Product

Ground Lead with 2 mm Plug

PK007-028

-

Teledyne LeCroy

PK007-028 - Teledyne LeCroy

Ground Lead with 2 mm Plug.

Product

01 With Pins For PCB | 6 Positions | M8

01-1xxx-20/70xx-6-0

-

ELMA Electronic, Inc.

01-1xxx-20/70xx-6-0 - ELMA Electronic, Inc.

Multi wafer compact selector with 60° detent angle, 4 mm shaft diameter, 25'000 switching cycles and with up to 6 Ncm switching torque

Product

PS/2 Type Power Supply; ATX 500W

PS500-XP2

-

Axiomtek Co., Ltd.

PS500-XP2 - Axiomtek Co., Ltd.

*Input Range: 90 ~ 265VAC Full Range*Output Voltage:**+5V, 24A (0.3A min)**+3.3V, 24A (0.5A min)**+12V, 34A (1A min)**+12V1, 17A (1A min)**+12V2, 17A (1A min)**-12V, 0.8A**+5Vsb, 2.5A*MTBF(hours): At 25°C 100,000h*Safety: TUV, CUL, CB, IEC60950-1, GB4943-2001, UL60950-1, EN60950-1*Dimensions: 150 x 140 x 86 mm*Compatible with Axiomtek products: AX61221/AX61222/AX60501/AX60551/AX60552/AX61400/AX6145/AX6156/AX61492/AX61220

Product

Probe Card Analyzers

PB6800

-

Integrated Technology Corp.

PB6800 - Integrated Technology Corp.

The ITC line of Probilt, probe card analyzers provide fast, accurate and repeatable test data for all types of probe card technologies. Simple user definable vision parameters allow even the newest and most complex probe tip geometries to be captured and accurately measured. Probilt’s PB6800 large measurement chuck allows probe arrays as big as 300 mm in diameter to be touched down without overhanging the chuck surface.

Product

Thermal Warpage and Strain Measurement Tool

PS200S

-

Akrometrix, llc

PS200S - Akrometrix, llc

The TherMoir PS200S is a metrology solution that utilizes the shadow moir measurement technique combined with automated phase-stepping to characterize out-of-plane displacement forsamples up to 150 mm x 200 mm. With time-temperature profiling capability, the TherMoir PS200S captures a complete history of a sample's behavior during a user-defined thermal excursion.

Product

IP Surveillance Camera

ENVIROMUX-IPCAM

-

Network Technologies Inc

ENVIROMUX-IPCAM - Network Technologies Inc

View and control the camera from the ENVIROMUX web interface, the camera web interface, included software, or with a compatible cell phone. With the ENVIROMUX-2D/5D/16D, a triggered snapshot can be forwarded in alert e-mails. A snapshot can be triggered by any programmed event (motion detection, door open/close, glass break, smoke, liquid detection, etc.). Image sensor: 1/4" progressive scan CMOS sensor. Video Streaming: simultaneous Motion JPEG and MPEG-4. Frame rate: 30fps at 640x480 (VGA) resolution. Lens: F2.0, 4.0 mm (0.16 in). RJ45 connector. Wireless models: wireless IEEE 802.11 b/g up to 54 Mbps. Regulatory approvals: CE, FCC, RoHS.

Product

Manual Drive Unit

ATE MA350

-

INGUN Prüfmittelbau GmbH

ATE MA350 - INGUN Prüfmittelbau GmbH

Parallel contact stroke: 20 mm. Contact force max.: 300 N. Component on PCB: 58 mm. Pressure frame unit-opening angle: 66.Weight: 2,60 kg

Product

Manual Test Adapter With Rigid Needles

-

MicroContact AG

MicroContact AG

Frequently, manual test adapters are required for the functional and IC test. In order to contact the test subject, spring contact probes are often installed in the adapter, but the pitch of the spring contact probes is approx. 1.27 mm and thus too great for certain applications.

Product

Flatness Accessory Kit

55282A

-

Keysight Technologies

55282A - Keysight Technologies

The 55282A Flatness Accessory Kit is composed of an 10759A Footspacing Kit and two 10773A Flatness Mirrors. The footspacing kit provides three precision baseplates, with 50.8 mm (2 in), 101.6 mm (4 in), and 152.4 mm (6 in) pad spacing respectively, that minimize the grid setup and data accumulation time required for plate calibration. The flatness mirrors provide 100 percent reflectance and turn the direction of an incoming laser beam 90 degrees.

Product

01 With Soldering Eyelets | 12 Positions | M8

01-1xxx-00/30xx-12-0

-

ELMA Electronic, Inc.

01-1xxx-00/30xx-12-0 - ELMA Electronic, Inc.

Multi wafer compact selector with 30° detent angle, 4 mm shaft diameter, 25'000 switching cycles and with up to 6 Ncm switching torque

Product

Multi-Sensor Core Logger

-

Geotek Ltd.

Geotek Ltd.

The Geotek Multi-Sensor Core Logger (MSCL) systems enable a suite of geophysical measurements to be obtained rapidly, accurately and automatically on sediment or rock cores. The rugged nature of the equipment makes it suitable for use in either an onshore laboratory/repository environment or onboard survey and drilling vessels. All of Geotek’s core loggers accept core between 50 mm and 150 mm in diameter and up to 1.55 m in length. Geological cores and materials come in a variety of sizes therefore the MSCL and X-ray CT systems are designed for a full range of core material in a variety of liner compositions. To accommodate varying customers’ requirements (both operational and scientific), we provide a range of different core loggers and X-ray CT systems:

Product

4-in-1 OSLT Calibration Kit, DC to 70 GHz, Type-1.85 mm (f)

CK058F

-

Spanawave Corporation

CK058F - Spanawave Corporation

The Network Analyzer Calibration Kits with open, short, load, and thru (OSLT) provide the RF components needed to enable stable and accurate error correct measurements. Calibration of a network analyzer using Spanawave's Network Analyzer Calibration Kits allow for precise measurements. The Calibration Kits offer broad test equipment coverage for use with the 8003 Scalar Network Analyzer as well as being compatible with most network analyzers produced by other manufacturers. Spanawave calibration kits yield complete calibrations, as it takes into consideration the three major sources of systematic error correction by one port calibration at both ports.

Product

IEEE 802.11ax (2.4GHz + 5GHz) + Bluetooth 5.3, M.2 2830, PCIe-UART

AIW-165

-

Advantech Co. Ltd.

AIW-165 - Advantech Co. Ltd.

NXP 88W90982Tx/2RxIEEE 802.11 a/b/g/n/ac/ax (2.4GHz/5GHz) + BT 5.3Form factor: M.2 2830 E keyWi-Fi: PCIe; Bluetooth: UARTOS: LinuxOperating Temp: -40 ~ 85 °C (-40 ~ 185 °F)28 x 30 x 3.95 mm (1.10 x 1.18 x 0.15 in)IC: NXP 88W9098

Product

Classic Collet | Black | With Line | Matt Or Glossy | Ø 14.5 Mm

021-3x20/5

-

ELMA Electronic, Inc.

021-3x20/5 - ELMA Electronic, Inc.

Secure plastic mounting cap for collet or wing knob

Product

Multi-Wire Fiber Jacket Stripper - TFS-304-12

-

Shanghai Fibretool Technology Co.,Ltd.

Shanghai Fibretool Technology Co.,Ltd.

1. This stripper is suitable for stripping duplex and multi-core Fiber Cables: 4 cores ×1.2mm cables and 2 cores ×1.8mm and other optical cables.2. 2~4 core cable can be stripped by one operation3. Cable stripping length is adjustable from 5 mm-42 mm4. All cutting surface are precision formed, hardened, tempered and anti-rust 5. The comfort anti-fatigue design handle ensures long-term workmanship 6. Length: 161 mm, weight: 145.50g

Product

OTDR

OT700 series

-

Shanghai Tarluz Telecom Tech Co., LTD

OT700 series - Shanghai Tarluz Telecom Tech Co., LTD

SM OTDR, MM OTDR, visual fault locato), PON online test, Optical Power Meter, Optical Laser Source, Fiber Microscope, Ready for all kinds of environment.

Product

Four-Point Probe

-

Materials Development Corporation

Materials Development Corporation

Materials Development Corporation offers the complete line of Four Point Probe systems from AIT. Systems are available to measue up to 12" diameter (300 mm) wafers as well as specialty systems for Photovoltaic wafers and substrates. For more information on these systems, contact MDC.

Product

Kilowatt Hour Meters

-

Howard Butler Ltd.

Howard Butler Ltd.

DIN96 energy meters for measuring kWh of individual machines or complete systems. Manufactured to BS5685, IEC521 with a class accuracy of 1% to IEC1036, and supplied in a 96 x 96 mm DIN case. The kilowatt hour meter has a 7 digit non resettable mechanical counter. Pulsed output is available to send to PLC’s data loggers and computers. Analogue mA output is also available.