuation cards composed of high-stability tantalum nitride film of saphire substrate. Insertion loss is outstanding, with with only 2,4 dB of loss at 40 GHz. The compact size of the unit, 35% smaller than the Keysight 8495/7 (26.5 GHz) family, allows for easy integration into instruments and ATE systems.
-
Product
Step Probes (F731SP) F73111B0033G100SP
F73111B0033G100SP
-
The Step Probes (F731SP) F73111B0033G100SP are critical components designed for precision applications. They feature a pitch of 2.40 mm (94 mil) and can operate in temperatures ranging from -45°C to 100°C. This makes them suitable for a wide range of environments, ensuring reliable performance under extreme conditions. The probes are engineered with an emphasis on durability and accuracy, which are essential for today's demanding technological landscapes.
-
Product
Step Probes (F732SP) F73216B1029G150SP
1004115
-
The Step Probes (F732SP) F73216B1029G150SP is a highly specialized measurement tool designed to perform in extreme conditions ranging from -45°C to +100°C. With the precision of a 2.54 mm pitch, this probe ensures accurate contact, ideal for a variety of electrical and mechanical applications. Made with high-quality materials such as beryllium copper for the plunger and brass for the barrel, both plated in gold, the F73216B1029G150SP provides reliable performance and minimal contact resistance at just 20 mOhm. Designed for optimal spring force, this tool operates efficiently with a preload of 60 cN and a maximum travel of 5 mm, ensuring quick and precise measurements.
-
Product
Stepper Motor Controller for VMEbus
VME321
-
The VME321 Intelligent Stepper Motor Controller with Amplifiers is an ideal solution for all applications where stepper motors must be controlled with a maximum of flexibility and a minimum of overhead. The local processor handles all high-level commands to provide maximum control for both straightforward as very complex applications.This VMEbus board has a 6U form and is also available as 3U VMEbus board.
-
Product
Manual Step Attenuator, DC to 4 GHz, 0 to 110 dB, 10 dB steps
8496A
Attenuator
The Keysight 8496A dc to 4 GHz manual step attenuator offers exceptional repeatability and reliability. Attenuation is provided in 10 dB steps from 0 to 110 dB. Precision gold-plated leaf springs ensure long life (over 5 million cycles) and very high attenuator repeatability (typically 0.01 dB). To improve measurement accuracy, NIST traceable data (SWR and attenuation) is available as Option UK6. Custom step attenuator/switch combinations are possible. The Keysight 11716A/B/C interconnect kits provide quick connection of Keysight 8494/5/6/7 1 dB and 10 dB step attenuators in series for greater dynamic range with 1 dB steps.
-
Product
Phase Sequence Motor Rotation Meter
PSMR1
-
UEi Test & Measurement Instruments
Increase safety and speed for motor diagnosis. The PSMR1 combines two meters with three functions. It includes a 3-phase sequence indicator with a motor rotation tester.
-
Product
Manual Step Attenuator, DC to 18 GHz; 0 to 70 dB; 10 dB steps
8495B
Attenuator
The Keysight 8495B dc to 18 GHz manual step attenuator offers exceptional repeatability and reliability. Attenuation is provided in 10 dB steps from 0 to 70 dB. Precision gold-plated leaf springs ensure long life (over 5 million cycles) and very high attenuator repeatability (typically 0.01 dB). To improve measurement accuracy, NIST traceable data (SWR and attenuation) is available as Option UK6. Custom step attenuator/switch combinations are possible. The Keysight 11716A/B/C interconnect kits provide quick connection of Keysight 8494/5/6/7 1 dB and 10 dB step attenuators in series for greater dynamic range with 1 dB steps.
