Product

Broadband Fiber Optic Light Sources

ASE Sources

-

Fibotec Fiberoptics GmbH

ASE Sources - Fibotec Fiberoptics GmbH

Broadband fiber optic light sources utilize amplified spontaneous emission (ASE) within optically pumped rare earth-doped fibers. The spectral width of such light sources can be set by the developer in a range from a few nm to the full width of the emission spectrum of the active ion (e.g. erbium ion).

Product

Optical Power Meter

SAT-4E

-

Shaanxi Aitelong Technology Co., Ltd

SAT-4E - Shaanxi Aitelong Technology Co., Ltd

SAT-4E optical power meter is an indispensable tool to identify fiber, measure fiber loss, verify continuity, and evaluate transmission performance, widely used in LAN, WAN, CATV, remote optical network, etc.

Product

Optical Fiber Identifier

-

OrienTek Optical Technology Ltd.

OrienTek Optical Technology Ltd.

Optocal Fiber Identifier Economical Solution for Integrated Fiber Preparation Tool Demand● 4 easy-change chucks for:bare fiber, patch cords & ribbon fiber● Identifies 3 common test tones● Identifies dominant traffic direction, audible alarm● Approximate core power reading● Low false detection & insertion loss● Very easy to operate● Battery low indication

Product

Optical Fiber Identifiers

-

GAO Tek Inc.

GAO Tek Inc.

Optical fiber identifiers from GAOTek are ruggedly built and easy to use. Using this instrument, detect the presence of signals on optical fibers. For field technicians, fiber identifiers are an important tool. Instantly verify whether live fibers are connected or disconnected, and trace fibers from end to end.

Product

Long Range Straightness Optics

10775A

-

Keysight Technologies

10775A - Keysight Technologies

The Keysight 10775A combines a straightness interferometer and reflector to provide measurements over a range of 1 to 30 meters (3 ft to 100 ft). The optics form a highly-accurate optical straightedge that can measure the straightness of travel of machine-tool and measuring-machine coordinate motions with a resolution of 0.1 micrometer (10 microinch).

Product

PXI Dual 2 x 2 Fibre Optic Mux LC

40-860-422

-

Pickering Interfaces Inc.

40-860-422 - Pickering Interfaces Inc.

Pickering PXI Fiber Optic MEMS Switching cards are available in many high density formats with a choice of 5 different connector styles to suit most applications: FC/APC (for optimal performance), FC/PC and SC/PC for general applications and LC and MU for high density applications. Fiber optic multiplexers create a signal path by redirecting the optical signal into a selected output fiber. This is achieved using Micro-Mechanical Mirrors driven by a highly precise mechanism and activated via an electrical control signal.

Product

High Voltage Optically Isolated Probe, 700 MHz Bandwidth. Includes soft-carrying case.

DL07-ISO

-

Teledyne LeCroy

DL07-ISO - Teledyne LeCroy

The DL-ISO enables highest confidence in GaN and SiC device characterization with highest accuracy, best signal fidelity, and comprehensive connectivity.

Product

HFC 8 Ways Return Path Optical Receiver

HR2080A, HR2080B

-

Hangzhou Huatai Optic Tech. Co., Ltd.

HR2080A, HR2080B - Hangzhou Huatai Optic Tech. Co., Ltd.

HR2080 series HFC 8 ways return path receiver can convert upstream optical signal to RF signal at the head-end and remote control center. 8 independent receivers integrated into a 1RU 19” casing to supply service for HFC network terminal. Receiver's low noise design, -22dBm receive sensitivity can provide service to farther place. There are two versions of this receiver. HR2080A with LCD on the front panel, HR2080B without LCD. All receivers are temperature tolerance type can be installed in any network surroundings including out-door type. Both of these two types can adopt SNMP function which can control the front panel to realize optimization work at the head-end and remote installment.

Product

Optical Light Source

CARY-LS300B

-

UC Instruments, Corp.

CARY-LS300B - UC Instruments, Corp.

The CARY-LS300B optical light source provide 1310/1490/1550 nm three outputwavelengths to meet specific application requirements. It is a idea solution for the fiberoptic network characterization, out-door network construction inspection and lab application.

Product

Optical Transceiver FMC Modules

-

Sundance Multiprocessor Technology Ltd.

Sundance Multiprocessor Technology Ltd.

FMC Modules with Optical Transceivers

Product

Optical Power Measurement Products

-

Keysight Technologies

Keysight Technologies

The Keysight optical power measurement module family provides a range of power sensor modules (8163xA/B), external optical heads (8162xB) controlled by the interface modules (81618A or 81619A) and return loss modules (8161xA).

Product

RS-232 to RS-422/RS-485 Optically Isolated Interface Converter

Model 245

-

Telebyte, Inc.

Model 245 - Telebyte, Inc.

Total Isolation; Selectable RS-422 or RS-485; Selectable 2 or 4 wire RS-485; Intelligent Control of RS-485; TD & RD LED's on Each Side of Opto Barrier; Data Rates up to 128 KBPS. The Model 245 RS-232 to RS-422/RS-485 Optically Isolated Interface Converter is an optically isolated version of the Model 285.

Product

Fiber Optic Sensor Systems

-

Fraunhofer Institute for Telecommunications

Fraunhofer Institute for Telecommunications

Fiber-optic and photonic measuring systems open up innovative measuring and control technology concepts for a wide variety of applications. They play a major role in optimizing energy efficiency and are important technological innovation drivers for new and future-oriented markets.In the Department of Fiber Optic Sensor Systems of the Fraunhofer Heinrich Hertz Institute, the focus of application-oriented research is on the development of a new generation of photonic sensors. These are characterized by extreme miniaturization, high network and communication capability as well as extremely low power consumption or even a self-sufficient power supply.In the Department of Fiber Optic Sensor Systems at the Fraunhofer Heinrich Hertz Institute is focused applied research on the development of a new generation of photonic sensors. These are characterized by extreme miniaturization, high network and communication skills as well as an extremely low power consumption, or even a self-sufficient energy supply.

Product

Automated Optical Inspection Solutions

-

Chroma ATE Inc.

Chroma ATE Inc.

Adjustable criteria for different process application or modelFlexible algorithms programming editor for mono-crystalline and multi-crystalline silicon solar cellsMultiple interface to communicate with manufacturing equipment or information systemVarious defects inspection capability from multilayer LED lighting designFlexible design that can be easily integrated to your in-line printing system and sorting system

Product

Standard Type Externally Modulated Optical Transmitter

HT8500H

-

Hangzhou Huatai Optic Tech. Co., Ltd.

HT8500H - Hangzhou Huatai Optic Tech. Co., Ltd.

1550nm externally modulated optical transmitter is the core equipment in the RFTV network system.RFTV is a unidirectional analogue and digital video broadcast. It adopts high efficiency modulation mode for RF carrier wave and its economy , flexibility and bandwidth validity is beyond comparison of IPTV. By adopting EPON, GEPON or P2P access mode to realize triple-play and FTTx, RFTV broadcasting network in 1550nm optical wavelength still plays an important role.

Product

Optical Protection System ( Double Fiber Two-Way )

OPS-2000

-

Hangzhou Huatai Optic Tech. Co., Ltd.

OPS-2000 - Hangzhou Huatai Optic Tech. Co., Ltd.

OPS-2000 Optics Protection System product series, mainly applies to optical communication field of double fiber two-way for main, light path switching equipment. It makes up from light path switching unit, optical power monitoring unit and network management terminal. In optical communication networks, OPS-2000 real-time monitor the optical power of operating fibers and spare fibers, when monitor the optical light path's optical power is lower than setting switching threshold, it will alarming prompt and switch to the spare fiber to realize the line protection of optical transmission system.

Product

CATV Fiber Optic Transmitter W/ Customer Specified ITU Wavelength

MX- T8500T-HP Series

-

Maxcom Inc.

MX- T8500T-HP Series - Maxcom Inc.

The MX-T8500T-HP series externally modulated transmitter with ITU specified wavelengths delivers high performance signal transmission of NTSC, PAL, digital or compressed digital signals from 50-862 MHz for CATV applications.

Product

Non-contact 3D Optical Profilers

-

Taylor Hobson Ltd

Taylor Hobson Ltd

LuphoScan platforms are interferometric, scanning metrology systems. They are designed to perform ultra precision non-contact 3D form measurements mainly of rotationally symmetric surfaces such as aspheric lenses.

Product

Rolling Seal 4 Optical Connector

RS4

-

Teledyne Marine ODI

RS4 - Teledyne Marine ODI

- ​GAF/ELI enhances mating efficiency and eliminates potential for shell damage while offering positive latch indication.- Longer, contoured cable end lead-in bushing enhances fine alignment of connector halves during the mating sequence.- Reduced channel count to align with more efficient field architectures.

Product

Optical Tachometers

-

PeakTech Prüf- und Messtechnik GmbH

PeakTech Prüf- und Messtechnik GmbH

Enables fast and accurate contactless measurement of the rotation per minute and the surface speed of rotating objects.

Product

Optics Testing Systems

SHSInspect

-

Micro-Epsilon Group

SHSInspect - Micro-Epsilon Group

SHSInspect instruments are widely used in R&D and production when performance, reliability and efficiency counts most. Based on the state-of-the-art wavefront sensor SHSLab, Optocraft offers measurement modules, turnkey instruments and automated tools for a great variety of applications in the field of optics and optical systems, such as:*objective lens testing*testing of optical elements and windows*surface shape measurement*inline measurement and automation

Product

12-bit, 200KHz, 16SE/8DIFF Isolated AI, 4 12-bit AO, 8 Optically Isolated Dig. I/O, 24V, 24 TTL I/O

APCI-3110-16

-

TEAM SOLUTIONS, INC.

APCI-3110-16 - TEAM SOLUTIONS, INC.

The APCI-3110 is a 12-bit multifunction board for 3.3 V and 5 V PCI systems, with optical isolation up to 1000 V and a high throughput rate of 200 kHz. The PCI board has additional types of conversion: Sequence RAM, Auto Refresh, scan, timer or external event.Furthermore, the board has a PCI DMA, 2 watchdogs, 4 digital inputs and 4 digital outputs. Sensors, which allow to supply current signals instead of voltage signals, also can be acquired with the APCI-3110, as this board offers up to 16 current inputs. The board is protected against overvoltage and input filter and it is protected against high frequency emmission. With the free calibration tool you can do the fine adjustment on-site.