Filter Results By:
Products
Applications
Manufacturers
-
product
XCITE 1300T Torsional Series
The Xcite 1300T Torsional Series of modal exciters provides pure torque input into structures for modal parameter estimation without the bending mode coupling effects present when linear excitation is applied through moment arms. These systems are used in structure borne noise tests of structures such as automotive and truck transmissions, prop shafts, axles, differentials, and torsional engine dampers.
-
product
Electric Servomotor Axis Direct Load Torsion Tester
This equipment is a testing machine for the purpose of conducting torque and vibration fatigue / durability test of suspension bush.
-
product
Motorized dynamic torque bench
TORKHEADRIVER
The TorkHeaDriver is a motorized torsion tester that is equipped with a rotary torque sensor allowing torque and angle measurements on complete system. This torsion meter is particularly well suited for measurements on knobs, valves, faders… installed on sets.
-
product
Electric Servomotor High-speed Rotational Torsion Tester
The torque fluctuation test during high-speed rotation, which was previously only possible with high-output rotation, the motor with high-speed rotation with two motors. the cost of implementation.
-
product
Self-Learning Ship Condition Monitoring System
Datum Hawk
Datum Hawk is an advanced self-learning condition monitoring system, represents the ultimate sensor system for real-time condition-based ship monitoring, providing savings of both time and money.Datum Hawk is a “Smart”, intelligent system, capable of carrying out the torsional signature analysis of main engine(s), auxiliary engine(s) and diesel generator(s), giving a true insight into the vessel’s mechanical health.
-
product
Digital Torsion Meter
Shenzhen Chuangxin Instruments Co., Ltd.
Digital Torsion Meter: Fixed with clamp, rotation the lamp the positive and negative torque rate will be record Torque range: 0-10N.m
-
product
Terminal Mechanical Strength Test
The terminal strength test is used to performed to determine whether the design of electrical terminals and their method of attachment can withstand mechanical stresses to which they will be subjected during installation or disassembly in equipment. These stresses must be withstood by the component without sustaining damage which would affect either the integrity of the terminals or the operation of the component part itself. Procedures are established in this method for testing, for example wire-lead terminals, flexible-flat-strip or tab-lead terminals, and rigid-type terminals which are threaded or have other arrangements for attaching conductors. The forces applied during the test consist of direct axial, radial or tension pulls, twist, bending torsion, and the torque exerted by the application of nuts or screws on threaded terminals.
-
product
Harness Design and Manufacture
When designing an underwater cable harness, there are some factors which need to be considered, and we have produced the following list as a guide for customer information:Component considerations:- Electrical requirements- Mechanical considerations- Quality requirements- Reliability- Design redundancy (contact count)- Connector selection (type and form)- Locking requirements- Backpotting requirements- Waterblocking in moldings- Cable specification- Cable jacket material and compatibility with elastomers- Abrasion resistance- Stiffness profile at termination- Connector format (straight or right angle)- Molding format (straight or at an angle)- Clearance allowance for molding and cable routing- Elastomer compatibility (eg oil filled units)- Metalwork selection re: corrosion and cathodic delamination- Surface finish for metalwork as appropriateOperational considerations:- Operating depth profile (not just max. depth)- Tensile loads- Torsional loads- Bending loads- Bend control requirements (to limit bending at termination)- Deployment and recovery loads- Dynamic loading-Flow turbulence effects.
-
product
Metal Wire Torsion Testing Machine
WTT Series
Jinan Testing Equipment IE Corporation
WTT series metal wire torsion tester is mainly used in a metal factory to test the plasticity of metal wires and ropes under torsion condition. Surface flaws of steel wires may be shown during the testing process. The revolution is displayed on a 4- digit LED, with the max. revolution value displayed as 999.9. The revolution value is automatically held at the break of specimens. With computer & software, the Metal Wire Torsion tester can realize automatic control. The Metal Wire Torsion tester conforms to standard ASTM A938, ISO7800. The Metal Wire Torsion tester is an ideal QC tool for Quality Inspection & Control Department related to steel wire application.
-
product
Digital Torque Meter Torsion Tester
HN-1E~20E
Shenzhen Chuangxin Instruments Co., Ltd.
Digital Torque Meter is an intelligent metrologic instrument, which is designed for various torque test and calibration. It's mainly used for electic/manual torque drive, torque screwdrivers, bolt driver, tension wrench and other testers and products which refer to tightening force. It is widely applied in these industries, such as electrical manufacturing, machine manufacturing, car light industry, professional research and tests, and so on.
-
product
Torque Transducers
Interface offers both reaction and rotary style torque transducers.Whether you need torque transducers for rotary torque, axial torsion or reaction torque, you don't have to be an expert in torque measurement, because we are. Talk to us about what sort of torque you need to measure, and under what conditions and constraints. We'll walk you through the specification process, quickly and efficiently, and if we don't have what you need on the shelf, we'll be happy to customize an existing product or build a new one from scratch to meet your exacting requirements.
-
product
XCITE 1200T Torsional Series
The Xcite 1200T Continuous Torsional Exciters provide high inertial torque in the frequency ranges required to excite steam turbine rotors, deisel engine crankshafts, and ship power drive trains. The speed range of up to 3600 RPM for the 1200T-9 and 7500 RPM for the 1200T-10 system is ideal for testing a broad range of rotating power generation equipment.
-
product
DIgital 3D Image Correlation System
Q-400
The Digital 3D Image Correlation System Q-400 is an optical measuring device for true full-field, non-contact, three-dimensional measurement of shape, displacements and strains on components and structures made from almost any material.The Q-400 system is used for determination of three-dimensional material properties in tensile, torsion, bending or combined tests. In addition, deformation and strain analysis can be applied to fatigue tests, fracture mechanics, FEA validation, and much more.
-
product
Dual Digital Display Spring Torsion Testing Machine
Model TNS-S Series
Jinan Testing Equipment IE Corporation
TNS-S series testing machine is mainly used for testing the torsion angle and torque of various torsion springs, coil springs, elastic components and other friction structures.
-
product
manual torsion bench
TWIST
To carry out a precise, repetitive torque measurement, it is often necessary to use a torsion test stand. The Twist, 10 to 500 lb/in torsion test stand, with combined torque/angle measurement provides this function. The torsion meter enables torsion tests to be made on various samples such as springs, metal or plastic parts.
-
product
Zipper Torque Tester
TF150C
TESTEX Testing Equipment Systems Ltd.
Zipper Torque Tester, to determine the torsion resistance of zippers, 3 test methods is offered: torsion breaking, angle test and load test.
-
product
Torque Meters
A device designed to determine the torque or torsion in a shaft, usually by measuring the twist in a calibrated length of shafting
-
product
Dual Digital Display Spring Torsion Testing Machine
Model TNS-S-I Series
Jinan Testing Equipment IE Corporation
This series is mainly used for torsion test of all kinds of torsion springs.
-
product
Computer Control Torsion Testing Machine
NDW Series
Jinan Testing Equipment IE Corporation
NDW Series computerized torsion testing machine provides loading and weighing capabilities in both rotation directions which enables it to determine conveniently not only the ultimate torque of a specimen, but also how the specimen behaves under conditions of continuous or intermittent torque loading in both directions. The computerized torsion testing machine is mainly used for the torsion test of metal and non-metal materials, as well as the torsion test for parts and components. The computerized torsion torsion testing machine is an essential instrument to measure torsion properties of materials for mechanical laboratories of aviation industry, construction industry, scientific research department, universities and industrial enterprises.
-
product
Dynamic Mechanical Analysis
The DMA systems from Anton Paar perform dynamic mechanical analysis in torsion, tension, bending and compression at unprecedented precision. Whatever your DMA requirements are, the DMA systems from Anton Paar are efficiently and comfortably adapted to meet your needs. Use the systems for the dynamic mechanical analysis of solutions, melts, solid bars, films, foils, or reactive resins.
-
product
Axial Torsional Extensometers
Model 3550
Jinan Testing Equipment IE Corporation
Designed for simultaneously measuring axial and torsional deflections on specimens tested in axial/torsional machines.
-
product
IEC60065 Socket Torque Balance Tester Torsion Tester
Shenzhen Chuangxin Instruments Co., Ltd.
*Plug and Socket Torque Tester/Device is for compliance is checked by engaging the device, as during intended use, with the socket-outlet of a test apparatus. *Plug Torque Tester/Equipment is a device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets.The balancing arm of the test apparatus pivots about a horizontal axis through the centre lines of the contact tubes of the socket-outlet at a distance of 8 mm behind the engagement face of the socket-outlet.*With the machine not in engagement, the balancing arm is in equilibrium, the engagement face of the socket-outlet being in the vertical position.After the device has been engaged, the torque to be applied to the socket-outlet to maintain its engagement face in the vertical plane is determined by the position o a weight on the balancing arm.
-
product
Engine Dynamometer
DS48-HS
Power: 2,883 hp (2,149 kW)Torque: 9,500 lb-ft (12,880 Nm)Speed: 4,000 rpmWater Use*: 201 gpm (760.9 lpm)Inertia Value**: 231.6 lb·ft2 (9.8 kg·m2)Shipping Weight: 3,740 lb (1,696 kg)Rotation: bi-directional*No Cooling System** With Companion Flange or Torsional Coupling
-
product
Rugged Cabinet
MS Series
The M-Series MIL-STD Cabinet offers a high level of integrity with its all-welded 12 gauge steel frame construction, and eight, 3-dimensional support braces (12 gauge), providing added resistance to demanding compressive and torsion loads.
-
product
Force Sensor Elements
The STL Force Sensing Tension Links are a series of unique force sensors. The Tension Links utilize the internal strain gage process sucessfully and are used in bolts, load pins and flat load cells. The sensing element consists of a strain gage bridge circuit internally installed in a small hole along the longitudinal axis. This unique arrangement provides a most effective means for the protective sealing of the internal electronics while minimizing the adverse effects of extraneous torsion and bending loads.
-
product
Leather testing machine
Dongguan Lixian instrument scientific co.,LTD
Leather torsion resistant testing machine is used to test the folding nature for various leather and fabric.The machine used to test the folding nature for various leather and fabric, Materials need be nipped both inside and outside, Twist and turn over and over again until a certain number, Observe the damage of the tested materials, this machine applied to use in clothing, shoes, bags and other thin material leather.
-
product
UL496 Lampholders Screw Torque Tester
CX-DZN
Shenzhen Chuangxin Instruments Co., Ltd.
Lampholders Screw torque tester is strictly designed according to UL496 etc. It's mainly used to the screw lampholder torsion test of protecting accidental force.
-
product
Torque Detectors
RH series
High rigidity: highly accurate detection of torque fluctuation with high response. The RH series is a torque detector that can accurately detect torque fluctuations with high torsional rigidity about 4.5 times compared to the existing products.
-
product
Digital Torque Meter Torsion Measurement
HN-10
Shenzhen Chuangxin Instruments Co., Ltd.
HN series digital torque meter is a general-purpose portable torque load test instrument, has the characteristics of small volume, light weight, easy carrying, multiple functions, high precision, etc., and is applicable for torque tests of various products and experiments on correcting component torque destruction, etc. Small-sized experiment machines with different purposes can be formed through combining with various machine stations and cramping apparatuses.
-
product
Vertical Dual Display Spring Torsion Testing Machine
Model TNS-S-L Series
Jinan Testing Equipment IE Corporation
This series of testing machines is mainly applicable for testing the torsion angle and torque of various kinds of small-sized torsion springs, coil springs, elastic components and other friction structures.
