Conductance
See Also: Battery Conductance Testers
-
Product
4-Probe Resistivity and Resistance Tester
HS-MPRT-5
-
t used for measuring resistivity of silicon rods and wafers, and sheet resistance of diffused layers, epitaxial layers, LTO conductive films and conductive rubbers, etc.
-
Product
Sputter Coater & Freeze Fracture Solutions
-
To obtain high-quality images of samples with scanning (SEM) or transmission electron microscopy (TEM), your samples need to be conductive to avoid charging. If a sample does not have a high enough conductivity, then you can quickly cover it with a conductive layer using the method of sputter coating. Also, a carbon or e-beam evaporator coating can be used. Such coatings protect the sample, allow enhancing of the EM image contrast, or can act as a TEM-grid support film for small scale samples.
-
Product
Push Back Probes (VF4) VF406B240G10
1002325
-
The Push Back Probes (VF4) VF406B240G10, with order code 1002325, are engineered for precision and reliability in a variety of applications. With a basic contact probe design, these probes boast exceptional characteristics such as a pitch of 4.00 mm (157 mil) and an operational temperature range from -45°C to +100°C. The robust construction includes a plunger made from beryllium copper with gold plating, combined with a brass barrel also plated in gold, ensuring high conductivity and resistance to corrosion.
-
Product
Meter with 3m Cable 4-Cell Electrode
CyberScan COND 600
-
Measure from pure water to seawater with one meter! COND600 features a broad conductivity range with Auto-ranging Capabilities for more convenience.
-
Product
Fittings
-
Specialized, removable connectors and housings used to securely mount sensors (for pH, ORP, conductivity, or oxygen) into pipes, tanks, and reactors.
-
Product
Comb Generator
CG 50/500
-
The main application of Conducted Comb Generator is to quickly verify conducted emissions test setups. And the most important application is trouble conducted measurements using an ISN.reference signal source Noise Generators Signal Generators
-
Product
Dopant
-
In semiconductor manufacturing, electrical performance starts with atomic-level control. Dopant technologies make that possible by introducing carefully measured doping constituents that help devices conduct, switch and perform reliably. For precise control of fluxes for Molecular Beam Epitaxy (MBE) dopant constituents, or for gases that do not require thermal cracking, Veeco’s Dopant products are ideal.
-
Product
Synthesisers
-
The Laplace Synthesisers cover both conducted and radiated RF immunity test requirements. The frequency coverage extends from 100KHz to 500MHz for conducted tests (RFIC-4-6) and 30MHz – 6GHz for radiated tests (RF3000/RF6000). They are all controlled from the users PC via a USB link, and powerful Windows software is included to enable the user to control all the parameters of the test, to monitor the test in progress, and to view the results.
-
Product
Oxygen / Nitrogen Analyzer
ELEMENTRAC ON‑p 2
-
The new ELEMENTRAC ON-p 2 is a powerful and robust elemental analyzer for measurement of oxygen and nitrogen concentrations in inorganic materials like steel, iron, copper or ceramics. The highly sensitive NDIR and thermal conductivity detectors reliably detect element concentrations from low ppm content to high percentages.
-
Product
Step Probes (F732SP) F73211B0024G300SP
1022911
-
The Step Probes (F732SP) F73211B0024G300SP is a highly precise electromechanical device designed for various applications where reliable connectivity is crucial. This model features a unique pitch of 2.54 mm, making it ideal for intricate electronic components. The operational temperature range of -45°C to +100°C ensures performance stability under extreme conditions, catering to diverse industrial needs. Constructed with high-quality materials, the plunger is made from beryllium copper and plated with gold, enhancing its conductivity and durability. The brass barrel similarly features a gold plating, ensuring a robust performance over time.
-
Product
EMI Test Receiver
KH3938B
-
Beijing KeHuan Century EMC Technology Co,.LTD
Is a fully automatic radio disturbance test receiver and is the main tool for EMI testing. KH3938B receivers frequency range 9kHz-1GHz, in accordance with: 2010 and GB / T6113.101-2016 development standards designed to meet the requirements of the standard-compatible, can be used to power emission test, Sao conduction disturbance voltage test, radiated disturbance within 1G test. The receiver has the advantages of fast test speed , strong maneuverability, stable performance, and convenient test data processing.
-
Product
Rotators And Pylons
-
NSI-MI's Radar Cross Section (RCS) target positioning solutions are high-performance systems designed for conducting accurate and precise monostatic scattering measurements. These systems, consisting of a low-observable support structure (pylon) and azimuth-over-elevation rotators, offer exceptional edge sharpness and surface accuracy. Built with compact high-strength structures, high-power mechanical drives, low-backlash gearing, and high-accuracy absolute encoders, all models of the RCS target positioning system deliver outstanding performance. Using advanced features and customizable options, NSI-MI target positioning solutions provide the reliability and precision required for RCS measurements in a wide range of applications.
-
Product
Floor Resistance Test Kit
PMK-152
-
The PMK-152 Floor Resistance Test Kit contains the instruments you need to take resistance measurements.The PMK-152 includes Prostat's PRS-812 Resistance Meter with 5 pound conductive rubber electrodes. You can take measurements at 10 and 100 volts with accuracy within ±5%.
-
Product
Basic Threaded Probe F73118B075G150
1011455
-
The Basic Threaded Probes (F731) F73118B075G150 is meticulously crafted for precision and reliability in various applications. With a design focused on optimal contact performance, this probe features a pitch of 2.40 mm and operates efficiently within a temperature range of -45°C to +100°C, making it suitable for challenging environments. The probe's robust construction incorporates high-quality materials such as beryllium copper for the plunger and brass for the barrel, both plated with gold, ensuring excellent conductivity and durability.
-
Product
Solidtron Thyristors
-
The Solidtron family of products employ our advanced high voltage thyristors having incredibly fast and predictable turn-on performance as well as remarkably low conduction loss. These key attributes make Solidtron products ideally suited for use in a wide variety of pulsed-power applications where precise turn-on characteristics, reliability and longevity give them distinct advantages in certain applications over tube and spark-gap technology.
-
Product
3U VPX RL Thermal Load Simulation Module
-
The 3U power test module is an ideal solution for evaluating heat dissipation in a rugged conduction cooled VPX cage or chassis. This card is a thermal load in the chassis to evaluate the heat dissipation. The chassis can be monitored with temp sensing probes and or FLIR imaging. Different wattages are selected by setting dip switches. The +5 and 3.3V loads are on the top of the module. The +12V and -12V loads are on the bottom side of the module.
-
Product
2U Data Processing Computer
CP42102
-
LinkedHope Intelligent Technologies Co.,Ltd.
CP42102 is a 2U ruggedized data processing computer compliant with PICMG CompactPCI® specifications. With ruggedized conduction cooling structure and CompactPCI® module design, CP42102 has excellent performance on heat dispassion and anti-vibration, and can save costs on maintenance in the long run.CP42102 can meet the demands for big data processing, computing and storage, as CP42102 is equipped with a 3rd Gen embedded Core™ i7 high-performance processor with up to 16GB memory and 1TB storage. On CP42102, interfaces like Ethernet, USB, serial ports, VGA, etc. are routed to the rear through aviation plugs; inside the chassis, CPU slot and 2 service slots are connected by 1x LVTTL; outside the chassis, 2 N50K RF interfaces are added for external interconnection.
-
Product
Ground Earth Resistance Tester
2678X
-
Shenzhen Chuangxin Instruments Co., Ltd.
Ground Earth Resistance Tester verifies the integrity (continuity) of the protective bonding of the equipment (Class I equipment) designed to secure safety through the basic insulation and protective earthing. It is also called earth (ground) bonding test. If the continuity of the protective bonding is confirmed, we can conclude that the equipment has the requirements for preventing electric shock even if the insulation between the primary circuit and the accessible conductive section fails and a fault current flows through the distribution system.
-
Product
Push Back Probes (VF3) VF317B230G15
1005901
-
The Push Back Probes (VF3) VF317B230G15, order code 1005901, is an advanced basic contact probe designed for high precision and reliability in various technical applications. Engineered to function within an impressive temperature range of -45°C to +100°C, these probes are built to withstand demanding conditions while providing accurate performance. The probe's design utilizes beryllium copper for the plunger, plated with gold, ensuring excellent conductivity and durability. Coupled with its brass barrel, also gold-plated, this probe offers exceptional resistance to wear and corrosion, making it suitable for a multitude of uses in electronic testing and measurement environments.
-
Product
Basic Contact Probes (75 Mil) F07537B050G150
1006727
-
The Basic Contact Probes (75 mil) F07537B050G150 offer exceptional precision and reliability for various electronic testing applications. Featuring a robust brass construction with gold plating, these probes ensure optimal conductivity and durability. Capable of operating within a temperature range of -45°C to +80°C, they are suitable for diverse environments, making them ideal for professional technicians and engineers who require accuracy and versatility.
-
Product
Sanitary Conductivity Sensor (Ferrule Clamp Type)
FES-210L
-
The FES-210L Series sanitary conductivity sensors are electric sensors that target sanitation issues by employing a flat structure that keeps dirt from adhering to the tip of the sensor, and they enable continuous, high accuracy measurement in liquids of various concentrations, from purified water to cleaning solutions.The FES-210L Series, which is used in conjunction with the conductivity converter HE-960HS, demonstrates the optimum high sanitary characteristics that are ideal for the concentration and CIP management employed at food (beverage) and cosmetics plants.
-
Product
Universal Wear Tester
TF213
-
TESTEX Testing Equipment Systems Ltd.
Universal Wear Tester, to determine the wear and abrasion resistance of fabric used in clothing, footwear and industrials. Universal wear tester Supplies with surface abrasion head (inflated diaphragm method) and Flex abrasion head as well as necessary weights and initial supply of abrasives. Accessories are available for conducting frosting, pilling and edge abrasion tests.
-
Product
Charge/Discharge System Controller
PFX2500 Series
-
PFX2500 Series is a high performance Charge/Discharge system controller that takes measurements in combination with our DC power supply and electronic load in order to evaluate test sample (electric storage elements such as secondary batteries) characteristics. It is also capable to perform evaluation test with high-performance, large capacity and wide range of rating with the combination of DC power supply and electronic load.Execution of the test is conducted by the exclusive application software. The test corresponds to long time continuous test and synchronization test with temperature chambers with the multiplexed protection performance. In addition, easy data editing is also capable with fulfilling graphic performance.
-
Product
F11106B090G040
1001218
-
The Basic Contact Probe F11106B090G040 is designed for optimal performance in diverse applications and is backed by a robust technical specification. With a pitch of 50 mil (1.27 mm) and an operational temperature range of -45°C to +80°C, this probe ensures reliability across various environments. Its construction incorporates beryllium copper for the plunger, featuring gold plating to enhance conductivity and durability. This design choice minimizes typical contact resistance to an impressive 20 mOhm, allowing for superior electrical performance.
-
Product
Panel-mount Type Conductivity Meter (Four-Wire Transmission, For Low-concentration)
HE-480C
-
HE-480C connects conductivity sensor (ESH /FS Series) and measures conductivity and temperature in the sample water. This is a highly functional model, with high-performance temperature compensation, and is applicable to a wide range of tasks, from managing pure water for use with semiconductors, to managing the quality of boiler water.
-
Product
Conductivity and Total Dissolved Solids (TDS) Pocket Water Meter
LAQUAtwin EC-33
-
The only pocket meter that directly measures conductivity and total dissolved solids (TDS) in 0.12ml sample. No need for a beaker to calibrate your meter or measure a sample. Just place few drops of the standard or sample onto the sensor. This procedure saves you time and prevents wasting your precious sample.
-
Product
Pogo Connectors (≤ 3,50mm / 138mil) DSP197L030
1015628
-
The Pogo Connectors DSP197L030, with the order code 1015628, are precision-engineered components designed for reliable connectivity in various electronic applications. These connectors, characterized by a total length of 3.00 mm and an outer diameter of 2.60 mm, fall under the General Family P / P197. They stand out for their compact dimensions, making them an ideal choice in scenarios where space is constrained without compromising performance. Their design ensures optimal contact and conductivity, crucial for maintaining integrity in signal transmission.
-
Product
Portable Conductivity Meters
-
Labodam portable conductivity meters are adapted with different modes for measuring quality of water on parameters such as conductivity, TDS, and temperature. Due to their portable design, they are suitable for outdoor measurements i.e. on site water testing, remote area water testing, and for research purposes. They are reliable and user friendly.
-
Product
Basic Contact Probe F10006B300G060
1172550
-
The F10006B300G060 Basic Contact Probe is engineered for precision in both mechanical and electrical applications, making it an essential tool for professionals in various industries. With a wide temperature range from -45°C to +80°C, this contact probe is designed to perform reliably in diverse environmental conditions. Its typical contact resistance of just 20 mOhm ensures minimal energy loss, while the robust design allows for a continuous current capacity of 5.00 A, catering to high-demand applications. The neat integration of Beryllium copper for the plunger along with Gold plating enhances conductivity and durability, ensuring longevity and effectiveness in performance.
-
Product
XMC-PCIeStor, High Speed PCIe Quad M.2 SSD Adapter
9303
-
The 9303 is an air or conduction cooled, extended temperature XMC card with 4 M.2 SSD sites for multi-terabyte storage. Onboard Gen2 PCI Express (PCIe) switch connects one 4-lane upstream PCIe port to four 1-lane downstream ports.
