Product

Grinding Tool Dynamometer

UIG-17

-

Unitech Scales And Measurements Pvt. Ltd

UIG-17 - Unitech Scales And Measurements Pvt. Ltd

Unitech offers tool dynamometers to measure cutting forces on various machines like lathe, drill, milling machines. All three direction forces are measured simultaneously and displayed. Tool dynamometers are useful to study, analyse the optimum feed, speed and depth of cut on different materials. The dynamometers are also available in various capacities as per customer requirement.

Product

Battery Chargers

-

FERVE s.a.

FERVE s.a.

Is a device used to put energy into a secondary cell or rechargeable battery by forcing an electric current through it.

Product

Towing Dynamometer

RS-40K

-

Taylor Dynamometer, Inc.

RS-40K - Taylor Dynamometer, Inc.

RS-40K towing dynamometer is designed for testing today’s DOT Vehicles (Classes 5 and 6) which include trucks and buses. The RS-40K is built with a heavy-duty steel frame, industrial axle and rides on an air ride suspension. The RS-40K is designed to maintain 40,000 Newtons of constant drawbar force and the ability to simulate an uphill slope of 25%. The dyno uses eddy current absorbers with special high temperature coils. The power is provided by an industrial generator. Testing is unlimited at lowspeeds.

Product

Auto Tensile Tester

ATT-01A

-

Jinan Leading Instruments Co., Ltd.

ATT-01A - Jinan Leading Instruments Co., Ltd.

ATT-01A Auto Tensile Tester is applicable in the test of physical mechanical properties of plastic films, laminated materials, adhesives, adhesive tapes, adhesive bandage (plaster), release paper, protective film, leather, rubber and paper fiber, etc. It can perform the test items of tensile, peeling, deformation, tearing, heat seal, adhesive, open force, etc.

Product

TorqueMate® Torque Analyzer

PTT-Series

-

Mountz Inc.

PTT-Series - Mountz Inc.

The PTT torque meter makes quality documentation faster and easier. As an advanced torque controlling, monitoring and documentation solution, the torque analyzer enables operators and engineers to ensure product quality, safety and reliability promptly in a variety of manufacturing environments. The portable torque meters are designed for measuring torque, torque calibration, joint testing, auditing or force and load measurement. The failure of a three-cent fastener that isn’t properly tightened can lead to catastrophic or latent failures. Using a quality torque tester makes a safer world through accuracy and precision.

Product

Measurement System

CmForce

-

CeTaQ GmbH

CmForce - CeTaQ GmbH

CeTaQ has developed a measuring system for the determination of placement force under real process conditions. This makes it possible to identify weaknesses at an early stage and to avoid component damage during the assembly process. With only one measurement; force and energy input of each nozzle are now known.

Product

Running Line Tensiometer

TIMH

-

Straightpoint UK Ltd.

TIMH - Straightpoint UK Ltd.

The TIMH - running line tension meter range are built with dockside, marine, offshore, towage and salvage applications in mind. It is particularly useful where there is no anchor or dead end on the line to rig a Straightpoint Radiolink or Loadlink digital dynamometer to measure tension force.

Product

Structural & Stress Analysis

-

Dayton T. Brown, Inc.

Dayton T. Brown, Inc.

Structural analysis is critical because it can determine cause and predict failure – evaluating whether or not a specific structural design will be able to withstand the external and internal stresses and forces expected for the design.

Product

Pulse Heat Unit (Hot Bar Bonder)

-

Nippon Avionics Co.,Ltd.

Nippon Avionics Co.,Ltd.

*This method is most suitable for reliable soldering and thermo-compression because heating and cooling are done applying the pressure force*Good repeatability of heating temperature and time requires no skilled workers*Partial heating in short time allows to reduce thermal damages*For implement of Pb free

Product

Field-Flow Fractionation

FFF

-

Wyatt Technology

FFF - Wyatt Technology

Is a separation technique where a field is applied to a fluid suspension or solution pumped through a long and narrow channel, perpendicular to the direction of flow, to cause separation of the particles present in the fluid, depending on their differing "mobilities" under the force exerted by the field.

Product

Nanolattice Standards for Analytical Instruments

-

VLSI Standards, Inc.

VLSI Standards, Inc.

The NanoLattice™ (NLSM) 100 nm pitch standard utilizes gratings with near perfect periodicity to calibrate magnification and scan linearity of Electron and Atomic Force Microscopes (AFM). Make the grade, with the highest quality pitch standard of its kind available.

Product

Extender

3690-17

-

VECTOR Electronics and Technology, Inc.

3690-17 - VECTOR Electronics and Technology, Inc.

Contact fingers at the other end of extender card are gold plated provides low insertion force and positive contact with printed circuit boards. Receptacles have double row phosphor bronze contacts with high quality, long life mounted on top of the extender.

Product

Crease and Board Stiffness Tester

CBT1

-

Rhopoint Instruments

CBT1 - Rhopoint Instruments

The instrument measures crease folding force at 90°, board stiffness at 15° and requires no external software for operation. It automatically calculates the crease to board stiffness ratio for instant indication as to whether the material will run correctly on a high speed packaging machine.

Product

Hybrid Single Site Test Handler

3110

-

Chroma ATE Inc.

3110 - Chroma ATE Inc.

Chroma Hybrid Single Site Test Handler 3110 is a full range ATC (Active Thermal Control) test handler capable of handling device bodies up to 120x120mm with 450kg force load.

Product

Level Measurement

-

Kobold Instruments, Inc.

Kobold Instruments, Inc.

Displacer level gauge for liquids from KOBOLD Instruments operates on the Archimedes principle. The level gauge's displacer tube rests inside the tank and is connected to the measuring unit via a spring. As liquid level increases, the buoyant forces of the liquid act on the displacer tube to reduce spring tension, allowing the spring to expand. The spring connects to a magnetic actuator, and the motion of the actuator is picked up by a magnetically linked indicator to yield the tank level measurement. The displacer level gauge is calibrated at the factory for the user's specified liquid density. Special designs with higher pressure or temperature ratings, as well as those made of exotic materials, are always available on request.

Product

Hot Temperature Hardness Tester

1200C

-

Rtec Instruments

1200C - Rtec Instruments

Rtec high temperature hardness tester is used to do high temperature materials testing up to 1200C. To prevent oxidation of tip and the samples the high temperature indenter comes with sealed chamber with inert gas. High resolution programmable down force control and XY stage allows to do multiple indents on same or multiple samples with ease.

Product

Cellular Network Analysis Software

NESTOR

-

Rohde & Schwarz GmbH & Co. KG

NESTOR - Rohde & Schwarz GmbH & Co. KG

R&S®NESTOR is a Windows 10 based platform for analyzing cellular networks via the air interface. It is deployed by law enforcement agencies, intelligence services, armed forces and regulatory authorities. R&S®NESTOR is used together with R&S®TSMX mobile network scanners and QualiPoc smartphones, which offer the most advanced technology worldwide. The software supports all relevant applications that public authorities and security organizations need to gather information about cellular networks. R&S®NESTOR is used in vehicles, trains, aircraft, drones, on ships and on foot.

Product

Drill Tool Dynamometer

-

Unitech Scales And Measurements Pvt. Ltd

Unitech Scales And Measurements Pvt. Ltd

Unitech offers tool dynamometers to measure cutting forces on various machines like lathe, drill, milling machines. All three direction forces are measured simultaneously and displayed. Tool dynamometers are useful to study, analyse the optimum feed, speed and depth of cut on different materials. The dynamometers are also available in various capacities as per customer requirement.

Product

Brinell Hardness Tester

-

Beijing TIME High Technology Ltd.

Beijing TIME High Technology Ltd.

Measures a material's resistance to indentation by pressing a hardened steel or carbide ball into its surface with a specific force.

Product

Scott Type Crease-Flex Abrasion Tester

TF119

-

TESTEX Testing Equipment Systems Ltd.

TF119 - TESTEX Testing Equipment Systems Ltd.

Scott Type Crease-Flex Abrasion Tester, to determine the crease-Flex abrasion resistance of leather, rubber cloth etc. The force loaded on specimen, distance between grips and the two-way distance can be adjustable. And the force loaded on specimen is of spring type.

Product

Probecard testers

MANAGER

-

Beijert Engineering BV

MANAGER - Beijert Engineering BV

Today more complex probe cards are being used. More pins,higher density and larger array requires a new approach inprobe card analysis. With the soaring cost of new generationprobe cards, repair of defective cards becomes an necessity.BE Precision Technology offers all capabilities with the newMANAGER V. Future proof, up to 450 mm full wafer contactprobe cards can be analyzed with up to 88.000 test channels.High-end materials are used to stand extra tough requirements—such as 500 mm diameter diamante viewing window,ultra stiff carbon flip-table, high power Z–stage to generate 600Kg of contact force

Product

12 Pulse Diode Bridge Rectifiers Inside Fiberglass Plenums, P/N 5872C4-2

-

Carl E. Holmes Company

Carl E. Holmes Company

- 12 Pulse Diode Bridge Rectifier, P/N 5872C4-2- Each diode is rated for 60 Amps, 1800 Volts peak- Dimensions: 50″L x 40″W x 20″H approximately- Four 10″ fans are used for coolingFour 10″ fans will force cool from the bottom of the Plenum. 12 diode assemblies (each diode consists of nine diodes in series are integrated together inside the Plenum). The output is rated for 3000 VDC, 80 Amps.

Product

Board-to-FPC Connector for 5G Millimeter-Wave Antenna Modules

-

Panasonic Industrial Devices Sales Company of America

Panasonic Industrial Devices Sales Company of America

Panasonic's Board-To-FPC Connector for 5G Millimeter-Wave Antenna Modules offer good SI/EMI/EMS characteristics for high-frequency applications and features our industry-leading Tough Contact construction that achieves high contact reliability and retention force. Tough against shock impact by misalignment, the fully-shielded structure in both socket and header significantly improves EMI characteristics necessary for RF applications such as 5G.