Product

Raptor HV High Voltage Tester

-

EUROSMC, S.A.

EUROSMC, S.A.

The Raptor-HV, also called the high voltage slave, is an optional product that extends the Raptor’s applications to tests that require the use of a moderately high AC voltage.

Product

High Performance Geophone

SG-10

-

Sercel Group

SG-10 - Sercel Group

The SG-10 was developed utilizing rare-earth magnet technology to achieve very low distortion and the highest tilt tolerance in the industry.

Product

RFID High Temperature Products

-

Contrinex AG

Contrinex AG

Contrinex RFID High Temperature Products

Product

High Voltage Power Capacitors

-

Lifasa - International Capacitors, SA

Lifasa - International Capacitors, SA

Capacitors of correction power of cos φ and filtering of harmonics for AT of Lifasa, are manufactured under the base of the container / stainless steel box and porcelain terminals. There are two types, depending on the connection mode that we are going to use:*Single-phase (1 or 2 terminals) with internal fuses, for connection to the network through a double star. Recommended for networks of tension superior to 11 Kv or need of equipment of high power.*Three-phase (3 terminals) with internal fuses, for direct connection to three-phase network. Recommended for voltage networks lower than 11 Kv.

Product

High Speed High Mix Pick And Place

MC389

-

Manncorp

MC389 - Manncorp

The MC389 sets new standards for SMT pick and place speed, precision, and flexibility. Based on the MC Series’ durable ball-screw and rotary-encoded drive train, its three heads and on-the-fly vision allow accurate placement of any SMD (including 01005 chips, µBGAs, and 12-mil pitch QFPs). With an enormous placement area of 650 mm x 460 mm (25.6" x 18.1") and a capacity for up to 160 Smart Tape and Stick Feeders, the MC389 can easily be configured for virtually any high-mix project.

Product

High Voltage Meter

STME-VM

-

Statclean Technology (S) Pte Ltd

STME-VM - Statclean Technology (S) Pte Ltd

This is a High Input Impedance Voltmeter with 70 Gigohm input impedance. Capable of measuring up to DC voltage up to +/-5.5kV with 1.0V resolution over a range of himidity and temperature, the meter measures with better than 1% accuracy without loading the power source. Its compact size and light weight body allows applications in laboratory and field work when powered by battery.

Product

High Sensitivity Pressure Sensors

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

High sensitivity ICP® pressure sensors are for low pressure measurements requiring excellent resolution and small size. They are used to measure small dynamic hydraulic and pneumatic pressures such as turbulence, noise, sound, and pulsations, especially in adverse environments. They are capable of measuring high-intensity sound pressures from 111 to 210 dB at any static pressure level from full vacuum to 1,000 psi (6,895 kPa).

Product

Frequency Doublers To 12 GHz

-

Pulsar Microwave Corporation

Pulsar Microwave Corporation

Pulsar Microwave Frequency Doublers utilize Schottky diodes in a bridge configuration to accomplish the frequency doubling. The input frequency operates from 0.2 to 6000 MHz. Frequency Quadruplers are also available using using this topology. Designs are matched to 50 Ohms and are available in a wide variety of package styles, such as plug-in, flatpack, and connectorized housings. Miniature surface mount packages are the most popular style, and are readily available on tape and reel for use in automated assembly applications.

Product

High Temperature Accelerometer

HA602-A100

-

Semapi Corp

HA602-A100 - Semapi Corp

Charge Amplifier for use with CM362 High Temperature Accelerometers, Acceleration

Product

AC Voltage and Frequency Transducers

NMTU/F

-

Metra Blansko a.s.

NMTU/F - Metra Blansko a.s.

The NMTU/F device is an AC voltage and frequency transducer with two independent analogous outputs. The A output measures AC voltage, the B output measures the frequency of input voltage. That´s why one single NMTU/F transducer is able to replace two customary transducers, thus making it possible to achieve significant savings in installation space.

Product

Single Frequency CW 532 NM Laser up to 18W

EQUINOX

-

M Squared Lasers

EQUINOX - M Squared Lasers

Equinox is a single frequency, 532 nm continuous wave laser designed for a range of scientific applications including pumping any Ti:Sapphire laser systems. It is engineered to meet the needs of experimentalists requiring high-performance systems with an emphasis on reliability, stability and ease of use. The laser incorporates pump diodes within the central unit and is fully automated with hands-free operation and control via ethernet, webpage and TCP/IP remote interface. This completely sealed system is inherently stable with low noise levels <0.05 % RMS and ultra-stable output powers with ±0.5 % stability. Equinox has options of high output power up to 18 W. Other major applications include mixing source, pump source for dye lasers and frequency doublers, optical tweezers, and biomedical imaging.

Product

Extreme Low Power Detector Laser Power Meters

11XLP12

-

Standa

11XLP12 - Standa

11XLP12 extreme low power detector is best suitable for low power im both the µW and mW regimes with very low thermal drift. Featuring broadband flat spectral response, minimal thermal drift and a noise equivalent power as low as 1 µW the 11XLP12 is ideally suited for measuring any pulsed or CW low power laser.

Product

R.F. Coupler and high Pass Filter

7415-3

-

Solar Electronics Company

7415-3 - Solar Electronics Company

There are those who disagree with the r.f. conducted susceptibility test setup of Method CS02 of MIL-STD-462. Homemade rigs have sprouted to comply with the coupling capacitor requirement, each with it own disadvantage. Our little Type 7415-3 R.F. Coupler is the answer. A neat little box with BNC connectors and a pair of binding posts, it is rated at 270 V.A.C. at the LINE terminals and 20 volts PMS into the GEN port. Looks good and does a fine job.

Product

High Power DC Power Supply

-

Maynuo Electronic Co.,Ltd

Maynuo Electronic Co.,Ltd

*Low ripple and low noise*High resolution and accuracy (0.1mV/0.01mA)*Built-in high-accuracy 5 1/2 voltmeter and milliohmmeter*Supporting high-accuracy and dynamic programming output*High-luminance VFD screen with two lines& four channels display*Intellegent fan system fan will be automatically initiated according to the temperature*Supporting remote voltage compensation and multidata storage*Supporting external trigger input and output*Power-on-self-test, software calibration and standard rack mount*Using standard SCPI protocol*Communication mode: RS232/RS485/USB.

Product

High Power/Anti-Surge/High-Voltage Resistors

ERJ-P Series

-

Panasonic Industrial Devices Sales Company of America

ERJ-P Series - Panasonic Industrial Devices Sales Company of America

Panasonic’s ERJ-P Series High Power Resistors offer the ability to use smaller case sizes while still maintaining the same level of power or better in respect to conventional size Thick Film Resistors. The ERJ-P Series has a unique trimming pattern and high heat dissipation characteristics. These parts can be easily designed as replacements for existing Thick Film Resistors due to comparable technology and materials with use of better manufacturing processes. The ERJ-P Series has an operating temperature of -55°C to 155°C, with a smaller part, you have a higher solder-joint reliability. Less material means less solder which lowers risk for solder fracture due to thermal expansion or contraction. Panasonic High Power Resistors are AEC-Q200 Qualified.

Product

High Slew-Rate High Power DC Electronic Load （100A/μS）

34110A-11（10KW）

-

PRODIGIT Electronics Co, Ltd.

34110A-11（10KW） - PRODIGIT Electronics Co, Ltd.

34000A Series has its own control and display panel, CC / CR / CV / CP / Dynamic modes, 150 sets Store / Recall memory which provides load set-up more efficiently, also can be remote controlled via GPIB、RS232、USB and LAN interface.

Product

RF Mixers & Frequency Converters Overview

-

Teledyne Lincoln Microwave

Teledyne Lincoln Microwave

Up and down conversion is often used because waveform generation in a transmitter is less expensive at lower frequencies and the dynamic range of analogue-to-digital converters in the receiver is higher at lower frequency.

Product

Suitable For Frequency And Pulse Sensors

SEM1600F

-

Labfacility Ltd.

SEM1600F - Labfacility Ltd.

The SEM1600F is a cost effective “smart” powered conditioner that accepts all common process pulse signals with a frequency range between (0.01 to 65000) Hz in standard configuration and (DC to 1000) Hz in counter mode. Typical applications would be to measure flow or batch counting.

Product

High Accuracy Revenue Meter

JEMStar II

-

Ametek Power Instruments

JEMStar II - Ametek Power Instruments

The JEMStar II has the highest accuracy in the market, provides many communication options and monitors your power quality to make it the ideal choice for any metering JEM application. An impressive color display makes it easy to view power measurements, phasor displays and meter diagnostics.

Product

Rubidium/GPS Frequency Standard

PXIe-3352

-

Astronics Corporation

PXIe-3352 - Astronics Corporation

The Astronics Test Systems PXIe-3352 frequency standard module sets a new standard for high density functionality in a PXI module by combining a Rubidium oscillator with a GPS receiver into a single, compact instrument.

Product

High Accuracy Mini Digital Multimeter

HH2109

-

Colluck Company Limited

HH2109 - Colluck Company Limited

High Accuracy (Basic Accuracy 0.7%). LCD display 2000 count, 12.8mm figure height. Manual Ranging at your choice (19 Range). Higher Voltage test up to AC 750V and DC 1000V. Higher Current test up to 10A

Product

High Voltage Surge Testers

HVST

-

Test Electronics

HVST - Test Electronics

The most important features of the surge tester are its ability to test the entire winding insulation system. A high voltage surge generates turn to turn, coil to coil, and phase to phase voltage stress, as well as ground insulation stress. When used as a dielectric test, accurate voltage readings are essential. The HV Surge Tester monitors the voltage directly across the winding under test. This voltage is displayed on an oscilloscope and recorded on the Pass/ Fail LED latch monitor. This voltage will be accurate despite the impedance of the winding being tested. The insulation system can be tested way above the operating voltage because of the brief duration of the applied voltage test pulse. This allows faults to be detected long before they become apparent at operating conditions.

Product

High Current Connectors

-

Panasonic Industrial Devices Sales Company of America

Panasonic Industrial Devices Sales Company of America

Panasonic’s offering includes various High Current Board-to-Board Connectors suitable for applications that require a connection to a power source/battery. These High Current Connectors have low mated height profiles, high reliability, and are manufactured with Panasonic's Tough Contact technology.