Push Pull Force
stength necessary to press on and extract.
See Also: Force, Compression, Crimp Force, Pull Force, Pull off Force, Peeling, Tension, Gravity, Electrical, Magnetic
-
Product
Scanning Probe Microscopy/Atomic Force Microscopy (SPM/AFM Analysis)
-
Rocky Mountain Laboratories, Inc.
Scanning probe microscopy (SPM) refers to a family of measurement techniques that utilize a scanning probe. The most common measurement is Atomic Force Microscopy (AFM Analysis), which measures surface topography. Imaged areas can be from the nm scale to as large as 100 µm X 100 µm. Heights and depths of features can be measuredand many surface roughness parameters, e.g Ra, can be calculated. 3-D images can also be produced for dramatic data presentation. Magnetic and electrical response can also be measured with SPM.
-
Product
Push Back Probes (VF3) VF383B0007G15
1006292
-
The Push Back Probes (VF3) model VF383B0007G15 is meticulously engineered to deliver exceptional precision and reliability in various applications. With a pitch of just 3.00 mm, these basic contact probes are optimized for tight spaces, ensuring accurate measurements and connections. Designed to withstand extreme temperatures ranging from -45°C to +100°C, they are suitable for a wide range of environments, making them a versatile choice for both industrial and laboratory settings.
-
Product
Electromagnetic Force Micro Tester
Micro-Servo
-
This is a multi-functional fatigue testing machine suitable for specimens, structures and full-sized parts. It is an overhead actuator type with a broad test space, so it is ideal for various types of environmental tests, such as those in corrosion tanks or constant temperature tanks.
-
Product
Sensor Products: Weld Force Gage
90061
-
Model 90061 is a self-contained, portable measurement system which allows auditing of the pinch force generated between the electrodes of resistance spot welders. Resistance welding uses a pair of electrodes to clamp two base metals firmly together prior to and during application of electrical current. Poorly clamped parts result in a defective joint. A correctly clamped assembly aids in reducing the resistance in the joint and allows the current flow to properly heat the base metals to weld the part.
-
Product
Snap Tester (Button Pull Tester)
TF145
-
TESTEX Testing Equipment Systems Ltd.
Snap Tester (Button Pull Tester), to determine the holding or breaking strength of prong-ring attached snap fasteners onto garments or toys, also as a Push Pull Tester for compression and tensile testing of small samples(special attachments are available).
-
Product
Force Gauges
-
Mark-10 digital force gauges can be used in a virtually limitless number of tension and compression force testing applications. All force gauges are able to capture the peak force in both tension and compression and have selectable units of measurement. Force gauge capacities are available from 50 gF full scale to 2,000 lbF, the broadest force range in the industry. Mark-10 force gauges may be handheld or used with a force test stand and gripping fixtures to create a complete testing solution.
-
Product
Push Back Probes (VF100) VF10005B220G15
1005144
-
The Push Back Probes (VF100) VF10005B220G15 are meticulously designed contact probes ideal for various applications, boasting a pitch of 2.54 mm and temperature endurance ranging from -45°C to +100°C. With their reliable construction, these probes provide a continuous current of 5 A and maintain a typical contact resistance of just 30 mOhm. The mechanical specifications are equally impressive, featuring a preload of 120 cN and a spring force of 1500 cN, ensuring durability and consistent performance across their nominal travel of 5 mm and maximum travel of 5.50 mm.
-
Product
High Force Type Probe For PCB, K100 Series 100mil Pitch, Type L, Ø1.50mm, 305gf
K100-L150305-SKAU
Spring Probe
K100 Series, Pitch 100mil, Tip Style L, Tip Diameter Ø1.50mm, Spring force 305gf, Steel with Gold Plating.
-
Product
Cable Pulling Analysis
CABLE
-
CABLE quickly solves complex three-dimensional cable pulling tension and sidewall pressure calculations, allowing you to make rapid and accurate design decisions.Don't leave installation to chance.
-
Product
Force Tensiometers
Sigma 703D
-
Sigma 703D is a simple and robust digital force tensiometer for accurate measurement of surface and interfacial tension (Platinum Du Noüy ring, Platinum Wilhelmy Plate), and density. Manual measurement of Critical Micelle Concentration (CMC) can also be conducted.
-
Product
Force Gauges
-
Morehouse Instrument Company Inc.
Minimize user error and achieve higher accuracy with Morehouse Digital Force Gauges. These instruments display the applied force value directly and do not need an interpretation table. Morehouse analog Ring Force Gauges can also be upgraded to the new digital system.
-
Product
Force Sensor Elements
-
The STL Force Sensing Tension Links are a series of unique force sensors. The Tension Links utilize the internal strain gage process sucessfully and are used in bolts, load pins and flat load cells. The sensing element consists of a strain gage bridge circuit internally installed in a small hole along the longitudinal axis. This unique arrangement provides a most effective means for the protective sealing of the internal electronics while minimizing the adverse effects of extraneous torsion and bending loads.
-
Product
Push Back Probes (VF4) VF483B0001G10
1005204
-
The Push Back Probes (VF4) VF483B0001G10, also known by the order code 1005204, is a high-performance basic contact probe designed to meet the rigorous demands of various applications. With a pitch of 4.00 mm and capable of operating across a wide temperature range from -45°C to +100°C, these probes are perfect for environments that require reliability at extreme thermal conditions. Their design incorporates advanced materials, specifically beryllium copper for the plunger and gold plating that ensures minimal contact resistance, which typically stands at around 30 mOhm. This makes the probes exceptionally reliable for high-power applications where electrical integrity is paramount.
-
Product
ThermalAir Series Temperature Forcing System
ThermalAir TA-3000B
-
The ThermalAir TA-3000B high capacity thermal air stream system is used for temperature testing, fast thermal cycling, and device temperature characterization of components, hybrids, modules, PCBs, and other electronic and non-electronic assemblies at precise temperature from -65°C to +225°C. Compact! Plus Performance!
-
Product
High Force Type Probe For PCB, K100 Series 100mil Pitch, Type D, Ø0.80mm, 305gf
K100-D080305-SKAU
Spring Probe
K100 Series, Pitch 100mil, Tip Style D, Tip Diameter Ø0.80mm, Spring force 305gf, Steel with Gold Plating.
-
Product
Compact Hydraulic Vibrator Force Simulator
JF Series
-
The JF Series Force Simulator was developed with the emphasis on light weight, compact size and ease-of-use as a general-purpose, compact jack for the Servopulser system. Testing systems installed with the Force Simulator can easily perform endurance, fatigue and simulation tests on small structural members and various other structural members, which helps improve the logical design and reliability of products.
-
Product
Thermocouple Temperature Transmitter PC Programmable With Push Button Calibration
SEM1605/TC
-
The SEM1605TC is the next generation cost effective DIN rail mounted temperature transmitter from Status Instruments. It has been designed to accept most common Thermocouple temperature sensor inputs
-
Product
Push Back Probes (VF4) VF422B0001G15
1022238
-
The Push Back Probes (VF4) model VF422B0001G15 is engineered for precision in challenging temperature environments, with a remarkable operating range from -45°C to +100°C. This basic contact probe features an optimized pitch of 4.00 mm, ensuring effective electrical connectivity in various applications. Its design is tailored for rigorous use, exemplified by a continuous current rating of 10A and a low typical contact resistance of just 30 mOhm, making it ideal for high-performance settings where reliability and performance are paramount.
-
Product
IEC60884 Fig20 Flexible Cord Retention Force Test Apparatus
IEC60884 Fig20
-
Shenzhen Chuangxin Instruments Co., Ltd.
IEC60884 Fig20 Flexible cord retention force test apparatusMeet the standard: GB2099.1-2008 Article 23.2 and Figure 20, IEC60884 Figure 20, VDE0620 Uses: It is used to check whether the plug wire and the electrical accessory are firmly fixed. Sample range: detachable plug, detachable mobile socket, non-removable plug and non-removable mobile socket
-
Product
Force Transducers
-
Metra Meß- und Frequenztechnik Radebeul GmbH & Co. KG
Piezoelectric force transducers are suited for the measurement of tensile and compression force.
-
Product
High Force Type Probe For PCB, K100 Series 100mil Pitch, Type I, Ø1.26mm, 305gf
K100-I126305-SKAU
Spring Probe
K100 Series, Pitch 100mil, Tip Style I, Tip Diameter Ø1.26mm, Spring force 305gf, Steel with Gold Plating.
-
Product
Push Back Probes (VF3) VF306B200G15
1040765
-
The Push Back Probes (VF3) model VF306B200G15, identified by order code 1040765, is a versatile basic contact probe designed for reliability in various applications. This model operates effectively over a wide temperature range of -45°C to +100°C, making it suitable for diverse environments. The probe features a unique pitch of 3.00 mm (118 mil), ensuring precise connectivity in confined spaces. With a continuous current capacity of 8.00 A and a typical contact resistance of just 30.00 mOhm, it guarantees excellent electrical performance.
-
Product
Ergonomic Force Gauges
-
The ergonomic gauges from Chatillon are ideal for functional capacity evaluations and basic muscle strength measurements where economy and ease-of-use are essential. Simplicity is a key design criterion for these ergonomic gauges. They are an excellent, low cost solution for tensile or compression testing.
-
Product
Economic Extreme Power Temperature Forcing System
ECO Cool Dual Edition
-
Mechanical Devices is pleased to offer its customers with the first direct phase change TCU with DUAL head. Each head can be controlled individually. This DUAL head unit makes it possible to reduce the cost per workstation, saves space, reduces power consumption and heat emission in the laboratory or production hall.MD Thermal control units were designed with high efficiency and flexibility in mind, allowing for customization to suit different package and interface variations. The system allows for temperature forcing across a wide range of device sizes and types, whether socketed or soldered to the board.
-
Product
Force Testing
-
Force testing is a way of determining how an object will react when it is subjected to tensile or compressive loads
-
Product
Push Back Probes (VF3) VF317B270G15
1010459
-
The Push Back Probes (VF3) model VF317B270G15, part number 1010459, is designed as a basic contact probe that excels in versatile applications requiring precise measurement and reliability in challenging environments. Engineered to operate effectively within a temperature range of -45°C to +100°C, these probes ensure durability across extreme conditions. Their design features a pitch of 3.00 mm, making them suitable for detailed electronic interfacing where accuracy is paramount. With a maximum travel of 5.50 mm and a pointing accuracy of ±0.10 mm, users can expect exceptional performance in tight spaces, elevating their prototype designs to the next level.
-
Product
Push Back Probes (VF4) HVF4
1001841
-
The Push Back Probes (VF4) HVF4, identified by Order code 1001841, are innovative components designed to enhance the functionality of electrical systems. With precise measurements of a total length of 34.00 mm, these probes are engineered with optimal performance in mind. The press ring diameter of 3.70 mm and outer diameter of 3.50 mm ensure a snug fit within various receptacles, while the collar height of 5.70 mm facilitates secure connections. This robust design caters to a variety of industrial applications, promising reliability and longevity in demanding environments.
-
Product
Push Back Probes (VF3) VF317B180G15
1005301
-
The Push Back Probes (VF3) VF317B180G15 is a highly specialized contact probe designed for precise electronic applications. With a pitch of 3.00 mm, these probes are capable of operating within a temperature range of -45°C to +100°C, making them suitable for various environments. The probes feature a robust design with a basic contact configuration that ensures reliable performance under continuous currents of up to 8.00 A, with a typical contact resistance of only 30.00 mOhm.
-
Product
Push Back Probes (VF4) VF406B400G25
1002338
-
The Push Back Probes (VF4) VF406B400G25, with order code 1002338, is an essential component designed for high-performance applications, particularly in testing and probing scenarios. This model features a basic contact probe configuration characterized by its compact design and superior functionality, capable of operating within a temperature range of -45°C to +100°C. With a pitch of 4.00 mm and a total length of 69.70 mm, the VF406B400G25 ensures precise applications, while its robust construction materials, including Beryllium copper for the plunger and brass for the barrel, provide enhanced durability and reliability under various conditions.
-
Product
Conductivity Type (P/N) Checker By Contact Thermo-electromotive Force Method (seebek Effect)
PN-12α
-
*Thermo electrode and cold electrode is mounted detecting part of measuring probes*Possible to check most figure of sample such as single crystalline silicon wafer, bulk, ingot and so on*Please select from 2 types;1) 2 probe ver.(Hot probe, Cold probe),2) 1 probe ver.(Hot & Cold probe)
