Antenna Software
See Also: Antennas, Broadband Antennas, Log Periodic Antennas, Directional Antennas, HF Antennas, Biconical Antennas, Horn Antennas, Isotropic Antennas, Loop Antennas, Antenna Analyzers, Dipole Antennas
-
product
Conformance Testing Software
Clarinet-TTCN VOIP Interworking ETS
Protocol: ITU-T H.225 (11/2000) H.323 (11/2000) and ITU-T Recommendation Q.784.2 (1997)IUT: H323-ISUP gatewayATS: Based on H246 standard of ITU-T written by ACACIA .
-
product
MagScope Software
MagScope is Magcam's advanced data analysis software formeasuring and analyzing magnetic field distributions.MagScope is designed to extract as much informationas possible from the measurement data. MagScope is integrated in and optimized for all our magnetic field cameras and scanners.
-
product
Value-added Module With 4 Antenna Openings And 2 Full-size Rev. 1.2 PCI Express Mini Card Slots
VAM600
*4 Antenna openings*Swappable modular design*Maximize I/O flexibility*Designed for tBOX300/500 series*LVD, FCC and EN 50155 certified; CE compliant
-
product
Antenna, Log Periodic
EM-6947 | 200 MHz – 5 GHz
The EM-6947 is an ultra-wide bandwidth log periodic dipole array aimed at applications requiring consistent performance over a very wide frequency range. Capable of both receiving and moderate power level transmitting, the EM-6947 can take the place of two or more conventional antennas, allowing you to take full advantage of the tuning range capabilities of modern receiver and spectrum analyzer designs with less inconvenience caused by the need to switch antennas.
-
product
Arbitrary Waveform Generator Software
SourceXpress
PC-based software for arbitrary waveform generator control & emulation. From your PC, create waveforms using tools specifically targeted for your needs. From your PC, control one or many source instruments such as the AWG70000s. Control one or several AWG70000 instruments from one application. Load and play waveforms remotely. There is no new application to learn! SourceXpress™ has the same look and feel as the AWG70000 instruments.
-
product
Software Options
Sonix offers powerful wafer software tools to enhance bonded wafer imaging, accelerate production and adapt AutoWafer and AutoWafer Pro to our customers’ specific requirements.
-
product
Field Balancing Software
DS-0227A
The trouble of rotation machinery is caused most frequently by unbalanced phenomenon of rotating shaft. However, balancing correction on-site is not easy because the conventional vector calculation method with drawing needs quite some time.
-
product
Phased Array Corrosion Mapping Software
Concerto
Concerto is a UT acquisition and analysis software specially designed for Phased Array corrosion mapping. For the tough field conditions that operators deal with Concerto features no menu, less than 18 icons, and few controls so that operators can easily work and not be bothered by complex GUIs. Concerto is simple and easy to work with yet WT, Surface, and back wall C-scan can still be analyzed and setting can be changed using the same acquired data.
-
product
Automatic Antenna Tuner
Automatic Antenna Tuner has not been released for full Beta testing and production yet as we are solving some firmware issues. We cannot give you a date nor estimate at this time when full production will commence.
-
product
Microscopy Image Analysis Software
analySIS FIVE
The image analysis software "analySIS FIVE" is designed for users of industrial microscopes compatible with digital cameras for microscopes. Users can select from 5 types depending on their required functions, such as "measurement," "database," "report creation," and "particle analysis."
-
product
USRP Software Defined Radio Stand-Alone Device
The USRP Software Defined Radio Stand-Alone Device consists of an onboard processor, FPGA, and RF front end. You can program this device using either LabVIEW Communications System Design Suite or an open-source software workflow, depending on the operating system you choose. You can provision the device with NI Linux Real-Time, Linux Fedora, or Linux Ubuntu real-time operating systems. The USRP Software Defined Radio Stand-Alone Device enables you to prototype a range of advanced research applications such as stand-alone LTE or 802.11 device emulation; Medium Access Control (MAC) algorithm development; multiple input, multiple output (MIMO); heterogeneous networks; LTE relaying; RF compressive sampling; spectrum sensing; cognitive radio; beamforming; and direction finding.The registered trademark Linux® is used pursuant to a sublicense from LMI, the exclusive licensee of Linus Torvalds, owner of the mark on a worldwide basis.
-
product
Antenna, Tactical, Log Periodic
EM-6942 | 400 MHz – 4 GHz
The EM-6942 is designed for harsh environmental conditions and its folding elements and 2-section design simplifies transport and storage. The antenna can be mounted on a tripod or any ¼-20 mount and be positioned for horizontal or vertical polarization.
-
product
Sequence Creation Software for Power Supplies and Electronic Loads
Wavy Series
WAVY is sequence creation software that supports the power supplies and electronic loads from KIKUSUI Electronics Corp.
-
product
Test Software
Includes everything a test engineer needs to fully characterize his transistors from 10MHz to 110GHz in power and noise.
-
product
Software
TDAS Control
Diversified Technical Systems, Inc.
TDAS Control is the original set-up, control, viewing and export software developed by DTS. TDAS Control provides easy-to-use tools for configuring output timing, as well as advanced features such as automatic sensor assignment, detailed channel diagnostics, real-time display and squib fire for airbag testing. TDAS Control only works with TDAS G5 and TDAS PRO.
-
product
Active Loop Antenna
AL-130R
Also known as Magnetic Loop Antenna, the AL-130R is compliant with CISPR 16-1-4. It is ideal for emissions measurements as required by various EMC standards such as FCC 18, CISPR 11, CISPR 13, CISPR 14, CISPR 32 and many more. The built-in, low-noise preamplifier, increases overall measurement sensitivity as well as the overall signal to noise ratio. As per ANSI C63.4-2014, the use of active loop antenna for compliance testing is permitted in a non-sheilded environment ONLY if the saturation indicator is continuously monitored during the course of testing. Com-Power’s Remote Antenna Interface (RAI-100) comes in very handy for this application. It is a compact controller which can be used to enable/ disable RF measurement circuit and monitor saturation and battery low conditions remotely via a fiber optic cable up to 30 mtrs in length.
-
product
Software Test Automation Solution
ZAPTEST
ZAPTEST is a software test automation solution for testing Mobile; Web; Desktop applications Cross-Platform. ZAPTEST allows testing of any GUI based software on any modern OS, mobile or conventional including iOS; Android; WinMo; Blackberry; Windows; Mac; and Linux, and supports testing of Agile and CI development.
-
product
Real-time Signal & System Analsis Software
WinAudioMLS
WinAudioMLS is a professional Windows application for powerful real-time signal and system analysis.WinAudioMLS converts your PC with a soundcard into a professional audio and signal analyzer.
-
product
Seismic interpretation Software Winsism
Winsism
WinSism enables all typical operations for refraction processing including: first break picking, trace phantoming, true velocity, velocity computation, intercept time method, delay method, GRM method. It can also import all usual seismic file format as well as export in raster or vector output.
-
product
Development Software Suite
JTAG ProVision
The JTAG ProVision software suite is used to generate boundary-scan tests and in-system programming applications for assembled PCBs and systems. This professional development tool is fully automated and supports the import of design data from over 30 different EDA and CAM systems. Other key data inputs are JTAG device BSDL models and a large, well-maintained model library describing thousands of non-JTAG devices.
-
-
-
product
MIPI M-PHY V5.0 Receiver Test Software (Frame Generator)
N5991MM5E
Generate MIPI M-PHY 5.0 sequences and signaling at HS-GEAR5 and lower speeds, for debugging, troubleshooting, and conformance test purposes, using the N5991MM5E Frame Generator software, for the M8040A BERT platform.
-
product
3D Inspection Software
Metrolog X4
Metrolog X4 architecture is designed not only to benefit from current computer and OS technologies (Windows 64-bit, and multiprocessor PCs) that significantly increase the performances and throughput of your Metrology software, but is also aimed at simplifying your day-to-day measurement work. Metrolog X4 is a perfect Point Cloud software able to analyze large data size. High Performances in Point Cloud analysis: Large Data file import (CAD files, Point clouds, ...)
-
product
Software
Software for developing, testing, and troubleshootingSoftware upgrades enable faster production, reduce errors, improve precision, and give engineers the time and headspace they need to innovate.
-
product
CMM Software
CAMIO
Proven in the most challenging application environments CAMIO is the CMM software of choice for many of the world’s largest manufacturers. By leveraging the productivity benefits of CAMIO, manufacturers can focus on accelerating lead times and improving product quality while reducing costs. CAMIO’s interoperability across CMM platforms, sensor technology and manufacturing sites, is a unique advantage which guarantees the sustainability of your investment in software and inspection program
-
product
Fluke DAQ 6.0 Application Software
Fluke DAQ 6.0 is a powerful, versatile data acquisition application that provides effortless configuration, data logging, and analysis for the 2680A and 2645A NetDAQ Networked Data Acquisition Unit » and 2680 Series Data Acquisition Systems », plus adds support for the Fluke 2638A Hydra Series III Data Acquisition System/Digital Multimeter » and Fluke Calibration 1586A Super-DAQ Precision Temperature Scanner ».
-
product
Cassegrain Antennas
In telecommunications and radar, a Cassegrain antenna is a parabolic antenna in which the feed antenna is mounted at or behind the surface of the concave main parabolic reflector dish and is aimed at a smaller convex secondary reflector suspended in front of the primary reflector. The beam of radio waves from the feed illuminates the secondary reflector, which reflects it back to the main reflector dish, which reflects it forward again to form the desired beam. The Cassegrain design is widely used in parabolic antennas, particularly in large antennas such as those in satellite ground stations, radio telescopes, and communication satellites.
-
product
8 Direction Receiving Loops Antenna System
AS-SAL-12/20/30 - Mark II
The Array Solutions Shared Apex Loop™ Array (AS-SAL-12 Mark II, AS-SAL-20 Mark II, and AS-SAL-30 – Mark II) is an improved version of the new type of receiving antenna that delivers exceptional directivity in a compact package and is useable over a wide range of frequencies without need for adjustment. This array opens the door to a new class of compact, high performance, wideband receiving antennasdeveloped for both amateur and professional users.
-
product
Distributed Active Testing & Troubleshooting Software
DVQattest
DVQattest® is a high performance active test and troubleshooting application for proactive management of VoIP/VoLTE, IP Videoconferencing, web, email and other network services and applications. Its compact software test agents run unobtrusively on VMs, routers, servers, PCs, and mobile devices, providing in-depth analysis of voice, video and data performance anywhere in the network at any time.
