Mass Interconnect
reliably connects modular instrument system's multiple signal type IO (Input Output) with interchangeable test sets.
See Also: Interconnects, Connectors, Cable Assemblies, Switching Matrix, Interfaces, Modular Instruments, Matrix
-
Product
Triple Quadrupole Mass Spectrometry
Xevo TQD
-
The single vendor solution for routine quantitative UPLC-MS/MS applications, providing maximum accessibility to the sensitivity, selectivity and robustness needed to ensure maximum productivity with minimum effort.
-
Product
Mass Flow Controller for Medium Flow
HFM-201 / HFC-203
-
The HFM-201/HFC-203, Teledyne Hastings' flexible, general purpose series of mass flow meters and controllers accurately measure and control mass flow in a variety of applications. Featuring reliability and stability, the 200 Series is chosen for its very stable performance with varying ambient conditions. A wide choice of elastomer seals make this flow controller compatible with most gases.The HFM-201 / HFC-203 meters and controllers have flow ranges from 0-25 slm to flows of 0-1000 slm; provide analog outputs, are constructed of stainless steel and can be configured with normally open or normally closed valves. The full scale range is specified by the end user. A NIST traceable calibration certificate is standard. Many corrosive gases and pressures up to 1000 psig are easily measured. Cleaning for oxygen service is available.
-
-
Product
Mass Comparators
XPR Line
-
XPR mass comparators provide secure, traceable calibration for weights up to 64kg, making them the instrument of choice for extremely small weigh-ins at high tare load. The comparators’ high repeatability and ability to support low minimum weight values make them the preferred choice for not only weight calibration but also accurate measurement of extremely small goods at high tare loads.
-
Product
Interconnect Adapters
-
Interconnect Adapters funnel wiring from modules to a VXI card. The adapter has removable side, top and bottom plates. Connector cover plates and cable clamps are ordered separately.VPC VXI adapters have been re-engineered to eliminate the need for punching holes in certain manufacturers cards. This design uses a clip that clamps down on the card's existing ejector tabs which firmly fastens the adapter to the card.
-
Product
High-Performance [Liquid Chromatograph Mass Spectrometer
LCMS-2020
-
LCMS-2020 is optimized for the Prominence UFLC/UFLCXR Ultra Fast Liquid Chromatograph. Novel patent-pending technologies offer significantly enhanced scan speed and positive-negative ion polarity switching time, which are essential for UFLC, and simultaneously boost sensitivity. The instrument combines the excellent compound selectivity that is a feature of the mass spectrometer with significantly enhanced total productivity – from method development to analysis. The LCMS-2020 plays a useful role in a range of fields, including the synthesis of compounds in the pharmaceutical and chemical industries.
-
Product
Bruker’s Innovative Mass Spectrometry Solutions
-
Discover new ways to apply mass spectrometry to today’s most pressing analytical challenges. Innovations such as Trapped Ion Mobility (TIMS), smartbeam and scanning lasers for MALDI-MS Imaging that deliver true pixel fidelity, and eXtreme Resolution FTMS (XR) technology capable to reveal Isotopic Fine Structure (IFS) signatures are pushing scientific exploration to new heights. Our mass spectrometry solutions enable scientists to make breakthrough discoveries and gain deeper insights.Our industry leading software solutions such as SCiLs Lab for MS Imaging, FDA cleared microorganism reference library for the MALDI Biotyper, Biopharma Compass 2.0, and Toxtyper are examples our solutions doing the work for you. Bruker's product lines include the following technologies: FTMS, rapifleX MALDI-TOF/TOF, MALDI Biotyper Systems, timsTOF UHR-QTOF, Toxtyper, Triple Quadrupole, HDX Solution, TargetScreener HR
-
Product
Mass Spectrometry
SQ Detector 2
-
Compatible with the broadest range of chromatography platforms and ionization sources, the SQ Detector 2 is the ultimate single quadrupole mass detector for chromatography.
-
Product
Triple Quadrupole Mass Spectrometer
EVOQ™
-
The EVOQ triple quadrupole for liquid chromatography (LC-TQ) was designed for a singular purpose—to reliably quantify thousands of real samples in the fastest sample-to-report time possible. It delivers exceptional sensitivity, precision, accuracy, linearity, and a wide dynamic range for your multiple reaction monitoring (MRM) assays.
-
Product
High Performance Mass Flow Controllers
P-Series
-
P-Series High Performance Multi-gas, Multi-range, Thermal Mass Flow Controllers are designed for the most critical process applications where accuracy, repeatability as well as pressure insensitivity are requirements.
-
Product
Thermal Mass Flow Controllers & Meters for Various Flow Ranges
-
Teledyne Hastings Instruments brings decades of experience to offer a full line of thermal mass flow controllers and meters. Our products provide solutions for a wide range of applications which include high and low flow ranges, corrosive gases and very high-temperature environments. With the assistance of our experienced application engineers and global sales network, we will help you find a reliable, repeatable, and durable solution for applications in both laboratory and industrial environments. Your needs can be met by using quality flow instruments designed and manufactured by Teledyne Hastings.
-
Product
XCITE 1100-5 Inertial Mass Excitation System
-
The 1100-5 Inertial Mass Modal Excitation system allows the testing of structures where backup fixturing is not available or possible. Accelerating an internal mass with the closed loop hydraulic excitation system generates the inertial forces. The compression control of the Xcite Master Controller maintains a constant force over a frequency sweep by continuously altering the drive signal to maintain the required dynamic force level.
-
Product
System-Level Interconnect Solution For ScanExpress Boundary-Scan Tools
ScanExpress Merge
-
Combine Multiple Assembly Test Files Corelis ScanExpress Merge, a member of the ScanExpress suite of boundaryscan test tools, is a software application designed to import and join test files for multiple independent assemblies and assist in configuration of a combined test procedure.Using completed ScanExpress TPG test files and module interconnection data, ScanExpress Merge quickly combines combined test plan files for system testing with minimal user effort.
-
Product
GC Time-of-Flight Mass Spectrometer
PEGASUS® BT
-
Today's laboratories are being asked to do more everyday—more samples run, more data acquired, more chemical information processed, and more results achieved—all in less time, for less money. With LECO’s Pegasus BT users will get all of the data they need from a single sample run, without the need for additional laboratory support. Unique and powerful software and hardware features simplify quantitation while also identifying more components with increased sensitivity. A StayClean™ ion source virtually eliminates the need for source cleaning, while a convenient benchtop package saves valuable space in the laboratory. The Pegasus BT will give users more uptime, improved chemical data, and an increase in overall productivity and efficiency.
-
Product
USB Type-C Interconnects Compliance Test Software
S94USBCB
-
Use the S94USBCB software to test, debug and characterize your USB Type-C cable and connector designs. The PathWave TAP based test sequencer automates the network analyzer (VNA) for each test and generates a comprehensive HTML report. When run with L8990M switch matrix, it enables 20-ports fully automated test without port re-connection.
-
Product
Coriolis Mass Flowmeters
CMF
-
Applicable Fluids: Gases Slurries Liquids. Typical Applications: Custody transfer Reactor feed ratio Density measurement Batch control.
-
Product
Imaging Mass Microscope
iMScope QT
-
Inheriting the concept of a mass spectrometer equipped with an optical microscope from the iMScope series, the iMScope QT is also Shimadzu's flagship model for MS imaging with a Q-TOF MS(LCMS-9030).
-
Product
Coriolis Mass Flowmeters
-
A wide range of meter sizes provide precise measurement of massflow, volume flow, density, temperature and concentration. ABB´s CoriolisMaster series has a history of success in a wide variety of industries and applications. With innovations like SensorApplicationMemory, Easy Set-up and with up to 5 modular I/Os - they save time and money during installation, commissioning and maintenance.
-
Product
Exact Mass Database For Endogenous Metabolites
-
The physical properties of target compounds in metabolomics can vary greatly. An analysis method tailored to the target compounds is therefore needed for comprehensive measurements of metabolites.This database contains multiple ready-to-use methods for comprehensive analysis of metabolites with different properties. Pretreatment examples are also included for various metabolites and samples. The user can begin a metabolomics analysis without time-consuming evaluation of LC or MS conditions.
-
Product
Pressure Insensitive Mass Flow Module
Criterion D500
-
This leading-edge pressure insensitive mass flow module is installed with differential pressure detection and a piezo actuator valve.
-
Product
Low Pressure Drop Thermal Mass Flow Meter
HFM-200 LFE
-
The HFM-200 LFE Series by Teledyne Hastings can be configured and accurately measure gas flow in a broad array of applications. Featuring reliability and stability, the 200 Series is chosen by users for its very stable performance with varying ambient conditions. A wide choice of elastomer seals make this flow meter compatible with most gases.The HFM-200 LFE meter has flow ranges from 0-10 sccm to flows of 0-15,000 slm; provides analog outputs, and is constructed of stainless steel. The full scale range is specified by the end user. A NIST traceable calibration certificate is standard. Cleaning for oxygen service is available. Our laminar flow elements (smooth, threaded or flanged) are available in various sizes from 3/8" up to 8". Low pressure drops at full scale flow.
-
Product
Standard Mass Flow Meter
Series II
-
Offers outstanding value in a wide range of industrial and lab applications. Exceptional accuracy and repeatability with flow ranges from 0.014 cc/min up to 1670 l/min. and working pressures up to 6000 PSIA. Offers multi-gas and multi-range capability
-
Product
Triple Quadrupole Gas Chromatograph Mass Spectrometer
GCMS-TQ8050 NX
-
The Shimadzu triple-quad GCMS-TQ8050 NX is capable of performing unprecedented quantitative GC-MS/MS analyses of ultra-trace amounts, down to the femtogram level. Equipped with a new, highly efficient detector and three forms of noise-reduction technologies, the GCMS-TQ8050 NX has never been more important in industries such as food safety, cannabis testing, forensics, and more.
-
Product
Mass Spectrometry
SYNAPT G2-Si
-
Information. Informatics. Impact. SYNAPT enables extensive characterization of complex mixtures and molecules with uncompromising qualitative and quantitative performance, streamlined workflows and unparalleled platform versatility.
-
Product
ICP-MS spectrometers (ICP MASS)
-
SPECTRO Analytical Instruments GmbH
SPECTRO MS is a double-focusing sector field ICP MS (ICP mass spectrometer) based on a Mattauch-Herzog geometry with a newly developed ion optic and pioneering detector technology. It is the only ICP MS instrument available on the market today that is capable of simultaneously measuring the complete mass range used for inorganic mass spectrometry from 6Li to 238U with a permanent ion beam going to the detector.
-
Product
Digital Mass Flow Controller and Meter
300 Vue Series Digital Flow Meter
-
The 300 Vue is our newest series of digital gas thermal mass flow instruments which provide accurate, fast and convenient gas measurement and control. The color touchscreen display allows for local adjustments and monitoring of gas flow. Powerful and intuitive menus enable control of the gas flow in many ways. The instrument can be installed and operating in seconds. Flexible custom flow instruments without the custom price or lead time.
-
Product
PM Mass Monitor
Model T640
-
Teledyne Advanced Pollution Instrumentation
The Model T640 PM Mass Monitor is the next breakthrough in ambient particulate monitors. The T640 delivers 1-min or better time resolution with exceptional sensitivity and precision. The instrument is very low maintenance and requires no sample media for minimal cost of operation.
-
Product
Vapor Source Mass Flow Controller With Viscous Choked Flow
-
The 1150C Vapor Source Mass Flow Controllers are pressure based measurement and control systems designed to meter and control vapor from low vapor pressure liquid and solid sources directly, without the need of a carrier gas using viscous flow through a choked orifice.
-
-
Product
X-Flow Mass Flow Controller
-
The Parker X-Flow™ is a simplified mass flow controller for your instrument, lab or process needs. Fast, Reliable and Repeatable performance designed for OEM, Laboratory, or Process flow control instrumentation
