Kelvin Clips
A spring clip where the jaws are insulated from each other at the hinge point. 4-wire
See Also: Clips, Alligator Clips, DIP Clips, IC Clips, Test Clips
-
Product
Kelvin Probes (F835) F83511B0003G120
1028639
-
The Kelvin Probes (F835) model F83511B0003G120 is engineered for precision measurements in the temperature range of -45°C to +100°C, making it a versatile tool for various applications. Its compact design features a pitch of 3.50 mm, ensuring tight integration in electronic devices. This model showcases exceptional electrical specifications with a continuous current of 10 A and a low typical contact resistance of 20 mOhm, which facilitates efficient signal transmission. It supports operating frequencies up to 2 GHz while maintaining a typical impedance of 50 Ohm, thus demonstrating its capability for high-frequency applications.
-
Product
Kelvin Probes (F832) F83239S0001L650
1000766
-
The Kelvin Probes (F832) F83239S0001L650 are precision-engineered coaxial probes designed for high-performance applications in temperature measurement and electrical connectivity. With a temperature range of -45°C to +200°C, these probes offer exceptional reliability and precision, making them ideal for a variety of demanding environments. The model F832 features a compact design with a pitch of 5.50 mm and a total length of 31.00 mm, allowing for easy integration into tight spaces.
-
Product
Kelvin Probes (F822) F82203S0003L650
1017248
-
The Kelvin Probes (F822) F82203S0003L650 are designed for precision measurements in a variety of applications, seamlessly integrating robust engineering with advanced design principles. These coaxial probes ensure reliable performance under extreme temperatures ranging from -45°C to +200°C, making them an ideal choice for demanding testing environments. With a pitch of 5.50 mm (217 mil), they facilitate efficient connectivity and signal transfer between components, ensuring that even fine measurements remain accurate and consistent.
-
-
Product
BtoB Clip Connectors
-
BtoB clips are durable solutions that significantly reduce total cost of jig maintenance by using a high quality probe without using the connector on the other side.
-
Product
Crocodile Clip Set
142-4
-
Large crocodile clips designed to hold fast while taking diagnostic measurements. This is the perfect complement to your testing arsenal - compatible with Electronic Specialties 142-1. These clips are CATIII 1000V safety rated and capable of measuring up to 10 amps. These are high quality clips and the Multi-Purpose tooth pattern provides plenty of holding power. These clips have a very wide jaw opening and are capable of clamping to your typical battery post. These are sold in a set of 2, one red and one black clip. Test with confidence.
-
Product
Kelvin Test Contactor
cCompact
-
cCompact™ test contactor offers a reduced site-to-site pitch concept enables high parallel test for power applications on strip test and pick and place handler platforms.Featuring compact Kelvin footprint with outstanding CRES stability by Denmark pin material. Automotive temperature range -60°C to +175°C. Integrated Socket Air-distribution.
-
Product
Kelvin Probes (F822) H832KBAT
1107999
-
The Kelvin Probes (F822) H832KBAT is a high-precision measurement tool designed for various industrial applications. With a pitch of 5.50 mm (217 mil), this probe is engineered to deliver accurate readings while ensuring durability and reliability. Its internal thread specification of 4.0X0.5 and flux-proof connection type (plug) enhance its functionality, making it suitable for various environments where precision is crucial.
-
Product
Kelvin Probes (F810) F81016S040L230S1
1024032
-
The Kelvin Probes (F810) F81016S040L230S1 is an exceptional coaxial probe designed for precision measurements across a temperature range of -45°C to +100°C. Built with a meticulous engineering focus, this product is not only reliable but also boasts a compact design with a pitch of 2.54 mm (100 mil). This probe excels in environments requiring durable and high-quality performance, supported by additional specifications that highlight its range of applications in the industry.
-
Product
Kelvin Probe Set
11059A
Accessory Kit
Reduce ground-related errors and contact resistance through gold-plated flat tweezers and special gripping surfaces
-
Product
PTFE Platinum Sheet Electrode Clip
FPE1
-
PTFE platinum sheet electrode clip designed for securely holding flat working electrodes during electrochemical experiments. Compatible with platinum sheets, carbon paper, carbon cloth, ITO glass, and other flat electrode substrates. Manufactured from chemically resistant PTFE with a platinum contact, providing reliable electrical conductivity for electrocatalysis, corrosion studies, battery research, and laboratory applications.
-
Product
1 N Clip Grips
-
These very low force 1 N (0.22 lbf) clip grips are for tensile testing fibers, tapes, and other similar shaped specimens. They are designed for use with 50 N (11 lbf) and below load cells.
-
Product
Probe Tip Ground Lead with Alligator Clip
PK007-025
-
Probe Tip Ground Lead with Alligator Clip.
-
Product
Off-Set Kelvin Test Sockets
-
This is an innovative and robust contact technology for making Kelvin contact to 0.5mm pitch QFNs. The contact uses a tip that is angled to one side, matched to an orientation that's flat on the tip. Two such contacts placed in opposition will touch the pad within 0.125mm. And because the tip is offset, the probe diameter is a robust 0.39mm and the load board pad pitch remains 0.5mm.
-
-
Product
Kelvin Probes H810
1001862
-
The H810 Kelvin Probe is a high-performance tool meticulously designed for precise electrical measurements in various technical applications. With a sleek brass tube construction, it promises durability and reliability, ensuring that it meets the demands of both professionals and hobbyists alike. This specific model is optimized for superior performance, featuring a continuous current capacity of 3.00 A, which allows it to handle rigorous tasks efficiently.
-
Product
Kelvin Test Contactor
ecoAmp
-
ecoAmp™ Kelvin test contactor has a durable monolithic pin design with low and stable contact resistance. It is a high-power cantilever kelvin contactor with a patented spring and tip design for optimum heat dissipation. This ensures best reliability, long spring life and high yield even under highest current and temperature requirements. Featuring extended Automotive temperature range -60 ̊C to +175 ̊C, capable to stand thermal stress during high-power test. The contact motion is decoupled from the test board.
-
Product
Kelvin Probes (F835) F83516B0001G410
F83516B0001G410
-
The Kelvin Probes model F835 (Order code: F83516B0001G410) is engineered to deliver reliable and precise measurement capabilities across a broad temperature range of -45°C to +100°C. With a pitch of just 3.50 mm (138 mil), these probes are designed for high-density applications, ensuring optimal performance even in challenging environments. The F835 offers impressive electrical specifications, including a continuous current rating of 10 A and a typical contact resistance of only 20 mOhm, providing excellent conductivity and stability for a variety of measurement tasks.
-
Product
Kelvin Probes (F800/F805) F80518B0002G250
1031155
-
The Kelvin Probes (F800/F805) F80518B0002G250 is an advanced measurement tool designed for precision in low-temperature environments. With a versatile temperature range of -45°C to +200°C, this probe offers reliability for various applications in scientific research and industrial use. The specifications highlight a pitch of 2.20 mm (87 mil), making it suitable for detailed measurements where space is limited.
-
Product
Kelvin Test Contactor/Probe HEad
cPython
-
cPython™ Kelvin contactors and probe heads provide superior electrical and thermal performance with significant cost savings. This makes cPython Kelvin ideal for lab and high-volume production test of analog and mixed signal integrated circuits – for applications such as power control, A-D and D-A converters, audio, video, power amplifiers, photonics, optical MEMS and sensors.cPython Kelvin probes are electrically isolated and mechanically independent force and sense paths for true Kelvin contact for taking accurate measurements, even under high current conditions. These robust probes provide hundreds of thousands of insertions or touchdowns, and a bandwidth up to 26 GHz.
-
-
Product
Bed of Nails Test Clips
142-2
-
These multi-purpose test clips are a great way to tap live readings. Unique micro pins cause less damage, should you decide to pierce the wire's insulation.
-
Product
Kelvin Probes (F822) F82205S0007L650IK25
1009720
-
The Kelvin Probes (F822) F82205S0007L650IK25 is an essential coaxial probe designed for precise electrical and mechanical applications. With a pitch of 5.50 mm, this probe operates effectively in temperature conditions ranging from -45°C to +200°C, ensuring reliability in various environments. It is built to handle continuous currents of up to 6 A and features a typical contact resistance of 60 mOhm, making it suitable for high-frequency applications with an impedance of 50 Ohm and a frequency range of up to 1.2 GHz.
-
Product
Kelvin Contact Spring Probes
-
We have spring probes for Kelvin contact, which best suits to use for sensitive and extremely precise test. It is used by contacting to one terminal of semiconductor by two probes. We have 0.3, 0.4 and 0.5mm pitch probe for Kelvin contact.
-
-
Product
Dual-Head Alligator Clip Leads (10A/20A)
DHA-1
-
Dual-head alligator clip test leads for electrochemical cells, laboratory instruments, power supplies, and general electrical connections. Available in multiple colors and cable lengths, with 10A and 20A current ratings.
-
Product
PLCC Clips & Socket Plugs
-
Ironwood’s family of clips and plugs for PLCC packages can be used for connecting PCBs together or for gaining access to signals for testing.
-
Product
Kelvin Probes (F822) F82205S0001L650
1003343
-
The Kelvin Probes (F822) F82205S0001L650 are advanced coaxial probes designed for precision in both electrical and mechanical applications. These probes are built to withstand extreme conditions, with a temperature range of -45°C to +200°C, making them suitable for a variety of environments. Their robust design features a continuous current rating of up to 6.00A and a contact resistance as low as 60mOhm, ensuring minimal signal loss and high reliability during operation. The F822 series is fortified with materials such as beryllium copper for the plunger and bronze for the barrel, all crafted to enhance durability and performance.
-
Product
Ultra-High Vacuum Kelvin Probe
-
Our Ultra-high Vacuum Kelvin Probes give the user full access to work function and contact potential difference (CPD) measurements under vacuum. Each system comes with a high-quality, manual, or motorized translator that enables reliable and accurate tip-to-sample positioning, and the unrivalled tracking system always holds the tip separation constant during the measurement. Even under vacuum, the work function resolution is 1 - 3 meV.
-
Product
PEEK & PTFE Glassy Carbon Electrode Clip
GCC1
-
GCC1 PEEK and PTFE glassy carbon electrode clips provide stable electrical contact for straight and L-shaped glassy carbon electrodes. Available in PTFE, PEEK-S01, PEEK-S02, and L-shaped designs for standard and small-volume electrochemical cells.
