Kelvin
-
Product
Banana-Triax Adapter For 4‑Wire (Kelvin) Connection
N1297B
Accessory Kit
The N1297 Series is a collection of banana-triax adapters for the Keysight B2900 Series precision source measure unit (SMU). It consists of both 2-wire as well as 4-wire connection requirements.
-
Product
Kelvin Probes H810KB
1008053
-
The H810KB, also referred to as the Kelvin Probes (F810), is a specialized device designed for precision applications in electrical measurements. Its robust construction and meticulous engineering ensure reliable performance across various scenarios. With a pitch of 2.54 mm and a continuous current rating of 3.00 A, this tool is ideally suited for applications requiring accurately gauged electrical connections and measurements.
-
Product
Kelvin Probes H822
1017355
-
The H822 Kelvin Probes, identified by order code 1017355, are renowned for their precision and reliability in temperature measurement applications. Designed with a total length of 15 mm and a press ring diameter of 5 mm, these probes cater to various technical needs across multiple industries. The slim profile of the outer diameter measuring 4.70 mm and a collar height of 0.30 mm ensures versatility in tight spots, making them a crucial tool for both laboratory and industrial environments.
-
Product
Micro-Ohmmeters
-
The Micro-ohmmeter performs reliable low resistance measurements with test currents to 10A and resolution to 1. Uses a four-wire Kelvin bridge method, which eliminates test lead resistance for a measurement accuracy of 0.25%.
-
Product
Four Terminal Precision Resistors
AH
-
A-H resistors are constructed with four terminal, isolated voltage and current connections(.i.e. Kelvin Connection) making them suitable for very precise current measurements, current limitations and current regulation in power units, current sources and electronic loads.
-
Product
Slip Ring Test System
-
This is a high specification tester that will measure many cable parameters. It measures cable resistance very accurately using the Kelvin 4-wire method. It also tests for shorts between pins at a low voltage. The next test is to measure insulation between connections at a higher voltage. This is carried out at up to 1500 Volts DC with resistances of 10 to 500 Meg ohms.
-
Product
Banana-Triax Adapter For 2‑Wire (Non-Kelvin) Connection
N1297A
Accessory Kit
The N1297 Series is a collection of banana-triax adapters for the Keysight B2900 Series precision source measure unit (SMU). It consists of both 2-wire as well as 4-wire connection requirements.
-
Product
F83211S0021L650
1057671
-
The F832 Probes, specifically the model F83211S0021L650, are advanced Kelvin probes designed for precise electrical measurements in various applications. With a operational temperature range of -45°C to +200°C, these probes ensure reliable performance even in extreme conditions. The coaxial design is engineered for minimal noise and high fidelity in low-current applications, making it a vital tool for engineers and technicians in laboratories and field testing environments.
-
Product
Micro - Ohmmeter / Milli - Ohmmeter
-
Basic Accuracy 0.25%Max. Test Current : 5A (120mV) for 7002Max. Test Current : 10A (60mV) for 7272Manual or Auto RangeFour Terminal Kelvin Measurement6 Ranges with 1mV Best ResolutionMeasurement of Resistive and Inductive MaterialsSetting for HI, LO & PASS ReadingsMemory of 3000 Measurements DataProgrammable HI-LO Alarm with memory of 20 DataLarge LCD with Backlight & HOLD FunctionLow Power ConsumptionBattery Operated with AC AdaptorLow Battery (Voltage) AlarmLED indication for Invalid Resistance MeasurementCable Length Measurement in feet & metersUser Interface Software for PC Communication via RS232C(to USB Bridge) cableBuilt-inBatery Chaging Circuit & Calender Clock
-
Product
Test Contactor/Probe Head
Hydra
-
Engineered for excellence and efficiency, Hydra™ spring probe series offers precision, reliability, and standardized semiconductor test interface.Designed to be best-in-class at a competitive price point, Hydra is optimized to maximize your operational efficiency. Hydra is built to withstand demanding high-volume manufacturing test environments with its robust and durable design.With a common test-height, Hydra offers the ability to mix and match power, RF, and Kelvin probes within the same test socket. In addition, Hydra streamlines inventory management with fewer probe part numbers to manage and shorter lead times.
-
Product
Kelvin Probes (F832) F83205S0001L650
1008249
-
The Kelvin Probes (F832) F83205S0001L650, designated with order code 1008249, offer advanced coaxial probe technology designed for a variety of precision measurements. Operating effectively in environments ranging from -45°C to +200°C, these probes are constructed with premium materials including a beryllium copper plunger plated with gold, and a brass barrel also featuring gold plating. This ensures not only durability but also reliable electrical performance under various conditions, permitting continuous current levels of up to 6.00 A. The probes are engineered with a nominal travel of 2.00 mm and feature a spring force of 450 cN, offering precise contact and reducing the chances of wear over time.
-
Product
Connector Test
-
A connector test system which provides expansion of up to 160 Kelvin pair connections. The system incorporates high voltage AC and DC power supplies with a maximum output of +/- 2100 Volts peak for Hi Pot, Insulation resistance measurement. LCR bridge control is provided with 4 terminal multiplexing in order to add precision capacitance, inductance and resistance measurement capability. An integral H.V. capacitor bias option permits capacitance measurement to be made at up to 2.1kV.
-
Product
Medium Kelvin Clip Lead
16089B
Accessory Kit
Measure odd-shaped components that you cannot measure using conventional fixtures
-
Product
Temperature Monitor
SIM922A
-
Stanford Research Systems, Inc.
The SIM922A has a programmable, precision 10 µA current source to provide sensor excitation. Results can be displayed in either kelvins or volts.
-
Product
Micro-Ohmmeter
LOM-510A
-
The Micro-Ohmmeter has 4 digits, 0.02% basic accuracy and 1 resolution. The 4-terminal kelvin measurement connection minimizes lead resistance errors and 80 dB of ac noise rejection provides rock-steady readings even in noisy locations. The micro-ohmmeter comes with rugged 4-terminal test clips and a large selection of optional probes, clips and fixtures allowing attachment to any low-resistance unknown.
-
Product
Diode Scanner
SC924
-
Frothingham Electronics Corporation
The SC924 is an electromechanical device for testing diodes loaded on burn-in boards.A set of Kelvin contacts is indexed from diode to diode. The contacts move over a range of 24 inches in the X direction and the table holding the boards moves over a range of 9 inches. This allows scanning of multiple burn-in boards or boards with multiple rows of diodes.
-
Product
Specialist Test Probes
-
High Current Test Probes, Ultra-high Current Test Probes,Kelvin Test Probes, High Frequency Test Probes, Switching Test Probes
-
Product
Cryocooler
CryoTel® DS30
-
The CryoTel® DS 30 Stirling cryocooler offers efficient, reliable, compact and high power cooling to the market in the temperature range of 35 to 250 Kelvin. The DS30 was optimized for applications in which SWAP (size, weight and power) and reliability are concerns. The DS30 consumes considerably less power than other cooling alternatives and requires no maintenance, making it ideal for strategic as well as industrial applications. Both the cold head and the pressure wave generator can be mounted in any orientation. Application examples include semiconductor manufacturing, large infrared detectors, RF receivers or antennas, astronomical telescopes, laser cooling, high-temperature superconductivity, cold traps, and others.
-
Product
Kelvin Clip Test Lead Set
5940
-
Kelvin Clip Test Lead Set. Ideal for resistant measurementsbelow 1 ohm.
-
Product
Precision Micro Ohmmeter
BS407
-
High basic accuracy of 0.1%Wide range of 1 µΩ to 20 kΩCurrent reversal switch for detecting thermal EMF effectsCurrent diversion switch for easy zeroingFour terminal measurement using Kelvin clip leads (supplied)Battery operation with built-in charger20mV clamp for "dry circuit" testing
-
Product
Kelvin Probes (F800/F805) F80518B0002G250
1031155
-
The Kelvin Probes (F800/F805) F80518B0002G250 is an advanced measurement tool designed for precision in low-temperature environments. With a versatile temperature range of -45°C to +200°C, this probe offers reliability for various applications in scientific research and industrial use. The specifications highlight a pitch of 2.20 mm (87 mil), making it suitable for detailed measurements where space is limited.
-
Product
Kelvin Clip
BU-78K
-
Kelvin Clip, Gold Plated Brass, 10 Amps, 2.3″ Length, 1/2″ Jaw Opening,
-
Product
Multi-Test Resistivity Measurement System
-
Sheet resistance mapping of thin films with a collinear 4-point probe, Temperature co-efficient of resistance (TCR) of thin films with collinear 4-point probe, Precision temperature co-efficient of resistance (TCR) with 2-point Kelvin probes and precision surface temperature probe, resistor testing with 2-point Kelvin probes,Precision resistor testing with a Kelvin probe card, temperature co-efficient of resistance resistor test (TCR), and Standard TCR test of multiple resistors with Kelvin probes or a probe card.
-
Product
Turret Contactors
-
Design available for all Turret handler models. Leaded and Leadless packages, device pitch down to 0.20mm for Kelvin and Non Kelvin testing on both thermal and ambient environment.
-
Product
Single-Point Kelvin Probe
-
Our Single-Point Kelvin Probe system (KP020) is the introductory system in the KP Technology product family. The off-null signal detection method allows high-quality measurements of the Work Function/Fermi Level of materials.
-
Product
Kelvin Probes F83611S700L535-HMTDf
1167926
-
The F83611S700L535-HMTDf is a precision-engineered double coaxial probe designed for optimal performance in temperature measurements ranging from -45°C to +100°C. This advanced probe ensures reliability with a continuous current rating of 1 A and a low typical contact resistance of only 100 mOhm, making it ideal for various applications where accurate data capture is crucial. With its robust construction featuring brass tips coated in gold, the probe guarantees durability and consistent measurement results.
-
Product
Precision Kelvin Holders
MH-4 Series
-
Integrating Spheres are essential tools for photometricresearch laboratories & lamp / luminaire manufacturers. To derive the best results from Integrating Sphere Photometry, precision lamp holders are necessary.
-
Product
Coaxial Probe (F822) F82205S0007L650IK15
F82205S0007L650IK15
-
The Kelvin Probes (F822) F82205S0007L650IK15 are designed for precision measurements in environments that require a robust and reliable coaxial probe. With a pitch of 5.50 mm (217 mil), these probes are capable of operating in temperatures ranging from -45°C to +200°C, ensuring versatility across various applications. The probes boast a unique IK rating, indicating their resilience against mechanical impacts, making them suitable for demanding operational contexts.
-
Product
Test Fixture, Axial And Radial
16047A
Test Fixture
The 16047A is designed for impedance evaluation of axial/radial lead type devices of up to 13MHz. The 16047A employs Kelvin contacts which realize a wide impedance measurement range. The contact tip can be changed according to the device shape.
-
Product
Kelvin Probe F80001B0001L050M
1037717
-
The Kelvin Probes F80001B0001L050M are precision coaxial probes designed for various high-performance applications. With a pitch of 1.90 mm and a temperature range of -45°C to +100°C, these probes ensure reliability and accuracy in diverse environments. The probes are capable of handling continuous currents up to 2.00 A with a low typical contact resistance of 250 mOhm, making them ideal for sensitive electronic measurements. The probes also excel in high-frequency operations, supporting frequencies up to 3 GHz with a 50-ohm impedance, delivering consistent performance in demanding conditions.
