Watch Battery
single cell battery 5-20 mm round and 1-6 mm thin.
-
Product
PathWave BenchVue Advanced Battery Test And Emulation
BV9210B
-
The BenchVue Advanced Battery Emulation Software helps determine your device's power consumption, emulate battery, and import existing battery models.
-
Product
High Current Probes (Battery Contacting) HCF73214B250G300A
1165610
-
The High Current Probes (Battery Contacting) HCF73214B250G300A is an essential tool for precision electrical measurements. Designed for reliability under demanding conditions, this basic contact probe exhibits exceptional performance metrics including a continuous current rating of 20A and a notable contact resistance of just 10mΩ. Its operational temperature range spans from -45°C to +200°C, making it suitable for various industrial applications where temperature fluctuations are prevalent. This probe is constructed with advanced materials such as beryllium copper for the plunger, providing excellent electrical conductivity, while its gold plating ensures long-lasting performance and minimal degradation over time.
-
Product
SLA battery charger
SBSC11Q
-
The SBSC11Q is a battery charger designed to simultaneously charge up to four SBSC11 sealed lead acid batteries or other SBS type batteries having a nominal voltage of 12.0V
-
Product
Battery Analyzers
CA 1550 – Military Version
-
*Portable Battery Charger / Analyzer.*0-25 Amp Charge.*0-50 Amp Discharge.*Fully adjustable.*115/230 Volt AC Input.
-
Product
Solid-State Three-Electrode Battery Test Cell
SST1
-
Solid-state three-electrode test module with a 40 mm PEEK sleeve, adjustable ≥4 mm inner diameter, and pressure capability up to 500 MPa for advanced electrochemical analysis and battery research.
-
Product
High Current Probes (Battery Contacting) HCF34009S250L260
1012273
-
The HCF34009S250L260 High Current Probe is an advanced contact probe designed specifically for reliable battery contacting applications. With a robust design and a basic contact probe structure, it excels in precision and performance. This model operates efficiently across a wide temperature range from -45°C to +200°C, making it suitable for various demanding environments. The continuous current capacity of 16A ensures it meets the high power requirements necessary for battery testing, while the typical contact resistance of 10 mOhm guarantees minimal energy loss during operation.
-
Product
High Current Probes (Battery Contacting) HCC150D06ALS10TYPK
1114189
-
The High Current Probes (Battery Contacting) HCC150D06ALS10TYPK is engineered for robust performance in a variety of demanding applications, operating effectively in temperatures ranging from -45°C to +200°C. This unit is designed to handle continuous currents of up to 150.00 A, boasting a low typical contact resistance of only 0.30 mOhm, ensuring minimal power loss and efficient energy transfer. The mechanical specifications enhance its usability with a maximum travel distance of 4.50 mm, making it suitable for pouch cell test environments which require precise and reliable contact.
-
Product
Battery Charger-Dischargers & Monitors
-
It is a compact and multi-functional unit with three major functions: battery charger, battery discharger and battery activator. These three functions could be used individually or comprehensively to facilitate your daily work for battery maintenance. JUNXY single battery regenerator could be applied for different cell voltages, such as 2V, 6V & 12V single cell battery regenerator, while JUNXY battery string regenerator covers 24V, 48V, 110V, 220V battery strings with different charge/discharge current selectable.
-
-
Product
Battery Module Test Chambers
-
Guangdong Bell Experiment Equipment Co.,Ltd
This test chamber series mainly for testing the battery module of Electric-bike, Electric Motorcycles, etc. These series meet the standard compliance of IEC62619, UL2580 and GB31485-2015. Including short circuit, thermal test, drop test and crush test, etc.
-
Product
Automotive Battery Testers
-
ELAK Battery Testers are high-rate discharge testers. These testers impose a load on the battery, which is equivalent to that drawn by the starter motor from the battery, while cranking the engine. The tester studies the drop in battery voltage & indicates the condition of the battery if it is capable of starting the engine or not.
-
Product
Scienlab Battery Test System — Cell Level
SL1002A
Test System
Test System with up to 36 Channels.The Keysight SL1002A provides sink and source with 0 to 6 V, 100 to 600 A, 0.6 to 3.6 kW and 36 channels for battery cells.
-
Product
Battery Testing Systems
BTS1
-
Air battery test cell for laboratory electrochemical experiments and air electrode research. The transparent acrylic structure allows clear observation of internal reactions, while 304 stainless steel components provide corrosion resistance for reliable testing.
-
Product
Battery Impedance Tester
-
TES Electrical Electronic Corp.
Test conditions without shutting down battery.Simultaneously measures battery resistance, Voltage, current, and temperature.Auto-hold and auto-data storage. Comparator Function.Rates conditions as pass, warning, or fail.
-
Product
High Current Probes (Battery Contacting) HC200F06G75NTC
1089289
-
Introducing the High Current Probes (Battery Contacting) HC200F06G75NTC, engineered for precision and durability in high-performance applications. This coaxial probe is designed to handle extreme temperatures ranging from -45°C to +200°C, ensuring reliable performance across a wide range of operating conditions. With a robust continuous current rating of 300A and a low typical contact resistance of just 0.20 mOhm, the HC200F06G75NTC is ideal for demanding electrical environments.
-
Product
Battery (EV) Automatic Test System
-
Landrex Technologies Co., Ltd.
Battery (EV) Automatic Test System
-
Product
High Current Probes (Battery Contacting) HC200D06G73PT1000CF
1125162
-
The High Current Probes (Battery Contacting) HC200D06G73PT1000CF, identified by the order code 1125162, is engineered for high-performance applications requiring robust interfacing with battery connections. This basic contact probe is designed with precision to handle continuous currents up to 300 A, making it ideal for demanding environments. Its operational temperature range of -45°C to +200°C ensures reliability in extreme conditions, while the typical contact resistance of just 0.20 mOhm guarantees minimal energy loss during operation, enhancing the efficiency of any battery-driven system.
-
Product
High Current Probes (Battery Contacting) HC200D06G73PT100CF
1124561
-
The High Current Probes (Battery Contacting) HC200D06G73PT100CF are meticulously designed to operate efficiently within a temperature range of -45°C to +200°C. These probes are equipped with a continuous current capability of 300A, making them ideal for high-performance applications. Featuring a compact pitch of 25mm and a nominal travel of 5.6mm, these probes excel in providing reliable electrical contact while maintaining low typical contact resistance at just 0.20 mOhm.
-
Product
Dual channel battery charger and analyser
TS25 MKII
-
Rugged and reliable designed for busy maintenance workshops, the TS25 MKII charger is suitable for every industry where batteries are used. It features a software controlled self-calibration facility which amounts to zero downtime for calibration.
-
Product
Lithium Battery Test Chambers
-
Dongguan Amade Instruments Technology Co., Ltd
Lithium battery test chambers are used to simulate various extreme conditions such as crush, impact, penetration, overcharge etc the lithium ion cells and batteries are subjected to during use, transportation, storage and disposal to determine the safety performances, tests including altitude simulation test, thermal test, vibration test, shock test, external short circuit test, impact/crush test, overcharge test, discharge test etc based on UN38.3, IEC62133, UL1642 standards. Applicable to communication products, computer products, consumer electronics, automobile power supplies and so on.
-
Product
CTEK Multi US 7002 Battery Charger
56-353
-
The MULTI US 7002 is the ideal battery charger for your caravan, car and boat. The battery charger is well suited for all-year use. Thanks to its SUPPLY mode the battery charger provides power even without a battery. The SUPPLY mode is indispensable when changing the battery as you avoid losing complicated program settings.Perfect for vintage car, boats with one battery, boats with start & service battery, boats with start & service bank, scooter, motorcycle, Quad/ATV, lawnmower, caravan, and tractor.Includes two interchangeable connection leads, one with clamps, and one with eyelet terminals.
-
Product
Automatic Battery
BATLV800
-
Lifasa - International Capacitors, SA
LIFASA automatic capacitor banks are used for centralized compensation of power factor in low voltage instalations.
-
Product
New Battery Conductance Tester
-
Hangzhou Xun Anda Electrical Co., Ltd.
1. Test application: 12V/6V batteries test and 12V Starting /Charging system test.2. Test battery type: regular liquid, AGM battery, GEL battery,VRLA battery3. CCA test range: 40~2000CCA (SAE).4. Voltage test range: 1.5-15V.5. Display SOH (state of health), SOC(state of charge).6. Test for multiple battery standards: SAE, DIN, EN, IEC, CA.7. Graphic LCD display with back light, LCD brightness adjustable.8. Multigle language operation: English, Chinese, Germany, French, Spanish. 9.internal resistance
-
Product
MINI Battery Discharger & Capacity Tester
IDCE-4815CT
-
Fuzhou Fuguang Electronics Co., Ltd.
IDCE-4815CT can provide 0-150A (steps:1A) adjustable current for different test requests
-
Product
High Current Probes (Battery Contacting) HC200C06G72PT1000
1034016
-
The High Current Probes (Battery Contacting) HC200C06G72PT1000, identified with order code 1034016, is a meticulously engineered coaxial probe designed for superior performance in harsh environments. With a temperature range of -45°C to +200°C, this probe excels in various applications requiring robust thermal and electrical stability. The HC200 features a 25mm pitch, ensuring precise contact during operation, while maintaining a continuous current rating of 300A, which is crucial for high-demand scenarios. Its typical contact resistance of just 0.20 mOhm further enhances efficiency, minimizing power loss during operation.
-
Product
Battery and Capacitor Testers
-
Battery test system developed on the basis of the experience and know-how that we have amassed through implementing numerous custom-built battery evaluation systems.
-
Product
Low Voltage DC / Battery Powered HV Amplifiers
WMA-01 And WMA-01LF
-
The Falco Systems WMA-01 is a high voltage amplifier that runs from an 24 - 30V DC power supply and can be battery powered if required, e.g. for use in a Faraday cage. Its internal high voltage generator is inductor-free and hence does not spread magnetic interference in sensitive experimental setups. The output noise is impressively low at 3mVrms. For extremely low noise applications where bandwidth is not an issue, a dedicated WMA-01LF version is available that contains an output low pass filter capacitor which reduces the bandwidth to 50Hz, but makes the noise drop to below 0.1mVrms. This bandwidth-limited amplifier is ideal for MEMS or piezo positioning with manual voltage adjustment.
-
Product
Graphite CBrass Flow Battery Electrochemical Cell
GSF1
-
A laboratory square flow battery experimental kit designed for electrolyte circulation studies, redox flow battery research, and electrochemical testing with stable liquid flow and corrosion-resistant construction.
-
Product
Ceramic Solid-State Battery Compression Test Cell
CSS1
-
Ceramic solid-state battery compression test cell with a 10 mm inner diameter, titanium alloy body, PEEK insulation, and ceramic liner for battery assembly and electrochemical testing.
-
Product
Vacuum & Airtight High-Pressure Battery Test Cell
VAH1
-
PMMA vacuum airtight battery test chamber with Ø100 × 180 mm inner dimensions, supporting +0.1 MPa positive pressure and vacuum down to -0.2 MPa for battery safety testing and transport simulation.
