Chroma Systems Solutions, Inc.

Product

Power Meters

-

Chroma Systems Solutions, Inc.

Chroma Systems Solutions, Inc.

Designed for both single-phase and multiple phase measurements of AC power signals and related parameters common to most electronic products.

Product

Thermal/Multi-Function Data Logger

51101

-

Chroma Systems Solutions, Inc.

51101 - Chroma Systems Solutions, Inc.

Models with 1, 8, and 64 channels on-line data recording. Multi-sets linked to a PC for hundreds of channels are doableSupports B, E, J, K, N, R, S, and T type thermal couples with ITS-90 defined temperature rangeIndividual channel cold junction compensation withTemperature resolution up to 0.01℃, error down to (0.01% of reading+0.3℃)Voltage full range ±480VDC, ±10VDC; resolution 1mV, 10uV; error down to (0.1% of reading+1mV), (0.015% of reading+100uV)1000VDC channel to channel isolation, full protection for testing points with charge and guarantee for accurate measurementsThermal couple open circuit detectionPC-based operation with powerful software for recording and analyzing data1 and 8 channel models are USB powered. No battery or external power supply is required

Product

Guardian Hipot Analyzer

19056/19057

-

Chroma Systems Solutions, Inc.

19056/19057 - Chroma Systems Solutions, Inc.

Chroma’s Guardian 19056/19057 Hipot Analyzer is specially designed for testing and analyzing ultra-high withstand voltage. The series of models include 10kVac / 12kVdc / 20kVdc with maximum AC20mA / DC10mA output that can perform AC / DC withstand voltage and insulation resistance tests with contact check during production line test.

Product

Milliohm Meters

-

Chroma Systems Solutions, Inc.

Chroma Systems Solutions, Inc.

Measurement functions including DC voltage/current, AC voltage/current, frequency, diode, continuity, temperature and much more.

Product

Low Power Programmable AC Source

-

Chroma Systems Solutions, Inc.

Chroma Systems Solutions, Inc.

Delivers pure, instrument grade AC power at very low cost with output voltage from 0 to 300VAC, and frequencies from 15 to 1000Hz

Product

3-Phase Programmable AC Source

-

Chroma Systems Solutions, Inc.

Chroma Systems Solutions, Inc.

Delivers the right solution to simulate all kinds of input condition of UUT to be utilized in R&D and QA, suitable for commercial applications from laboratory testing to mass production

Product

Regenerative Grid Simulator

Chroma 61800

-

Chroma Systems Solutions, Inc.

Chroma 61800 - Chroma Systems Solutions, Inc.

Full 4 quadrant, fully regenerative, AC power supply designed for common electrical product testing such as home appliances and industrial electronics that require a programmable input source

Product

Safety

-

Chroma Systems Solutions, Inc.

Chroma Systems Solutions, Inc.

The purpose of safety testing medical electronic equipment is to be sure that a device is safe from electrical hazards to the patient and caregivers. There are a number of UL, European and Canadian standards that serve as the ruling body on how medical products will be tested, one in particular, IEC60601 (the International Electrical Safety Standard for medical electronic equipment) is experiencing “global harmonization,” meaning it has been accepted and implemented around the world. The IEC60601 standard is mainly intended for product development where safety considerations must be taken into account early in the design phase of a product, however much of it is applied to production line testing since it is the only way for a manufacturer to be sure they are shipping safe product.

Product

50Hz-100kHz LCR Meter

11022/11025

-

Chroma Systems Solutions, Inc.

11022/11025 - Chroma Systems Solutions, Inc.

0.1% basic accuracyTransformer test parameters (11025), Turns Ratio, DCR, Mutual Inductance0Hz, 60Hz, 100Hz, 120Hz, 1kHz, 10kHz, 20kHz, 40kHz, 50kHz, 100kHz test frequencies21ms measurement time (≥100Hz)Agilent 4263B LCR Meter commands compatible4 different output resistance modes selectable for non-linear inductor and capacitor measuringHigh resolution in low impedance(0.01mΩ) and high accuracy 0.3% till 100mΩ rangeAdjustable DC bias current up to 200mA (constant 25Ω) (11025)1320 Bias Current Source directly control capability0.01mΩ ~ 99.99MΩ wide measurement range (4 1/2 digits)Dual frequency function (11022 option) for automatic productionBIAS comparator functionComparator function and 8/99 bin-sorting functionPass/fail judge result for automatic productionHandler interface trigger edge (rising/falling) programmableTest signal level monitor functionStandard RS-232, GPIB, and Handler I/FOpen/short zeroing, load correctionLabView® Driver

Product

Power Meters

-

Chroma Systems Solutions, Inc.

Chroma Systems Solutions, Inc.

Chroma’s Digital Power Meters are designed for both single-phase and multiple phase measurements of AC power signals and related parameters common to most electronic products. Instead of traditional analog measurement circuits the 66200 Digital Power Meter uses state-of-the-art DSP digitizing technology. The internal 16 bits analog/digital converters with sampling rates of up to 200KHz provide both high speed and high accuracy measurements which is unprecedented within the industry for this class of power meters current on the market.

Product

Battery Cycle Test Systems

-

Chroma Systems Solutions, Inc.

Chroma Systems Solutions, Inc.

High precision, integrated battery charge / discharge cycle test systems designed for lithium ion and other chemistries and applications including EV batteries and energy storage systems. Chroma’s battery test equipment provides advanced features including regenerative discharge systems that recycles energy from the battery back into the channels in the system or to the grid. Systems are configurable and flexible with multiple channel capabilities that can be upgraded as testing requirements change.

Product

Chroma Milliohm Meters

-

Chroma Systems Solutions, Inc.

Chroma Systems Solutions, Inc.

The Chroma 16502 Milliohm Meter is Chroma’s newest digital Milliohm Meter. 0.001mΩ~1.9999MΩ wide measurement range. DC, Pulsed, and Dry-circuit test current driving modes, enable the Chroma 16502 can be properly used in DC resistance measurement for various inductive components (coil, choke, and transformer winding etc.), cable, metallic contact (connector, relay switch etc.) and conduction materials.

Product

Milliohm Meters

Chroma 16502

-

Chroma Systems Solutions, Inc.

Chroma 16502 - Chroma Systems Solutions, Inc.

With a basic accuracy of 0.05%, Chroma 16502 offers a 0.001mΩ ~1.9999MΩ wide measurement range. It provides measurement range with 4 1/2 digits resolution. The fast measurement time is 65 ms. It suits component evaluation on production line. Pulsed test current output mode is used to reduce thermal EMFs affection on milliohm measurement. DC test current output mode is used to fasten measurement speed for inductive DUT. Dry-circuit test current output mode is used to measure such contact resistances where the maximum open-circuit voltage must be limited to 20mV.

Product

Guardian Hipot Tester AC/DC/IR/SCAN

19050

-

Chroma Systems Solutions, Inc.

19050 - Chroma Systems Solutions, Inc.

The Chroma Guardian 19050 series of Hipot Testers are comprised of three models. The Guardian 19052 is equipped for AC/DC/IR Hipot testing and insulation resistance (IR) measurements. The Guardian 19053 combines both AC and DC Hipot tests and IR measurements with 8HV scan channel capabilities. The Guardian 19054 combines both AC and DC Hipot tests and IR measurements with 4HV scan channel capabilities.

Product

Medical System

Sentinel II

-

Chroma Systems Solutions, Inc.

Sentinel II - Chroma Systems Solutions, Inc.

The Sentinel II system provides fully automatic Electrical safety testing to IEC/EN/UL/CSA 60601-1. Sentinel II saves time by scanning patient connections for leakage current without powering down the medical device.