Filter Results By:
Products
Applications
Manufacturers
-
product
Automated Wafer Handler up to 450mm
GPR-GB7S
The GB7S Robot System employs Genmark’s breakthrough and patented GPR™ Technology to achieve the highest level of performance currently available in an automated wafer handler which is capable of handling up to 450mm diameter wafers. The patented GPR technology enables the servo-controlled robot to interface compliantly and intelligently with misaligned cassettes, FOUPS and process modules, as well as provide software-controlled end-effector deflection compensation during transport of heavier payloads. The unique and patented YAW technology feature of the GPR-GB7S Robot System enables it to access in-line process modules, FOUPS and cassettes from a fixed centralized location, and eliminates the need for radial placement of process and other stations around the robot. The GB7 Robot System can have various arm configurations to accommodate a wide range of SMIF/cassettes front-end layouts.
-
product
Wafer Level Test Handler
Kronos
Wafer level test handler for 6/9DOF sensors with real stimulus. Very high UPH capacity and the lowest cost of test (COT). KRONOS is one of the only wafer level test solutions for motion sensors with real stimulus.
-
product
Wafer Bonder
AML
Wafer bonding has found many applications in the field of MST, MEMS and micro engineering. These include the fabrication of pressure sensors, accelerometers, micro-pumps and other fluid handling devices. The process is also used for first-order packaging of silicon microstructures to isolate package-induced stresses. The OAI AML Wafer Bonder facilitates both the alignment and bonding to be performed in-situ, in a high vacuum chamber. For anodic bonding the wafers are loaded cold and heated in the process chamber. For high accuracy alignment the wafers are aligned and brought into contact only after the process temperature has been reached, thus avoiding differential thermal expansion effects which can compromise alignment. The AML Wafer Bonder is excellent for anodic bonding, silicon direct and thermal compression bonding applications. These features enable the bonder to be used with virtually any processing tool.
-
-
product
Test Handlers
Boston Semi Equipment test handlers are designed for optimum production performance on your test floor.
-
product
Test Handler
M4171
Advantest’s M4171 single-site handler combines these capabilities in a portable design that is ideally suited for use in engineering environments.
-
product
Wafer Prober
Precio octo
200mm wafer prober. The system adapts ultra-high speed indexing and high-speed wafer exchange functions to reduce test cost and improve overall equipment effectiveness (OEE) markedly enhancing productivity.
-
product
Test Handlers
Cohu has 50+ years of semiconductor test expertise designing and manufacturing pick-and-place, gravity feed, test-in-strip handlers, MEMS test cells, and turret-based test handling and back-end finishing equipment for ICs, LEDs and discrete components.Our test handlers support a variety of package sizes and device types, including automotive, mobile, power, micro-electromechanical systems (MEMS) and microcontrollers, among others.
-
product
Test Handler
M4841
High-Throughput Device Handler for Volume Production Testing of MCUs and DSPs.
-
product
Test Handler
HA1200
The new HA1200 handler can be linked with a tester to utilize our unique active thermal control technology for testing singulated and/or partially assembled dies. This technology enables testing of powerful high-end SoCs with 100% test coverage. This helps reduce yield loss at final test, thus reducing losses of final multi-die assembled products.
-
product
In-Line / Board Handler
Circuit Check’s in-line board handler fixturing exceed the high performance requirements associated with high-volume production. Circuit Check supports in-line fixturing for all the leading ICT handlers including Keysight 5i, Teradyne TSh Multi-Site, IPTE and Pematech. Circuit Check is the go-to partner for in-line functional test fixtures to speed production throughput.
-
product
Wafer Analyzer
RAMANdrive
RAMANdrive is the specialized Raman microscope for wafer analysis equipped with our dedicated 300 mm stage. RAMANdrive gives you an ultra-fast, highest resolution analysis of the whole wafer with unique stability and accuracy
-
product
Wafer Probers
Full Automatic Wafer Prober. Semi Automatic Wafer Prober. High Current Probe Block. 6-inch Manual Prober. 8-inch Manual Prober. 12-inch Manual Prober.
-
product
Test Handler
JOT M5
Simple, cost-effective way to automate PCB and pallet based testingSafe, reliable product handlingQuick-adjust ease: no product-specific partsFaster handling of smart productsIndustry 4.0 autonomous interconnectivityTruly scalable for growing test needsReusable, application-specific test boxesM-TestBoxes compatible with M1 handlerBoxes are fully independent, just pull out from M5 rack and use in off-line testingFail product separation to integrated magazineSpacious service-friendly constructionErgonomic workspaceTouchscreen UI with base statistics and service capabilityEasy start-stop operabilityAutomated width adjustment
-
product
Automated Test Handler
In-Line Duomax
100 % Automated Fixture Change1.5 N x 8000 Test PointsICT FCT EOL IntegrationHigh ProductivityHigh QualityGreat ROINo PLC
-
product
Single Site Test Handler
3210
Chroma Single Site Test Handler 3210 supports various package types such as BGA series, QFP series, QFN, TSOP, and more. The handler is primarily designed for early device design and engineering validation.
-
-
product
Automated Fiber Handler
1200
The 1200 Automated Fiber Handler is the first fiber preparation product that enables optical fiber manufacturers to significantly reduce the cost of production measurements by automating the critical optical fiber stripping, cleaning, cleaving and temporary coupling processes.
-
product
Turret Test And Scan Handlers
Turret platforms for semiconductor test, inspection and packaging.
-
product
Tri-Temp Octal Sites Handler
3160-C
Chroma 3160-C is a productive pick & place system for high volume multi-site IC testing.
-
product
Logic Test Handler
M620
- Maximized Productivity- Handles various device size- Short conversion time- Easy mantenance- Minimized footprint
-
product
Equipment Front End Module Wafer Handler
Sigma EFEM
Integration transforms the bond tester into a fully automated system. We offer various types of EFEM (Equipment Front End Module) wafer handlers, to combine with a Sigma W12 for operator-free bond testing.
-
product
Octal Test Site Handler
3180
The Chroma 3180 is a productive pick & place system for high-volume multi-site IC testing.
-
product
System to Handle Wafer Levels
AMI AW Series
Operator-Free Wafer Inspection, Analysis and Sorting The AW Series are advanced high-capacity, high throughput automated wafer C-SAM® instruments specialized to deliver maximum sensitivity for the evaluation of wafer and device level applications.
-
product
Wafer Bonding Systems
ith over 15 years experience in designing and manufacturing precision wafer bonding equipment, EVG wafer bonding systems are well recognized in setting industry standards for the MEMS production industry. Besides supporting wafer level and advanced packaging, 3D interconnects and MEMS fabrication, the EVG500 series wafer bonding systems can be configured for R&D, pilot-line or volume production. They accommodate the most demanding applications by bonding under high vacuum, precisely controlled fine vacuum, temperature or high pressure conditions. Multiple bonding methods including anodic, thermo compression, glass-frit, epoxy, UV and fusion bonding are covered. Based on a unique modular bond chamber design the EVG500 series allow for an easy technology transfer from R&D to high volume production.
-
product
Test Handler
M4872
Improve Efficiency in High-Volume Manufacturing and Device Characterization.
-
product
MEMS Handler
4664-IH
The ULTRA P is a high performance production handler that provides thermal conditioning, full 6 DOF mechanical stimulus and an electrical ATE signal path for testing Micro-Electro-Mechanical Systems (MEMS) Accelerometers and Gyroscopes.
-
product
In-situ Wafer Temperature Monitoring
CI Semi's family of noncontact temperature monitors (the NTM line), offers high end pyrometry products for the measurement of wafer temperatures during process. CI Semi’s flag ship of the line, the NTM Delta, incorporates real-time, same point emissivity measurement and compensation making it the ideal solution for in situ monitoring for processes such as RTP, CVD and PVD. The NTM family is sold to leading tool manufacturers.
-
product
Wafer Demounting And Cleaning Machines
Demounting and cleaning to high throughput fully automatic ingot after cutting in the slicing machine and wire saw.
-
product
High-Throughput Film Frame Handler
MCT FH-1200
FH-1200™ film frame test handler is designed to handle leadless devices mounted on film frame, such as QFN, DFN, WLCSP, BGA, µBGA and eWLB packages. The FH-1200 enables high parallelism testing of post-saw IC devices at ambient temperature. It can accommodate 200 mm and 300 mm wafer rings and custom shapes onto which multiple strips can be mounted. No change kits are required regardless of package size (if same frame is used).
