Disk Drive
Store data on magnetic surface plattens.
-
Product
SATA Solid State Drive (SSD) Modules; 2TB TLC
FM9
Solid-State Drive
SATA Solid State Drive (SSD) Modules (FM9) is a plug-in SATA drive compatible for use with NAI single board computers and multifunction I/O boards where a direct SATA interface to a processor is supported. The FM9 module has a capacity of 2TB in a triple-level cell (TLC) construct.
-
Product
SQFlash MSATA 650, SATA Gen. 3 (6.0Gbps)
SQF-SMS 660
Solid-State Drive
SATA 3.2 Compliant, MO-300 mSATA Module. Supports LDCP & RAID ECC, SMART, SQLog & SQAnalyzer for diagnosis. GUI management tool & software API package, -20 to +75 °C operation temperature, and can withstand peak up to -40℃ or 85℃ for 1hr.
-
Product
PWM Servo Motor Drives
Servo Motor Drive
NAI's PWM Servo Motor Drives provide programmable, PWM output drive (up to 65 V @ 10 A continuous) from a single +28 VDC input source and Drives Brushed or Brushless (BLDC) motors. Available in 3U OpenVPX and VME board constructions and specifically designed for rugged defense, industrial, and commercial applications with a -40°C to +85°C operating temperature range, these PWM Servo Motor Drives deliver a COTS solution for embedded motor control applications.
-
Product
SQFlash ER-1 U.2 2.5" SSD (SFF-8639) PCIe/NVMe Gen.4 X4, Edge Grade
SQF-CU2 ER-1
Solid-State Drive
U.2 (SFF-8639) PCIe/NVMe 2.5" SSD, Compliant with PCIe Gen. 4 x 4 interface and NVMe 1.4, AES-256 Support & TCG-OPAL Compliant. Support LDPC with RAID ECC, Read-Intensive and Mixed-Use support. Heat-spreading design with thermal solution, SMART and GUI management tool.
-
Product
IGBT Drive
-
IGBT gate drive photocouplers (optocouplers) are optically coupled isolators containing a GaAlAs LED on the input side and a photo diode, signal processing circuit and power output transistor on the output side in a single chip. This coupler is designed specifically to provide high common mode transient immunity (CMR) and a high output current, and has an active miller clamp and high switching speed, making it ideal for driving IGBTs and MOS FETs.
-
Product
HVAC Drives
-
Our variable frequency drives are designed for HVAC applications, which include air handlers, cooling towers, and pumps, by combining reduced size and cost with advances in performance and quality.
-
Product
USB Device Servers
-
Enable printers, scanners, disk drives, cameras, card readers, and virtually any other USB device to be shared over the network so that multiple users can access the same USB device.
-
Product
Drive Tester
Disk Manufacturing Module
-
SCSI Toolbox LLC is proud to announce the Disk Manufacturing Module, joining a decade of real-world drive testing experience with input from hundreds of customers to bring the best new testing tool to the disk manufacturing and integration marketplace.
-
Product
EC Drive
-
Being the reckoned names in the industry, we offer wide range of EC Drive that is acclaimed among the clients for high quality and sturdy construction. We offer them in standard configurations and ensure smooth operations. They have high strength and are used in different industrial sectors. Moreover, we deliver them in well-defined time.
-
Product
IQpump Drives
-
Our drives were designed with the pump service operators and pump system owners in mind and offer ease of setup and comprehensive pump and motor protection features.
-
Product
SQFlash 840L Series Industrial 2.5" SATA SSD, Enterprise Series
SQF-S25 840L
Solid-State Drive
Compliant with SATA III and SATA v3.2 standard, 5Y DWPD >1 High Endurance. Power Loss Protection, AES-256 Support & TCG-OPAL Compliant. Support LDPC with RAID ECC, GUI management tool & software API package.
-
Product
Monitoring & Drive Test Antennas
-
Linear polarized half-wave dipole with 1:1 balun and fixed element length for fieldstrength measurements at TETRA (terrestrical trunked radio) networks.
-
Product
IPM Drive
-
IPM drive photocouplers (optocouplers) are optically coupled isolators containing a GaAlAs LED on the input side and a photo diode and signal processing circuit on the output side in a single chip. This coupler is a high common mode transient immunity (CMR), high CTR type whose pulse width changes according to the operating temperature, making it ideal for driving IPMs (intelligent power modules).
-
Product
Drives
-
Empower your business with profitable efficiencyYou base your business on efficiency and performance. You know that everything counts to make you more competitive. Our drives are made with all this in mind, empowering productivity and efficiency. They provide flexibility to help you optimize your processes and control, and reliable for less downtime. You also get premium service and expertise, anywhere on the globe.
-
Product
Z-Axis Drive and Controller
MFC-2000
-
Applied Scientific Instrumentation
The MFC-2000 has been specifically designed to provide a high resolution and highly repeatable, means of controlling the focus/Z position of the microscope stage. Precise control of the microscope's focus is obtained through the use of a closed-loop DC servomotor employing high resolution encoders for positioning feedback. By using closed-loop control of the focus position, there is no chance that the focus point can be lost as can occur with open-loop stepper motors.
-
Product
“Floppy drive” Power Cable
SKU-043-03
-
Female 4-pin “floppy drive” power connectors are on both ends of this cable.
-
Product
Rotating Ring Disk Electrode
RRDE-3A
-
RRDE-3A is a constant rotation system for use in hydrodynamic modulation rotating ring disk electrochemistry. A 7 mm diameter electrode with short stainless steel shaft provides for a miniature and concentric circle electrode system that is capable for highly accurate rotation and modulation even at radial modulation rates or wave forms.
-
Product
Digital Brushless Servo Drives
DA Series
-
The DA series high performance digital servo drives integrates digital position and velocity control with built-in power supplies and the latest in PWM servo amplifier technology. Power range up to 50KVA.
-
Product
3 Mm Glassy Carbon Disk Electrode
CGC1
-
3 mm glassy carbon disk electrode designed for electrochemical research, cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), corrosion studies, electrocatalysis, and sensor development. Manufactured from high-purity glassy carbon with excellent chemical stability, a wide potential window, and low background current. Compatible with CHI104 systems and customizable for laboratory and OEM applications.
-
Product
Motor Drive Test Systems
-
Drive and motor systems present unique challenges for test systems and Intepro combines regenerative active electronic loads to reduce the energy needed to do the tests as well as sophisticate instruments and supply voltages to test these demanding applications and provide meaningful results for the electrical and mechanical power parameters.
-
Product
Automatic Driving System
ADS EVO
-
Vehicle developers face increasing pressure to reduce development times, while vehicle complexity is increasing. The ADS EVO ensures accurate and repeatable global test cycles on chassis dynamometers.
-
Product
Anite Virtual Drive Testing Toolset
S8709A
-
Virtual Drive Testing Toolset integrates sophisticated test automation with industry-leading field and lab test tools, which have the ability to accurately replicate field mobility scenarios.
-
Product
Serial Testing of Hybrid Drives
-
Series test bench with high testing depth for electric machines in hybrid drive concepts*Single or multi-chamber systems to optimize the cycle time*Testing the no-load and load characteristics*Motor and regenerative test*Short circuit measurement*Noise measurement (NVH)*Temperature measurement
-
Product
Walking Drive
N-331 PICMAWalk
-
Physik Instrumente GmbH & Co. KG
OEM Walking Drive for Durable Applications with up to 15 mm/s Velocity and up to 50 N Push/Pull Force. The PICMAWalk walking drive combines the high reliability of the PICMA® actuators with the innovative stepping principle of the already established NEXLINE® and NEXACT® drives. Eight actuators arranged in the shape of a V ensure reliable and the highest possible feed motion with a maximum of 60 N holding force, 50 N push/pull force, and a maximum of 15 mm/s velocity.
-
Product
Stationary Drive Test System
ACTAS CF80
-
Stationary test system for sequential final factory tests and function tests on up to 8 drives. The drive test system is operated and controlled with the ACTAS operating software. The test position is selected using the multiplex method. The test system can reproduce drive control with the aid of a logic module. This makes it possible to test any drive even if there is no control unit.
-
Product
Splitter Drive Cable, 2 Meter
85555A
Serial Cable
This cable is used to connect the 85523A/B CalPod controller to the 85556A CalPod control cable splitter. If longer distances are required, use the 85554A 10 meter drive cable extension. This cable is supplied with the 85556A CalPod control cable splitter.
-
Product
Manual Drive Unit
ATE MA350
-
Parallel contact stroke: 20 mm. Contact force max.: 300 N. Component on PCB: 58 mm. Pressure frame unit-opening angle: 66.Weight: 2,60 kg
-
Product
Piezo-based Nano Drives
attoMOTION
-
attocube’s business unit attoMOTION focuses on the design, engineering and manufacturing of piezo-driven motors and positioning solutions for applications with the highest requirements on precision. Due to their unrivaled accuracy, the compact drive units achieve the most challenging positioning tasks in cutting edge research applications, as well as in industrial fields such as precision machining where they are successfully utilized for the nano precise alignment of optical and mechanical components.
-
Product
Transmissive Rotary Disk
DISK-1
-
US Digital offers a wide variety of standard rotary encoder disks. They may be ordered as a stand alone disk (see below) or as a codewheel (see the Disks page). These rotary encoder disks are made from mylar polyester film. This material allows for a wide temperature range and is virtually unbreakable. There is no minimum order.
-
Product
Direct Drive Motors
-
The Javelin Series enables OEMs to design high performance, reliable, small and lightweight systems using flexible and easy-to-integrate linear motor components. The Javelin Series’ state-of-the art magnetic designs deliver high acceleration and high speeds in compact form factors. Direct drive technology and air core (ironless) construction provide good mechanical stiffness, low cogging and zero backlash, reducing settling times and increasing system performance and throughput.
