PCB Test Fixtures
jigs which hold, align and engage pcb with test interconnect.
See Also: Test Fixtures, Board Test Fixtures, ATE Fixtures, Bed of Nails
-
Product
Shock And Vibration Testing
-
Alpes Lasers SA offers a service of shock and vibration testing. Originally designed for qualifying laser devices to the MIL-STD-810H defense standard, the same tests can be applied to a variety of different products.
-
Product
Capacitance Tan-Delta Test Set
-
Since our establishment in the year 1975, we have been engaged in manufacturing and exporting Capacitance Tan-Delta Test Set. This test set is extensively used to measure dissipation and capacitance of various equipment. Manufactured at our well-equipped manufacturing unit as per set international quality standards using supreme quality components, this test set is tested thoroughly by our quality analysts on various defined parameters. Offered Capacitance Tan-Delta Test Set can be purchased from us at pocket-friendly prices.
-
Product
Telecom & Data Test
-
Electro Standards Laboratories
iagnostic tools such as Breakout Boxes/Interface Analyzers designed for use at the data interfaces of modems, multiplexers, terminals, and computers. Electro Standards Laboratories' Series of Breakout Boxes/Interface Analyzers are virtually indestructible and compatible with RS232, HSSI(SCSI-2), EIA/TIA RS530 interfaces.
-
Product
EMC Testing EMCD
-
Efficient and flexible EMC testing services for product CE marking, UKCA marking and demonstrating compliance with US FCC and Canadian ISED regulations. Our experienced engineers will guide you through the test process, helping you to save time, minimise project costs and get your product to market quickly.
-
Product
Bump Test Machine
-
Labtone Test Equipment Co., LTD
Bump test systems for electrical products repeating impact testing during transportation
-
Product
Environmental Test Chamber
-
High and Low Temperature Test Chambers, ESS Environment Stress Screening, 2 Zone Thermal Shock Test Chamber, 3 Zone Thermal Shock Chambers, Walk-In Chambers, Burn-in Room and Aging Test Chambers, Altitude Chambers, Industrial Drying Oven, Salt Spray Test Chambers, Temperature Humidity Vibration Comprehensive Test Chamber, Test Machine Series, Custom Made Environmental Test Equipment, Double-Layer High and Low Temperature Chamber, Explosion Proof Temperature Chamber For Power Battery, etc.
-
Product
Test Chambers
-
Associated Environmental Systems
Associated Environmental Systems (AES) designs and manufactures standard and customized environmental test chambers. Our products vary in size from small bench top test chambers to very large walk-in environmental rooms. Whether you are looking for off-the-shelf or unique test chamber solution, we can meet your needs.
-
Product
Integrated Test Environment
ITE
-
The Integrated Test Environment (ITE) is our solution to handle complex hardware or software test projects.ITE provides features to define and manage requirements and test cases in different documents, link them with each other as well as plan tests and test campaigns. Moreover the tests can be developed, executed and evaluated by considering the linked requirements. Test results can additionally be recorded and finally reported in different, adaptable and configurable reports.
-
Product
Ultrasonic Testing Systems
-
Matec Instrument Companies, Inc.
Matec designs and constructs a wide range of ultrasonic testing systems, from small laboratory systems designed for simple scanning applications to complex multi-axis systems capable of scanning large parts and complex contour geometries. Click on the links below to learn more about our systems.
-
Product
Thermal Abuse Test Chamber
-
Guangdong Bell Experiment Equipment Co.,Ltd
DGBell's Thermal abuse test chamber is suitable for standard IEC 62133-2017, UL 1642 and GB 31241-2014.
-
Product
Fully-automated Test Systems
Special mechanical systems/solutions
-
Foerster Instruments, Incorporated
Alongside individual test instruments, we collaborate closely with our customers to develop and produce customized test systems for their application. Following a consultation with our product and sales specialists, we develop a concept to suit you. For the production process that follows, we enter into product-specific collaborations with professional mechanical system manufacturers to achieve the best possible solution. We are also happy to work with mechanical system suppliers proposed by our customers. These suppliers are often familiar with the peculiarities of the component and know how to handle them. Even after the production stage, we assist you with commissioning the test system and are are on hand to answer any questions afterwards.
-
Product
Test Services
SHPB
-
Advance Instrument (AI) having solid knowledges and experiences in this field of materials measuring and testing, has developed a comprehensive suite of services providing test, modelling and validating high strain rate behavior of polymeric materials. AI can test tensile and compressive behavior of a wide variety of polymeric materials over strain rates ranging from 10(-3)/s to 10(3)/s combining conventional test techniques with advanced, high strain rate techniques using Split Hopkinson Pressure Bar (SHPB) and instrumented impact testing.
-
Product
Reliability & Enviromental Testing
-
NCEE Labs has been providing industry-standard reliability and environmental testing for 20 years. Our experienced testing staff can assist you in determining the type or level of reliability/environmental testing you require for your products!
-
Product
Software UNIT TESTING product
C-TestIt
-
Unit testing, in the case of C, is understood as the ability to test a function regardless of the rest of the application.Unit testing is a complement to traditional testing, for those Customers who want to improve the quality of their software and therefore reduce future maintenance costs.
-
Product
Ionic Contamination Test Systems
CM+ Series
-
The Contaminometer (CM+ Series) system was originally developed by Protonique, the business of industry guru Brian Ellis. They also featured in the early development programmes of "cleanliness measurement" carried out by the US Department of Defense at China Lake in the 1970s. Historically, International Standard IPC-J-STD001 stated that assemblies be cleaned to a value of <1.5µg/cm2 of NaCl equivalence. However, the new design is linked to the introduction of the new process control metric introduced by Gen3 Systems: Process Ionic Contamination Testing. The CM+ Series measure the amount of ionic contamination in accordance with all existing test methods, often referred to as ROSE testing, as well as the new PICT test.
-
Product
Electrical Safety Test Equipment
-
Making a product “safe” requires an understanding of “hazards” that exist in each electrical product. Electrical shock is one of the four fundamental hazards. Because of that, it must be a part of any product electrical safety evaluation. Even though a product requires an electrical power source and uses electrical or electronic components, it should not present an electrical shock hazard to the user.Ground bond or earth continuity testing prevents electrical shock hazards. Similarly to a fault to earth, test instruments generate a high current. The standard requires that the resistance between protective earth and any conductive surface on the equipment does not exceed 0,1 Ohm. The test is performed by applying a DC current between the conductive surface and protective earth. By measuring the voltage drop, it calculates the resistance.RMO-E instruments are ideal for testing the protective bonding (grounding) of equipment following the standard IEC 61010-1. Applying current up to the value of 100 A and the ability to provide in the Contin menu (continuous operation) test current for the pre-set test duration (equal or exceeding 1 min) gives a user a possibility to easily check the protective bonding/grounding of the equipment. The full load voltage of 12 V assures proper measurement and accurate result. Finally, an instrument displays pass/fail classification according to user-preset parameters.
-
Product
Conductive Anodic Filament Testing
-
AutoCAF™ is able to measure up to 256 individual measurement sites under conditions of high humidity and temperature in accordance with IPC-TM-650 2.6.25 Test Method & IPC 9691 CAF Test Users Guide.
-
Product
Test Software
-
With many years of experience solving real world applications, Circuit Check has acquired extensive software expertise. Our attention to code quality and optimization, as well as our internal code review process, ensures our customers receive efficient and readable code.
-
Product
IT Battery Test System
-
Shenzhen Sinexcel RE Equipment CO., Ltd
IT battery test system support for multiple charging mode (such as CC, CV, CP, pulse, etc.) and discharge mode, to ensure that the battery performance and safety in the practical application. IT battery test system is designed to be modular, easy to maintain, and with anti-reverse connection, data loss and other protection functions
-
Product
AC Test Transformer
-
Yangzhou Power Electric Co., Ltd
The AC test transformer are especially designed for testing high voltage products and components, such as cables, power transformers, gas-insulated switchgears, bushings and arresters. It is also suitable to test insulation materials. They are used to generate testing high voltage and function as part of the complete system. These systems are particularly suited for tests requiring stable voltage even if the load changes under voltage (corona, wet & pollution tests) or when the load is inductive (inductive voltage transformers).
-
Product
Pull-Thru Adapter, PCB, QuadraPaddle, to 96 Pin FML DIN, f/ NI PXIe-4322
510140250
Pull-Thru Adapter
Pull-Thru Adapter, PCB, QuadraPaddle, to 96 Pin FML DIN, f/ NI PXIe-4322.
-
-
Product
Offline In-Circuit Test Solutions
-
TestStation’s offline test systems are designed for a human operator or collaborative robot for product handling. TestStation systems scale to support from 128 to 15,000 test points. Our newest Multi-Site systems double productivity per system, reducing Capex and Opex for manufacturers.
-
Product
Partial Discharge Test System
TPP
-
The Partial Discharge Test System type TPP is used for non-destructive insulation and quality testing of electrical components (for example according VDE 0110-1, EN 50178, IEC 60270 and IEC 60060).
-
Product
Thermal/Mechanical Testing
-
Accolade Engineering Solutions
As new products employ advanced materials and processes, the need to measure and characterize those material properties becomes increasingly important. DSC is used to measure heat flow in to or out of a material. Some DSC applications include measurement of melting temperature, polymorphic transitions, crystallization temperature, thermal stability, heat of fusion and degree of cure. TMA is used to measure dimensional changes of a material as a function of temperature.
-
Product
Usability Testing
-
Using our proven testing usability methodology, we deliver a 360-degree view on a product's operability by analyzing, identifying and benchmarking the weak spots in core features of the application and suggesting opportunities for improvement.
-
Product
Test Program Management
TP-M
-
TP-M utilizes TestInsight unique capability to read and analyze a whole test program from flow to every test pattern, timings, levels etc.
-
Product
Citrinin Testing Solutions
-
Citrinin is a naturally occurring fungal metabolite produced by several species of the genera Penicillium and Penicillium which causes kidney and liver damage. Citrinin has been found to be mutagenic in hepatocytes and has been implicated as a potential cause of human Endemic Balkan Nephropathy as well as porcine nephropathy. Because of concerns over citrinin contamination, Japan has issued an advisory limit of 200 ppb and the European Union has a recommended limit of 100 ppb.
-
Product
Shock & Drop Testing
-
Shock testing is often performed as part of a hardware qualification or design process. Information obtained during shock testing can improve the survivability of products as well as verify that they will perform properly in service. These types of tests require special transducers and measurement systems to record and process the high level, high frequency response.
-
Product
Protective Relay Test System
MTS-5100
-
The MTS-5100 is the only all-in-one relay test set with a direct front panel interface for all functions, without exception!
