Filter Results By:
Products
Applications
Manufacturers
Absolute Pressure
combined gauge and atmospheric pressure.
See Also: Pressure, Differential Pressure
-
product
Variable Reluctance Absolute Pressure Sensor
AP10
The AP10, Absolute Pressure Sensor, is designed for low and medium pressure measurements, to laboratory accuracy, of corrosive liquids and gases. In typical AC excited bridge circuits, this transducer delivers a full-scale output of 40 mV per volt at 3kHz. The unit operates with carrier systems including the Validyne CD15 sine wave carrier demodulator and CD16 miniature DC input DC output carrier demodulator to produce a high level analog DC output suitable for recording and control.
-
product
High Performance Heated Absolute Pressure Transducers
These high performance Baratron® capacitance manometers have the sensor located in a temperature controlled constant temperature oven for improved accuracy. They are available with an analog output or digital communications for measuring absolute pressure.
-
product
AA06A Baratron® Absolute Pressure Sensor
AA06A Baratron® absolute pressure sensors are single-ended dual-electrode/AC bridge devices that are extremely stable and designed to minimize the effect of temperature changes. Full Scale ranges are available from 25,000 Torr down to 0.1 Torr. Each range measures down to 1 part in 106 Full Scale with selected percent Reading accuracy limited by this resolution and with accuracies ranging from 0.25% to 0.05% of Reading. They are constructed of Inconel® and stainless steel, allowing use with many wet, dirty, or corrosive gases.
-
product
General Performance Absolute Pressure Switches
These absolute vacuum / pressure switches offer fast, accurate, and reliable protection for vacuum equipment and processes. Designed for applications where a DC signal output is not required, these pressure switches provide relay outputs that are readily interfaced with alarms, valve actuators, computers, process controllers, or other protection devices.
-
product
Absolute Pressure Transmitters
Absolute pressure transmitter from ABB offers a broad variety of communication possibilities. Another highlight of our sensors is the measurement accuracy up to 0.04 %.
-
product
Digital Absolute Pressure Meter
Model KM 8070
Kusam Electrical Industries Limited
KM 8070 is an absolute pressure measuring instrument with 8 units (Pa, hPa, mbar, mmH2O, mmhg, inHG, in H2O, psi). It is normally used to measure absolute pressure, e.g. for pressure compensation in velocity measurement in ducts, laboratories and production processes. Barometric measurement and height measurements between two points are also possible. With hold, MAX, MIN, and AVG function, KM 8080 is widely used in HVAC, Laboratories and architecture project. With our reputation for quality products, you can find it is the most economic instruments for pressure meter.
-
product
Absolute Pressure Instruments
Measuring refrigerant charge in AC/refrigeration systems. It is used for servicing, troubleshooting, and documenting the operation of residential or commercial AC/refrigeration systems. When two 549i are used in conjunction with two 115i pipe-clamp temperature probes, it is easy to monitor superheat and sub-cooling in AC/refrigeration systems.
-
product
Micromanometer – Thermometer – Data Logger – 200 mbar f.s.
HD2134.2
Portable Micromanometer-Thermometer Data Logger with 200 mbar built-in sensor. It performs measure of absolute, relative, differential pressure and temperature.
-
product
Miniature Pressure Transducer
EPT1200
The EPT1200 series of Pressure transducers has a miniature design using a hermitically welded, thin filmmeasuring cell, coupled with high level output circuitry. This technology ensures this sensor is suitable for some of industries harshest environments, including automotive, industrial hydraulics, refrigeration, off-road, construction and agricultural applications. The EPT1200 and 1500 series offer measurements in gauge and absolute pressure, with ranges up to 400 Bar and are backed by a one-year warranty.Miniature design | Rugged construction | Wide operating temperature range | Long life High performance
-
product
Multi-Sense Humidity Probe
HP125 Series
The HP125 Multi-Sense Humidity Probe is a cost effective, easy to use solution to many industrial and laboratory measurement and control applications. The HP125 probe exploits the latest advancements in polymer humidity sensing technology and compact electronic circuitry. It is designed to continuously measure up to 4 measurement parameters using a single intelligent sensor tip including RH%, calculated Dew Point, Temperature and either Absolute Pressure or Barometric Pressure!
-
product
Manometer – Thermometer – 2 Inputs
HD2124.1
Handheld manometer-thermometer with two inputs and LCD display. It performs measure of absolute, relative, differential pressure and temperature.
-
product
High Performance Pressure Transducers
Repeatably Accurate Pressure Measurement. Our high performance Baratron® capacitance manometers measure gas independent, absolute pressure at high accuracy and with high repeatability. Accuracy is specified as a percentage of the reading for an accurate output signal even at the low end of the scale.
-
product
Pressure Sensors
The output voltage changes with the absolute pressure applied to the pressure port. The gain, offset and thermal drift of the pressure sensor is digitally compensated to minimise errors and to create a single-ended, amplified output in the 0 to 5 Volt range.
-
product
Pressure/ Vacuum Sensors
There are three different types of pressures that can be measured using Premier Electrosystems' Pressure Sensors: Gauge, Absolute, and Differential. Gauge pressure is the pressure measured relative to the ambient atmospheric pressure.A typical application for a gauge pressure sensor is to measure liquid levels in a vented tank using the difference in hydrostatic pressure and ambient atmospheric pressure. Absolute pressure sensors will give the result relative to zero (a perfect vacuum). This is useful in applications where there is a direct effect of altitude on the pressure being measured. Differential pressure sensors measure the difference in pressure between two points. Differential pressure sensors are often used to monitor airflow in HVAC applications.
-
product
T6990 ENTRY LEVEL ABSOLUTE PRESSURE DECAY LEAK TESTER
T6990, recalculating the success of its predecessor M6990, an obviously enhanced user interface, thanks to an innovative tempered glass panel with built-in capacitive keyboard, around a 3.5” colour display.The new, high resolution display makes it even easier to view the test cycle and the programming menus, and the capacitive keyboard allows fast parameter entry.
-
product
Analog And Digital Flow Meters
4000 Series
Whether measuring gas flows in a laboratory or manufacturing setting, TSI thermal mass flow meters provide accurate results with multiple data output options. The TSI 4000 Series inline flow meters were designed for ultra-low pressure loss to minimize flow circuit back pressure and its impact on the system. The meters include digital and analog outputs for flow rate, absolute pressure, and temperature. Volume measurements can be made through the RS232 digital interface.
-
product
General Performance Pressure Transducers And Switches
These general performance Baratron® capacitance manometers are available as pressure transducers with an analog signal proportional to absolute or differential pressure, or as switches with relay outputs based on pressure.
-
product
Pressure Micromanometer – Thermometer Data Logger
HD2164.2
Portable Micromanometer-Thermometer data logger with 2000 mbar built-in sensor. It performs measure of absolute, relative, differential pressure and temperature.
-
product
High Performance Baratron® Absolute Pressure Transducers
These high performance Baratron® capacitance manometers operate at ambient temperature. They are referenced to vacuum for gas independent, direct measurement of absolute pressure.
-
product
Pressure Gauges
All of our pressure gauges are controlled by micro processors to guarantee the highest accuracy. They determine absolute pressure, negative pressure or differential pressure in air and liquids devices perfect for a research and development environment. At PCE, you can find a high-quality pressure gauge which is suitable for extreme operating environments and meets the highest industry standards. They can even be used in small places, little holes, tubes or pipes. Some pressure gauge series have the capability to transfer data to a computer, a printer or a storage device.
-
product
Vacuum Meters
Portable meters for absolute vacuum pressure measurements in hospital labs, crystal growing, solvent recovery, distillation, and rotary evaporation.
-
product
Ultra Low Pressure Transmitter
P532
Validyne's P532 Pressure Transmitters are ideally suited for measuring extremely low liquid and gas pressures in industrial applications. Full-scale differential pressure ranges from 0.10 H2O to 2 H2O with line pressure rating of 100 psig, and ranges of 2 H2O to 3200 psid with line pressures up to 3200 psig are offered. Gauge pressure ranges start at 0.10 H2O and absolute pressure from 0.08 psia full-scale. This unique design, which utilizes a diaphragm-type variable reluctance pressure sensor, provides many outstanding advantages including:
-
product
Barometric Pressure Transmitter
Comptus Barometric pressure sensors utilize an integrated silicon, absolute pressure sensor with internal temperature compensation. The sensor is mounted to the signal conditioner board. A 3/16 inch diameter tube may be attached to the sensor to provide remote pressure sensing. The output of the sensor is scaled to provide the desired output signal.
-
product
High Temperature Absolute Pressure Transducers
Our high temperature Baratron® capacitance manometers are controlled to temperatures of 150°C or higher for use use in demanding semiconductor manufacturing vacuum processes such as metal etching and nitride film chemical vapor deposition (CVD).
-
product
Pressure Recorders
AMETEK Sensors, Test & Calibration
Our recorders are capable of storing gauge pressure, absolute pressure, temperature, current, and voltage. They can collect readings as quick as ten times per second, and can store up to 1 million data points. The included easy-to-use software communicates with the recorders and then saves the data into industry standard spreadsheets or tamper-proof pdf documents. With the nVision family, recorded runs can also be viewed on the graphical display of the unit itself.
-
product
Air Velocity Meter
Measures air speed, temperature and humidity. It is ideal for spot measurements at air outlets on account of its 30mm vane. In addition to air speed and temperature, also measures air moisture and absolute pressure.
-
product
Digital Pressure Meter
ZET 7012-A-VER.1
Digital pressure meter ZET 7012-A in BP4-1 casing is used for fast and simple absolute pressure measurements and measured values data transfer in digital format via RS-485 or 4-20 mA interface.
-
product
Manometers
GAOTek has developed advanced manometers that are high quality, affordable, and accurate. They are versatile instruments designed for the measurement of different pressure levels. We have a wide variety of manometers available for measuring the pressure of both liquids and gases whilst maintaining ease of use. Manometers are used as a pressure instrument and for calibration of other instruments. They can be used to measure gauge pressure, differential pressure, and absolute pressure and are generally used to measure pressures as high as 100 inches of 2.95 Red Fluid (10.65 PSI). Our products are designed to bring users the best experience when it comes to measurement, emphasizing effectiveness and efficiency above all else, and are for sale to the United States, Canada and globally.
-
product
Industrial Absolute Pressure Transducers
These industrial Baratron® capacitance manometers feature absolute pressure measurement, industrial enclosures, and higher operating temperature ranges for industrial applications.
-
product
Digital Pressure Meter
ZET 7012-A-VER.3
Digital pressure meter ZET 7012-A-VER.3 is used for fast and simple absolute pressure measurements and measured values data transfer in digital format via RS-485 or 4-20 mA interface.
