Product

8 Channel 1GHz High Frequency for SBDT Relay Module

DP-cPCI-4158

-

Data Patterns Pvt. Ltd.

DP-cPCI-4158 - Data Patterns Pvt. Ltd.

DP-cPCI-4158 is a 8 channel high frequency SPDT relay module. It provides for 1000V DC isolation between channels. This module is constructed using SPDT relays.

Product

Standard - 6.00 (170.00) - 14.00 (397.00) Feed Through Probe

P2447-1W

-

ECT

P2447-1W - ECT

Current Rating (Amps): 20Average DC Resistance lower than (mOhm): 10Test Center (mil): 225Test Center (mm): 5.72Full Travel (mil): 300Full Travel (mm): 7.62Recommended Travel (mil): 200Recommended Travel (mm): 5.08Overall Length (mil): 1,145Overall Length (mm): 29.08

Product

Dual Frequency 900 kHz & 2250 kHz 2D Imaging Sonar

BlueView M900-2250-S 130/45-Mk2

-

Teledyne Marine BlueView

BlueView M900-2250-S 130/45-Mk2 - Teledyne Marine BlueView

​The dual frequency M900/2250-S 130/45-Mk2 is a new configuration of the leading BlueView M900/2250 optimized for superb image quality in challenging shallow water environments. The 900 kHz offers high-resolution long range navigation, object detection, and obstacle avoidance, while the 2250 kHz provides ultra-high resolution at close range. ROV navigation, diver hand held, hull inspections, structure inspections, diver monitoring, and search and recovery are a few applications that benefit from the dual-frequency’s imaging capabilities. All M Series sonar operate while in motion or from a stationary position delivering real-time imagery and data.

Product

Frequency Counter

1210

-

Topward

1210 - Topward

0.1Hz to 100MHz

Product

SiTek Standard PSD

1L20_CP3

-

SiTek Electro Optics AB

1L20_CP3 - SiTek Electro Optics AB

The SiTek Standard PSD (Position Sensing Detector) has high resolution, fast response and outstanding linearity. It is used in a wide variety of applications, most of them utilizing light sources in the visible or near-infrared part of the spectrum. The spectral range covers the region 400 - 1100 nm. Thanks to SiTek's proprietary AR-coating, optimized around 860 nm, a reflection loss of only 2% is achieved around the responsivity peak. Most of the detectors have a cover window to avoid handling damages.

Product

Frequency Multipliers

-

Kuhne electronic GmbH

Kuhne electronic GmbH

The Kuhne electronic Frequency Multipliers can be characterized by a high band width, a very good suppression of fundamental and harmonic waves, a small current consumption and a very compact housing.

Product

Standard Products

-

Santa Barbara Infrared, Inc.

Santa Barbara Infrared, Inc.

SBIR offers an extensive line of reliable, high performance test equipment used to characterize and calibrate IR, Visible and Laser systems. Products include blackbodies, visible sources, target wheels, targets, collimators, target projectors, laser test modules/systems and IRWindows™ software for automated testing. These modular, cost effective instruments are user-friendly and easily integrated into automated test systems. For more information, including printable data sheets, select a product from the list.

Product

Standard Ground Lead for PP0x7 Series

PK007-002

-

Teledyne LeCroy

PK007-002 - Teledyne LeCroy

Standard ground lead for PP0x7 Series

Product

Time & Frequency System

TM-4M

-

Spectrum Instruments, Inc.

TM-4M - Spectrum Instruments, Inc.

The TM-4M Time & Frequency System features a larger, easier to use form-factor. It was designed for mobile applications that require uninterruptible power, and for applications that require multiple front panel connections. The six BNC jacks on the front panel are user-assignable to output any signal the user chooses.

Product

Frequency Converters

-

Ducommun Inc

Ducommun Inc

Ducommun's frequency converter families include waveguide detectors (FAS), passive and active multipliers (FMP and FMA), up and down converters (FUB and FDB), harmonic mixers (FDH), subharmonically pumped up and down converters (FUS and FDS) and phase detectors and single sideband modulators (FPB and FSS). These devices are offered in 7 waveguide bands to cover entire 18 to 110 GHz frequency spectrum. These converters employ high performance GaAs Schottky beamlead diodes and DLT's proprietary circuit configuration to produce superior performance, such as low conversion loss and up to full waveguide instantaneous operation bandwidth.

Product

High Frequency Current Transformers

-

Osborne Transformer Corp.

Osborne Transformer Corp.

Osborne High Frequency Current Transformers operate at frequencies higher than 50/60 Hertz. Their purpose is to reduce high frequency system currents to lower values that are appropriate for instrumentation and/or protection circuits. They have been designed to meet specified current ratios, and burden impedance at a specified transformation error. One area of unique Osborne expertise is in designing for phase shift when high frequency current transformers are to be used for power measuring applications.

Product

Frequency Synthesizers 50 MHz to 21 GHz

Luxyn Model MLVS-0520

-

Micro Lambda Wireless, Inc.

Luxyn Model MLVS-0520 - Micro Lambda Wireless, Inc.

Lyxyn synthesizers are ideal main local oscillators in Receiving Systems, Frequency Converters and Test & Measurement Equipment. MLVS-0520 is VCO-based and provides 0.001 Hz frequency resolution over the 50 MHz to 21 GHz frequency range. Output power level of +15 dBm is provided throughout the full frequency range. Full band switching speed is 50 μsec maximum. The MLVS-0520 is 4” x 3.6” x 0.94” high.

Product

Calibrated Leak Standards

-

LeakMaster

LeakMaster

LeakMaster is a leader in the industry when it comes to the manufacturing of calibrated leak standards  (calibrated leak orifices). Each leak standard is meticulously manufactured to a specific leak or flow rate at a predetermined pressure. The purpose of each leak standard is to teach, or calibrate a leak test program, and allow the leak test instrument to memorize the characteristics of a leaking part. These leaks are also introduced into production parts to simulate a “leaking or failed” part condition. LeakMaster supplies a calibrated leak standard with every leak test instrument, and provides recertification services for all of their leak standards

Product

Standard VXI Module Shield Kits With Address Switch Opening

-

ICS Electronics

ICS Electronics

* Single-slot kit fits all VXI-1 Revision 1.0 to Revision 3.0 chassis.* Clamshell design fits C-size modules with 96-pin connectors.* Side shields include connector shrouds for maximum shielding.* RFI limiting, air vent slots along top and bottom edges for good air circulation thru the module.* Extruded front panel is bend resistant.* Address switch opening on component side shield.* Complimentary layout support includes PCB design template and CAD layout files.

Product

Standard Digital Isolators

-

Analog Devices Inc.

Analog Devices Inc.

Analog Devices’ digital isolators enable designers to implement robust solutions with our magnetically isolated iCoupler products with the flexibility of up to 6 channels. Products meet stringent safety standards including the ability to isolate IS-IS with our intrinsically safe certified digital isolators which enable designs in hazardous areas. And automotive certified versions are also available. Utilizing the iCoupler® and isoPower® technologies, these isolation solutions enable designs without the constraints found in optocouplers.

Product

Suitable for Thermocouple Sensors Approved to ATEX and IECEx standards

TTC200X

-

Labfacility Ltd.

TTC200X - Labfacility Ltd.

Approved to ATEX and IECEx standards allowing for use in hazardous area applications.

Product

Standard Air Capacitor Set, 1pF To 1000pF

16380A

-

Keysight Technologies

16380A - Keysight Technologies

The 16380A is a standard capacitor set consisting of four precision capacitors - 1pF (16381A), 10pF (16382A) 100pF (16383A), 1000pF (16384A). These capacitors are primarily used for performance tests of Keysight's 4-terminal pair LCR meters and impedance analyzers. Refer to the instrument's operation/service manual for the method of using these standards.