Hall Effect Sensors
-
product
MPU- Passive Sensors
sensors of the MPU series are passive elements intended for measuring rotational speeds or speeds of moving parts. The measuring principle is based on voltage induction in the coil through a changing magnetic field, which is caused, for example, by a rotating ferromagnetic gear. The coil is wound on a magnetic core and led out via a cable or a plug. The sensors are manufactured with metric or inch threads or with a flange connection and deliver a sinusoidal output signal, the amplitude of which is proportional to the peripheral speed. They can be connected to Orbit Controls evaluation devices. An OC35-IMP transmitter is available for converting to square-wave signals.
-
product
SparkFun Pulse Oximeter And Heart Rate Sensor
MAX30101 & MAX32664 (Qwiic)
The SparkFun Pulse Oximeter and Heart Rate Sensor is an I2C based biometric sensor, utilizing two chips from Maxim Integrated: the MAX32664 Biometric Sensor Hub and the MAX30101 Pulse Oximetry and Heart Rate Module. While the latter does all the sensing, the former is an incredibly small and fast Cortex M4 processor that handles all of the algorithmic calculations, digital filtering, pressure/position compensation, advanced R-wave detection, and automatic gain control. We've provided a Qwiic connector to easily connect to the I2C data lines but you will also need to connect to two additional lines. This board is very small, measuring at 1in x 0.5in (25.4mm x 12.7mm), which means it will fit nicely on your finger without all the bulk.
-
product
Corona Effect Camera
CoroCAM 8
This model of the crown effect camera family is the most advanced on the market. It combines a high specification visible camera, an infrared camera and an ultraviolet camera. The great advantage is the possibility of performing thermal and ultraviolet inspection simultaneously with the consequent benefit in terms of savings (in time and effort).
-
product
Force Sensors
General purpose force sensors are offered in either stud or axial mounted configurations. They are internally pre-loaded and can be used for dynamic compression, tension, and impact force measurements. Tapped mounting holes on both ends of the radial connector style support link, platform, integrated link, and free-standing installations. The axial mounted type offers protection of the electrical connector and sensor cable from potential damage during drop testing and in free-standing installations. Supplied impact caps facilitate impact and drop force measurements.
-
product
MyoWare 2.0 Muscle Sensor
Using our muscles to control things is the way that most of us are accustomed to doing it. We push buttons, pull levers, move joysticks... but what if we could take the buttons, levers and joysticks out of the equation and control it with our muscles? The MyoWare® 2.0 Muscle Sensor is an Arduino-compatible, all-in-one electromyography (EMG) sensor from Advancer Technologies that allows you to do just that! The MyoWare 2.0 Muscle Sensor has been redesigned from the ground up with a new easy-to-use, compact design and upgraded with the latest and greatest chipset improving sensor performance and reliability. The innovative snap connector system eliminates the need to solder connections for the MyoWare 2.0 ecosystem. It's that easy: stick on a few electrodes (not included), read the output voltage and flex some muscles!
-
product
1.3 Million Pixel CMOS Image Sensor
Sapphire 1.3M
This 1.3 million pixel Sapphire CMOS image sensor, designed on Teledyne e2v’s proprietary Eye-On-Si CMOS imaging technology, is ideal for diverse applications where superior performance is required. The innovative pixel design offers excellent performance in low-light conditions with both electronic rolling shutter and electronic global shutter, with a high-readout speed of 60 fps in full resolution. Novel industrial machine vision application features such as multi ROI and histogram output are embedded on-chip. Very low power consumption enables this device to be used in battery powered applications.
-
product
Adjustable Range Reflective Photoelectric Sensor
EQ-30
Panasonic Industrial Devices Sales Company of America
The compact EQ-30 Adjustable Range Reflective Photoelectric Sensor is only 68 x 20 x 40mm but delivers amazing performance. Normal Reflective Type Sensors operate by sensing the variation in the amount of incident beam. However, the Adjustable Range Reflective Sensing Type Sensors, incorporate a 2-segment photodiode to sense variation in the incident beam angle. Thus, the output is activated according to the distance of the object from the Sensor. This system helps the EQ-30 Series to be unaffected by object color or a background, enabling stable sensing. The robust housing offers IP67 protection allowing the EQ-30 Sensor to be used in the most demanding industrial environments.
-
product
Level measurement with radar sensors
Radar sensors have long been used in level control because they provide reliable measurements even in conditions of dust, steam, smoke, extreme temperatures and strong pressure fluctuations. With OndoSense's innovative radar technology, level measurement is now possible for the first time with a measurement accuracy in the micrometer range in harsh environments.
-
product
Torque Sensors
Industrial-grade torque sensors and thrust cells for every application. Flange to shaft mount models, surface key mount models, shaft mount models, flange mount models, and more.
-
product
Soil Moisture & Temperature Sensor
Mini-Logger
The PlantCare Mini-Logger is a maintenance-free sensor which records soil moisture and soil temperature. A USB stick is used to easily program the mini-logger and readout the data. The PlantCare DataViewer Software allows a quick and easy display and analysis of the measured data. Fields of application are scientific research, agriculture and garden and landscaping construction.
-
product
Miniature LVDT Position Sensors
Miniature LVDTs are ideal where reliable measurements are needed in small spaces. With options for venting up to 30,000 psi, and temperature ratings to 400°F (200°C), these LVDTs operate in hydraulic equipment, embedded in robotics, and used in harsh downhole conditions.
-
product
Variable Reluctance Pressure Sensor Capable of Range Changes
DP15
An easy-to-replace pressure-sensing diaphragm maximizes the system's functionality by making pressure measurements from 2.22" H2O to 3200 psi in one compact unit. Rugged and reliable, the DP15 pressure sensor provides superior accuracy for measuring low-pressure liquids and gasses, while it withstands the abuse of field and laboratory testing. The ability to change full scale ranges make the DP15 a very cost effective solution for applications that need different pressure ranges or university labs.
-
product
Gas Flow Sensors
ESRF-HF Transmitter
The ESRF-HF is a family of mass flow transmitters which enable fast and accurate measurements of gas flow over a wide dynamic range. Each transmitter integrates a MEMS flow sensor and readout electronics inside a housing with very small form factor made from stainless steel. The duty pressure of the flow transmitter is 11bar. All measurement data are fully calibrated, and temperature compensated on board, leading to a reduced temperature coefficient and high measurement accuracy.
-
product
Carbon Sensor Conductivity Meter (Low concentration type)
HE-480C-GC
The length of the sensor has been reduced by 50% as compared to existing systems to reduce space requirements. At the same time, the measurement range has been increased tenfold, enabling the system to measure even samples with comparatively high concentrations. Two different types of chemicalresistant glassy carbon sensors can be used, making the system ideal for chemical dilution/recovery management and pure water recycling as well.
-
product
Sensors - Stand-Alone Loggers
Makes it possible to measure and record the transport conditions of goods and to trace shocks as well as temperature variations.
-
product
Optical Pick-up Sensor
TESCO has a pick up and disk sensors solution to meet your every need regardless of meter brand!
-
product
Standard Flexiforce Sensors for Force Measurement
FlexiForce
FlexiForce force sensors are ultra-thin and flexible printed circuits, which can be easily integrated into force measurement applications. These sensors are available for purchase in our online store.
-
product
MAX31855 K-Type Thermocouple Sensor Breakout
SEN-30003-K
Breakout board for the MAX31855K digital thermocouple interface ICs by Maxim. Measured temperature range is -270C-1372C with known thermal characteristics and output resolution of 0.25C. This sensor supports a larger operating range (specifically in the negative range) than its predecessors, the MAX6674 and MAX6675, though it is not pin-pin compatible. This board is interfaced with a 0.1" 2x5 pin header (8-pins used), has four vertical mini thermocouple connectors and four mounting holes for standoffs and 4-40 screws.
-
product
Self Contained Analog Output Displacement Sensors
SC-2440
* Self-contained electronics* Built-in temperature sensor* Fixed gain output* Reverse polarity and short circuit protection* No calibration required* Low cost* Excellent performance with ferrous targets* Variable voltage input from 15 to 30 volts DC* Compact and rugged, IP-67* Extremely low hysteresis
-
product
Wireless Sensor Tags & Interfaces
NFC and UHF RFID sensor tags offer a highly integrated solution for remote sensor data logging. The tags conform to the specifications of the NFC/ISO15693 as well as the UHF RFID standards. Featuring on-chip temperature sensing and the exclusive cool-Log™ technology, these sensor tags enable innovative and cost-sensitive solutions in food and pharmaceutical cold-chain management, industrial process control, remote monitoring and healthcare applications. NFiC™ ICs from ams lower the barriers to NFC integration in electronic devices thanks to their small footprint, high data rate, flexible data transfer modes, fully passive NFC tag emulation and advanced energy harvesting. NFC/HF interface tags are best suited to demanding consumer and industrial applications such as zero-power device configuration and set-up, feature-rich contactless cards for payment and authentication, smart toys and connected cars.
-
product
Distance Sensor Technology
Linear encoders
The MLFK linear measuring system works with linear contactless sensors according to the magnetic measuring principle, and is used for the positioning and measurement of distance and position as well as direction recognition. Thanks to its special features, it is ideal for cost-effective solutions in many industrial applications in plant and machine construction. Contact-less measuring technology is largely wear-free.
-
product
Robotic Finger Sensor V2
Does your robot crush objects with its hulkishly strong grip? Give your robotic hand or claw a better sense of touch with the Robotic Finger Sensor. This new version adds pressure sensing so now you can know how hard you're gripping!
-
product
Real-Time Ocean Sensor Network
Powered by the Sofar Spotter network: the largest real-time ocean sensor network in the world. Save on fuel and costs while leaving a smaller footprint on the planet.
-
product
Field Effect Rectifiers
ST field-effect rectifier diodes (FERD) help improve designs with new versions focusing on trade-off upgrades. Field-effect rectifier diodes belong to our STPOWER family. The design of the FERDs has allowed both a decrease in the voltage drop and a decrease in the leakage current temperature coefficient. As a result, the runaway safety margin is improved and maybe beyond the typical safety margin of Schottky barrier diodes.
-
product
EMI Shielding Effectiveness Testing
Eurofins E&E North America can easily develop sound engineering measurement techniques to quantify the SE of your product. Our process involves creating detailed SE Test Plans used to insure accurate and repeatable test results.Eurofins a has years of experience to assure our customers that the evaluation reflects the electrical attenuation performance of the material. Often times, our test report becomes supporting documentation for our customer’s end-user contractual requirement, where Independent Test Laboratory results verify the electrical performance of the material being tested.
-
product
EMP Sensor
This is a nice gimmick which detects EMPs (i.e. when lighting takes place). There are many sensors around, to detect all kind of things. However, detect lighting strikes is a complete different area. Use this sensor for :*Pre-warning systems*Digital photography*Domotics*Weather-station*Arduino experiments*School / scientific experiments
-
product
Strain sensors
SG-01
The Strain Gage SG-01 is the fibre optic equivalent of an electrical strain gage. The Strain Gage SG-01 can be mounted directly on the surface of a structure by means of an adhesive. In this way, the fibre sensor makes direct contact with the surface and therefore measures directly the strain at the surface.
-
product
Tilt Position Sensors
Available with any measurement angle between 15 and 160 the P603 tilt sensor operates a gravity driven, oil damped pendulum with a very low settle time and durable housing. Our tilt sensor has proved popular in marine applications because like our linear and rotary sensors we have used highly durable and corrosion resistant materials.We also offer the S623 which is waterproof sealed for continual submersion to IP68 350bar, 5000psi, 3500msw
-
product
PHOTOELECTRIC Sensor
PE2
● Wide range power supply for AC24~260V and DC12~260V● A wealth of models ideal for limit control, counting control, and other applications.● Sensing distance of 30~300cm for Diffuse reflective models, 3M~8M for Retro reflective models and 10M~20M for Through beam models.● Housing by PBT with strong structure and acid resisting.
-
product
Universal Differential pH Water Quality Sensors
SD7500CD
Continuous online pH monitoring in wastewater and coating industrial applications leads to contamination and eventually requires sensors to be replaced. A differential pH sensor utilizes a measurement technique designed to extend the working lifetime of sensors in challenging applications. Replacing the sensor reference (salt bridge) and buffered electrolyte solution can prevent sensor replacements, saving time and money. Our SD7500 Series features a combination sensor output; these differential pH sensors can be used with any conventional pH/ORP transmitter.
