Product

Multisample Rotation Type of Magnetization Measurement System

REM

-

TOEI INDUSTRY CO, LTD.

REM - TOEI INDUSTRY CO, LTD.

This equipment is a new system of magnetization measurement equipment to arrange a large number of samples on circumference of disk, rotate the disk in magnetic field, detect derivative electromotive force in　order generated by moving sample with detection coil, evaluate as magnetized amount after amplifying electromotive force and calculating it and measure continuously magnetization curve of a large number of samples with once magnetic field sweep.

Product

ThermalAir Series Temperature Forcing System

ThermalAir TA-1000B Rack Mount Test System

-

MPI Thermal Test Systems

ThermalAir TA-1000B Rack Mount Test System - MPI Thermal Test Systems

The ThermalAir TA-1000B high capacity thermal air stream system is used for temperature testing, fast thermal cycling, and device  temperature characterization of components, hybrids, modules, PCBs, and other electronic and non-electronic assemblies at precise temperature from -25°C to +200°C.

Product

Force Logger Sensor

NUL-211

-

Neulog

NUL-211 - Neulog

This sensor can measure the mass to weightrelationship and study how different pulleysystems affect the effort needed to lift weights.It can also be used to measure push/pull forcesand impacts. There is a hook at the bottom of the force sensor that can be connected to various pulling loads.

Product

Stand-Alone Test Fixture

MA 2012/D/H/VPC-G12x-18

-

INGUN Prüfmittelbau GmbH

MA 2012/D/H/VPC-G12x-18 - INGUN Prüfmittelbau GmbH

Parallel contact stroke: 15 mmContact force max.: 2000 NInterface block required: NoInterface signals max.: 1190Component on PCB: 58 mmPressure frame unit-opening angle: 75Installation height test probe top: 16,0 mmInstallation height test probe bottom: 10,5 mmInstallation height dual-stage test probe bottom: 16,0 mmweight: 17,50 kg

Product

CoreAFM - the best value research AFM

CoreAFM

-

Nanosurf

CoreAFM - Nanosurf

The fusion of a modern flexure-guided scanner, XYZ sample stage, camera, active vibration isolation table, and acoustic shielding in a single all-in-one unit results in a complete AFM system with an unparalleled compact footprint. The system comes with a fully digital 24-bit controller developed specifically for the CoreAFM scanhead. All the essential functions of modern AFM are integral components of the CoreAFM system; all you need to do to take the CoreAFM into operation is connect the controller, and plug in power and USB.State of the art electronics with 24-bit ADC and DAC ensure high-resolution XYZ driving of the 100×100×12 µm scanner and allow for low-noise force detection limited only by the cantilever. Thirty-two standard and optional modes with fully compatible add-ons make the CoreAFM the tool of choice for applications ranging from materials research to life science and electrochemistry. Starting from the basic CoreAFM system, its functionality can be seamlessly extended

Product

50/75 Ohm Micro Coax Contacts

-

Virginia Panel Corporation

Virginia Panel Corporation

Rated to 3 GHz using RG 316 or RG 178 Max of 10.5 GHz using RG 316 Double Shield.Rated to 10,000 cycles.50 and 75 Ohm impedance.Mating force of 1.5 lb.High density I/O Crimp contact designed for RG 316, RG 178, and RG 179 wire.

Product

Deadweight Testers & Gauges

-

Chandler Engineering

Chandler Engineering

The most accurate instrument available for the measurement of pressure above a few psig is the Hydraulic Deadweight Gauge. This type of gauge operates on the principle of balancing a known mass against the force exerted by an unknown pressure on a piston of known area.

Product

Wire Crimp Pull Tester (Manual)

WT3-201

-

Mark-10 Corp.

WT3-201 - Mark-10 Corp.

The WT3-201 wire crimp pull tester is designed to measure the pull-off force of crimped wire and tube terminations. An ergonomic lever allows for easy application of up to 200 lbF (1,000 N) of crimp pull force. Adjustable wire terminal grip contains multiple slots for wire diameters up to AWG 3 (0.25 in [6.3 mm]). The tester accommodates most insulation types. Samples can be sent to Mark-10 for evaluation prior to purchase.

Product

Hardware/Software for Increased Production

VibLink & NavLink

-

Seismic Source Co.

VibLink & NavLink - Seismic Source Co.

The VibLink system - Each vibrator, plus the central recorder, is equipped with a VibLink module. The VibLink module uses advanced TDMA techniques to multiplex seven vibrators and the doghouse on one radio channel. And does this all in one second windows. With additional Vibrators, additional seconds are added. The Universal Encoder 3 uses its time slot to send out status updates and request PSS/PFS data. Each Force 3 controller uses its time slot to send out its location, status, and QC Information.

Product

Border Surveillance equipment

-

Shoghi Communications Ltd.

Shoghi Communications Ltd.

Shoghi offers its new portfolio of products for its discerning customers all over the world in the field of border surveillance. Ensuring the security and sanctity of its borders is a prime task for any nation for the security of the nation. Prevention of incursion by hostile elements, militants, prevention of activities like illegal human trafficking, smuggling of narcotics, arms and ammunition are tasks performed by homeland or border security organizations. The integrated surveillance solution also can be effectively used by reconnaissance and observation units of mobile formations of the defence forces for their operational tasks.Border Surveillance products:-1.Electro-optic Cameras2.Portable Ground Surveillance Radar3.Mobile ELINT System

Product

Electrodynamic Shaker Systems

-

MB Dynamics Inc

MB Dynamics Inc

Electrodynamic shaker systems and amplifiers from MB Dynamics help to support a wide range of general-purpose vibration test requirements. The electrodynamic shaker systems are offered in a variety of force ranges, from 100N (25 lbf) to 22kN (5,000 lbf). The innovative design of MB Dynamics PM-Series electrodynamic shakers incorporates permanent magnet technology and the voice coil principle to create vibration. These heavy-duty electrodynamic shakers feature a robust design for maximum reliability, with end-users reporting a useful service life of 10, 25 or even 40 years! The shakers come in five unique sizes, with peak sine force ratings of 100 N, 200 N, 500 N, 1000 N and 2000 N; or, 25 lbf, 50 lbf, 100 lbf, 250 lbf and 500 lbf. The MB Dynamics C40HP electrodynamic shaker outputs 22 kN or 5,000 lbf peak. The C40HP is a part of the legacy C-Series of shakers, which have served as the foundation for today’s modern electrodynamic vibration test equipment industry.

Product

Rugged, Long Gauge Length Extensometers

Model 3543

-

Jinan Testing Equipment IE Corporation

Model 3543 - Jinan Testing Equipment IE Corporation

With over 15 years of proven reliability in the world’s most demanding testing environments, the Model 3543 extensometer is designed to survive in those applications where standard axial extensometers would not. Designed by Epsilon, the Model 3543 was created to survive specimen failure by separating into two halves, thus preventing permanent damage to the module body. During operation, the upper half of the extensometer pulls out of the main body. Tapered measuring beams activate strain gaged flexures within the unit. This unique design allows long measuring ranges, yet retains compatibility with electronics for strain gaged transducers. These models offer high accuracy and are light weight but rugged, with low operating force. They are tension only units.The units have hardened tool steel knife edges. Standard quick attach wires provided with the extensometer work on flat specimens up to 12 x 31 mm (0.5 x 1.25 inch) and on rounds up to 25 mm (1 inch) diameter. Optional quick attach kit wire forms are available for use on larger samples. See Model 3542L for long gauge lengths with smaller measuring ranges.The Model 3543 extensometers are strain gaged devices, making them compatible with any electronics designed for strain gaged transducers. Most often they are connected to a test machine controller. The signal conditioning electronics for the extensometer is typically included with the test machine controller or may often be added. In this case the extensometer is shipped with the proper connector and wiring to plug directly into the electronics. For systems lacking the required electronics, Epsilon can provide a variety of solutions, allowing the extensometer output to be connected to data acquisition boards, chart recorders or other equipment.

Product

Multi Axis Load Cells

-

HITEC Sensor Solutions Inc.

HITEC Sensor Solutions Inc.

Multi-Axis Sensors are designed to measure a multiple of forces and moments simultaneously with a single load cell sensor. These sensors provide multiple bridges that precisely measure the applied force from one direction with little or no cross-talk from the force or moment.

Product

Impact Testing

-

Educated Design & Development, Inc.

Educated Design & Development, Inc.

1250 g body includes release mechanism and striking element guide.250 g striking element comes with cocking knob and hammer head, polyamide face, is hemispherical with a radius of 10 mm, has a hardness of HR85-100.60 g release cone with a 10N release force.Single Impact Force models range from a 0.2 J Hammer to a 2.0 J Hammer.Custom padded carrying case included.

Product

Non-standard Constant Acceleration Tester

KRD32 series

-

CME Technology Co. Ltd.

KRD32 series - CME Technology Co. Ltd.

KRD32 series non-standard constant acceleration testing machine is test equipment for military products to simulate dynamic centrifugal motion, dual environmental force centrifugal motion and central high-speed rotating motion.

Product

Static Load Cells (500 N to 600 kN)

2580 Series

-

Instron

2580 Series - Instron

The Instron 2580 Series static load cells are high-precision force transducers optimized for use with 5900 and 6800 Series universal testing systems, capable of measuring loads across a wide range (up to ±600 kN) with accuracy to 0.5 % of reading and sensitivity down to 1/1000th of full scale. Temperature-compensated and calibrated on equipment traceable to international standards, they have automatic recognition with an electronic serial number and support electronic calibration, while offering overload protection (up to 150 % without damage, 300 % without mechanical failure). The 2580’s design delivers high stiffness and reliable alignment under load—making it a robust choice for tension, compression, cyclic, and reverse stress testing in materials and components.

Product

Cord Flexing Test Set Up For Hair Dryer and Hair Straightner

-

SCR ELEKTRONIKS PVT. LTD.

SCR ELEKTRONIKS PVT. LTD.

SCR Elektroniks make CORD FLEXING TEST SET UP FOR HAIR DRYER & HAIR STRAIGHTENER is used to test the Electrical accessories / appliances for their mechanical strength. Operate appliances Hair dryer or Hair straightener at rate voltage. Position appliances swivel with connection with major axis horizontal ,supply cord hanging vertically with 1N pull force. Rotate the appliance around its major axis, Clockwise & Anti-clockwise. Frequency is 10 turns in one minute.

Product

High Load Shear Strength Tester

HLST1000

-

Rhesca Co., Ltd.

HLST1000 - Rhesca Co., Ltd.

This tester measures the shear force required to analyze the bonding strength of various bonding materials. It is possible to measure shear force up to 5000N for the purpose of bonding strength evaluation over a large area. An optional heating unit enables evaluation while the sample is heated.

Product

Audio Testing

-

Quest Engineering Solutions

Quest Engineering Solutions

Sound Power testing is required in many international standards. Quest also offers a variety of additional acoustic tests and the design experience to help you develop quieter products for your customers. Our chamber is able to cancel out all outside forces as well with its free floating floor boards.