Product

Manual Fixture Kit

230376 – CMCSK-07-01

-

Columbia Elektronik AB

230376 – CMCSK-07-01 - Columbia Elektronik AB

Linear click system with ball bearings, using gas springs.10 mm ESD-proof top cover with aluminum reinforcement bars.Steel base cabinet with detachable aluminum back and bottom panels.Detachable interchangeable case system with an 8 mm spring-loaded probe protection cover.Base cabinet fitted with a telescopic guide rail and catch.

Product

Rack Mount Osprey Chassis 9-Slot Unibus

9677-U

-

Strobe Data Inc.

9677-U - Strobe Data Inc.

14" high by 19" wide by 20" deep (356 x 483 x 508 mm), this chassis is FCC certifiable**. AT style motherboard, 3 x 5-1/4" bays, 2 x 3-1/2" bays, 1 hidden, 1 exposed. Cooling fans and space are included for user's hex-height, 9-slot DD-11 Unibus backplane, PC motherboard, diskette and hard drives (one hidden and four visible half-height bays).

Product

IEC 60884-1 Fig41 High Temperature Indentation Tester For Socket​

CX-YH

-

Shenzhen Chuangxin Instruments Co., Ltd.

CX-YH - Shenzhen Chuangxin Instruments Co., Ltd.

IEC60884-1 High Temperature Indentation Test Device For Insulatio Material ndentation Device : For pressure tests on plug pin insulating sleeves at temperatures to 200° C with 2.5N loads, according to IEC60884-1 figure 41, BS1363 figure 10. This apparatus has a rectangular blade (see IEC60884-1 figure 41A) with an edge 0.7 mm wide, to be used in the case of round pins, or a blade having a round

Product

Elevated 1.68 (48.00) - 7.00 (198.00) High Performance Lead Free Probe

LFRE-1H-7

-

ECT

LFRE-1H-7 - ECT

Current Rating (Amps): 6Average Probe Resistance (mOhm): 10Test Center (mil): 75Test Center (mm): 1.91Full Travel (mil): 250Full Travel (mm): 6.35Recommended Travel (mil): 167Recommended Travel (mm): 4.24Mechanical Life (no of cycles): 500,000Mechanical Life Remark: *Ultra High force products may observe slight decrease in cycle life.Overall Length (mil): 1,300Overall Length (mm): 33.02

Product

For AIM-65, AIM-68, AIM-75S And AIM-78S

LAN+COM Module

-

Advantech Co. Ltd.

LAN+COM Module - Advantech Co. Ltd.

Black130.2 x 70 x 29 mm (5.13 x 2.76 x 1.14 in)0.078 kg (0.171 lb)

Product

Test Kit

Metriso B530

-

Wolfgang Warmbier GmbH & Co. KG

Metriso B530 - Wolfgang Warmbier GmbH & Co. KG

Test voltage / Test current: 1 mA < I < 1,3 mAHigh ohmic range: DC 10 volts,100 volts and 500 voltsTest range:low ohmic range: 1 to 10 kOhmhigh ohmic range: 1 kOhm to 199 GOhmOperation: Battery operatedProbes:2x Model 870 (weight: 2,27 kg / ø 63,5 mm) with conductive rubber (grey) and extension,1x hand-held probe Model 45

Product

Specialized Beam Profiler Systems

-

DataRay Inc.

DataRay Inc.

DataRay offers specialized beam profiler systems. These systems offer solutions for complex applications. The large beam profiling system is suitable for beams up to 200 mm image area, and the line laser profiling system provides for direct measurement of line lasers up to 200 mm in length.

Product

Thermal Warpage Metrology Tool

AXP 2.0

-

Akrometrix, llc

AXP 2.0 - Akrometrix, llc

The TherMoiré® AXP 2.0 is a modular metrology solution that utilizes the shadow moiré measurement technique, combined with automated phase-stepping, to characterize out-of-plane displacement for samples up to 400 mm x 400 mm. With time-temperature profiling capability, the TherMoiré® AXP 2.0 captures a complete history of a sample’s behavior during a user-defined thermal profile.

Product

Terahertz (THz) Lasers From 0.89 To 2.52 THz

-

Insight Product Company

Insight Product Company

Insight Product Company offers terahertz lasers at frequencies from 0.89 to 2.52 THz. Output power is from 1 mW to 15 mW. Diameter of the output wave beam is ~ 40 mm. Typical sizes is 1.2x0.3x0.4 m. Transformer from quasi-optical output to the standard wave guides can be provided. The energy pumping is provided either by DC discharge or HF discharge.

Product

Impact Testing

-

Educated Design & Development, Inc.

Educated Design & Development, Inc.

1250 g body includes release mechanism and striking element guide.250 g striking element comes with cocking knob and hammer head, polyamide face, is hemispherical with a radius of 10 mm, has a hardness of HR85-100.60 g release cone with a 10N release force.Single Impact Force models range from a 0.2 J Hammer to a 2.0 J Hammer.Custom padded carrying case included.

Product

2D-3D Laser Measurement

-

MTI Instruments

MTI Instruments

Long range profiling laser displacement sensor is built to satisfy the most demanding automated dimension, angle, curvature and height in the industrial application. At a fast speed of 6,000 frames per second and up to 2.5µm resolution, it also has measuring of up to 800 mm.

Product

UDT-Series Integrating Sphere Systems

-

Gamma Scientific Inc.

Gamma Scientific Inc.

Gamma Scientific offers a variety of pre-configured integrating sphere systems for use in conjunction with the UDT line of optical meters, with both 25 mm and 150 mm diameters.

Product

Manual Fixture Kit

230355 – CMK-06

-

Columbia Elektronik AB

230355 – CMK-06 - Columbia Elektronik AB

Linear click system with ball bearings, using gas springs.10 mm ESD-proof top cover with aluminum reinforcement bars.Steel base cabinet with detachable aluminum back and bottom panels.Detachable interchangeable case system with an 8 mm spring-loaded probe protection cover.Base cabinet fitted with a telescopic guide rail and catch.

Product

IEC60335-2-9 Clause 3 Figure 103 Vessel For Testing Hotplates​

CX-GZ

-

Shenzhen Chuangxin Instruments Co., Ltd.

CX-GZ - Shenzhen Chuangxin Instruments Co., Ltd.

IEC60335-2-9 clause 3 figure 103 Vessel for testing hotplates​Parameter:1.Pot and lid material industrial aluminum2. Pot material thickness 2 mm;3. The bottom of the pot body can not be outward convex, can not exceed 0.05mm;4. Pot body and lid surface should be smooth;5, size: 110, 145, 180, 220, 300mm each one​