Step Attenuators
-
Product
Step Probes (F732SP) F73211B1092G150SP
1025276
-
The F73211B1092G150SP Step Probe is engineered to deliver exceptional precision and reliability in a variety of demanding applications. Specifically designed with a pitch of 2.54 mm, this probe operates effectively across a temperature range from -45°C to +100°C. With its robust construction and advanced material selections, including a spring steel mechanism and a beryllium copper plunger with gold plating, the probe guarantees superior performance even under challenging environmental conditions. The specification of a continuous current capacity of 5.0 A and a typical contact resistance of just 20 mΩ ensures it meets the rigorous standards required for high-stakes electrical testing.
-
Product
Step Probes (F732SP) F73216B1023G300SP
1002319
-
The Step Probes (F732SP) F73216B1023G300SP represent the right solution for a vast array of applications, combining reliability with advanced engineering. With a pitch of 2.54 mm and a temperature tolerance ranging from -45°C to +100°C, these probes are designed to perform consistently even in demanding environments. Their robust construction ensures durability, making them suitable for various industrial needs.
-
Product
NI-5191, 800 MHz, ±30 V, 10X Attenuation, Differential Active Oscilloscope Probe
781785-01
Oscilloscope
The NI-5191 is a differential, active voltage probe that offers 800 MHz of input bandwidth with a 10:1 attenuation ratio. You can use it with oscilloscopes that provide 50 Ω input impedance. You can power the probe using a Type-N barrel power connector from a USB port or using a 9 V alkaline battery.
-
Product
Attenuators
-
OZ Optics offers a broad range of both variable and fixed attenuators having key competitive advantages. All of our attenuators operate over the two standard wavelength bands, the C-Band and the L-Band. This wide wavelength range makes these components ideal for DWDM applications. Our attenuators are wavelength insensitive, which means they operate with minimal changes in attenuation when used in either the C-Band or the L-Band and exhibit low return loss. In addition, all of our attenuators have a wide attenuation range, which means they operate at a wide range of power levels. This is important as increased power levels are being used in newer optical systems.
-
Product
Millimeter Wave Continuously Variable Waveguide Attenuators
-
Our millimeter wave variable waveguide attenuators allow designers and engineers to test their systems at various signal strengths and attenuation values to determine the optimum signal performance of the system. The key feature of these waveguide attenuators is that the attenuation level is adjusted using a built-in micrometer which enables repeatable and rapid re-setting to different attenuation levels without the need for additional external components. Our waveguide attenuators handle varying attenuation levels from 0 to 30 dB over the specified band allowing the designer to tune the attenuation level needed for the application. These continuously variable waveguide attenuators cover a broad frequency range of 33 to 110 GHz in five bands and also display flat performance across a wide band with low insertion loss.
-
Product
Step Probes (F732SP) F73211B0083G300SP
1000934
-
The Step Probes (F732SP) F73211B0083G300SP are engineered for precision applications, boasting a fine pitch of 2.54 mm (100 mil) suitable for various testing environments. With an operational temperature range of -45°C to +100°C, these probes hold up against extreme conditions while maintaining reliability and functionality. The Step Probes are designed to endure continuous current up to 5.00 A with a typical contact resistance of just 20 mOhm, ensuring efficient electrical conductivity and minimal thermal loss during operation.
-
Product
Step Probes (F733SP) F73316B1081G300SP1
1000900
-
The Step Probes (F733SP) F73316B1081G300SP1 are engineered for precision and high performance in challenging environments, capable of operating within a temperature range of -45°C to +100°C. Specifically designed with a 4.00 mm pitch, these probes provide exceptional contact reliability through their continuous current rating of 10.00 A and typical contact resistance of just 25.00 mOhm. This product is ideal for applications that demand accuracy and durability, thanks to its robust construction materials including a beryllium copper plunger and brass barrel, both plated with gold to ensure longevity and optimal conductive performance.
-
Product
Step Probe F73111B0034G100SP
1032527
-
The Step Probes (F731SP) with order code F73111B0034G100SP are precision components designed for high reliability and exceptional performance in various industrial applications. With a robust temperature range from -45°C to +100°C, these probes are engineered to withstand extreme conditions, making them suitable for use in diverse environments. Their innovative design features a 2.40 mm pitch and a preload force of 50 cN, ensuring accurate engagement and consistent performance during operation.
-
Product
Step Probe F73012B0010G110SP
1020783
-
The F73012B0010G110SP Step Probe is engineered for precise applications, designed specifically to cater to the needs of modern electronics testing. This model is compatible with F720SP and F730SP, ensuring versatility in its use. With a temperature range of -45°C to +100°C, this probe can operate in various environments, making it an essential tool for reliable performance in temperature-sensitive applications.
-
Product
Step Probes (F175SP, F176SP) F17611B0001G080SP
1031258
-
The Step Probes (F175SP, F176SP) F17611B0001G080SP are precision-engineered tools designed for demanding applications. With a pitch of 1.90 mm (75 mil), these probes can operate efficiently in a temperature range of -45°C to +100°C, ensuring reliable performance even in extreme environments. The probes are built with high-quality materials, featuring a Beryllium copper plunger with a gold plating, providing excellent conductivity and durability. Their robust design also includes a brass barrel, plated with gold, combined with a strong spring made from spring steel and silver plated to ensure longevity.
-
Product
Attenuator Assemblies
-
Any device designed to reduce the power of a wave or electrical signal without distorting it.
-
Product
Step Probe F73012B0004G110SP
1000578
-
The Step Probe F73012B0004G110SP is a highly specialized tool designed to deliver exceptional reliability in electronic contact applications. Specifically, this step probe is engineered to operate within a temperature range of -45°C to +100°C, making it suitable for various environments. Its robust design, featuring a precise 1.27 mm pitch, ensures compatibility with both F720SP and F730SP series. The probe's construction is optimized for performance, allowing for a continual current of up to 3A, while maintaining a typical contact resistance of only 50 mOhm. This functionality is essential for efficient signal transmission in sensitive electronic devices.
-
Product
RF Attenuators
-
Home > Products > Test and Measurement > AttenuatorsBird - The RF ExpertsRF AttenuatorsBird manufactures a broad spectrum of devices from 2 W to 4000W. Our resistive product portfolio includes air-cooled, water-cooled, oil-dielectric, convection cooled, and conduction cooled RF attenuators with a wide range of connectors and attenuation values.
-
Product
Step Probes (F731SP) F73116B0022G150SP
1025064
-
The Step Probes (F731SP) F73116B0022G150SP is engineered to meet high-performance demands in various technical applications. With a pitch of 2.40 mm, these probes excel in precision connectivity, operating effectively within a temperature range of -45°C to +100°C, ensuring reliability in extreme conditions. Not only are they designed for continuous current capacities of up to 5.00 A, but they also demonstrate an impressive typical contact resistance of merely 30.00 mOhm, which enhances overall system efficiency.
-
Product
Step Probe F75689B0006G150SP
1031685
-
The F75689B0006G150SP Step Probe is engineered for precision and reliability in a wide range of applications, featuring a robust design and high-performance specifications. This advanced probe operates within a temperature range of -45°C to +200°C, making it suitable for various environmental conditions. With a pitch of 2.54 mm and capable of continuous current handling up to 5 amps, this probe ensures efficient performance alongside low typical contact resistance of just 25 mOhm. The 4 mm nominal travel allows for effective actuation, while its exceptional pointing accuracy of +/- 0.08 mm guarantees precision in measurements.
-
Product
SMA Stainless Steel Fixed Attenuator
WK0602-06
-
Warison provides wide range of wireless passive coaxial components, includes Adapters, Attenuators, Coaxial Cables Assemblies, DC Blocks, Filters, Isolators & Circulators, Probes & Terminations. With outstanding capability of development and design, Warison is able to custom the spec based on customer��s demand. All Warison��s products pass inspection and electronic performance test before shipping out. It is our principal to deliver the best solution to all our clients.
-
Product
Step Probes (F731SP) F73112B9025G110SP
1028227
-
The Step Probes (F731SP) F73112B9025G110SP, identified by order code 1028227, is designed to deliver precision and reliability across a broad temperature range of -45°C to +100°C. These probe components feature a compact design with an overall length of 27.40 mm and a projection height of 8.90 mm, making them ideal for applications requiring careful measurements and high precision. The unique tip style diameter measures just 0.40 mm, while a collar diameter of 1.85 mm ensures stability during operation.
-
Product
Step Probes (F732SP) F73211B0029G150SP
1005697
-
The Step Probe (F732SP) F73211B0029G150SP is engineered for precision applications where exact measurements and reliability are crucial. Designed with a pitch of 2.54 mm, this probe operates effectively in temperatures ranging from -45°C to +100°C, making it suitable for various environments. It boasts a continuous current capacity of 5.00 A and a typical contact resistance of just 20.00 mOhm, ensuring stable performance in high-demand situations.
-
Product
Step Probes (F733SP) F73316B0071G300SP
1000978
-
The Step Probes (F733SP) model, designated under the order code 1000978, is a state-of-the-art testing solution engineered for precision and reliability. With a pitch of 4.00 mm, it operates efficiently within a temperature range of -45°C to +100°C, making it suitable for a variety of environments. The probe exhibits a continuous current rating of 10.00 A and a typical contact resistance of merely 25.00 mΩ, ensuring minimal power loss during operation. Coupled with its compact design and robust construction, this probe is ideal for high-performance applications requiring accurate and stable connections.
-
Product
Direct Reading Attenuator with Remote Control
DA2XE
-
DA2XE Millimeter-Wave Direct Reading Attenuator is a measurement instrument for signal level setting or loss measurements in waveguide networks. It also can be used for calibration of other attenuation measurement instruments. Direct Reading Attenuators have rotary-vane design. The value of attenuation is determined by rotation angle of resistive film with respect to the waveguide channel. Attenuation value does not depend on frequency. The attenuator has electronic control. The attenuator can be used in local or remote (via USB 1.1 or higher) operation modes.The Attenuators are provided in waveguide bands between 18 GHz and 225 GHz.
-
Product
Step Probes (F732SP) F73211B1054G150SP
1009066
-
The Step Probes (F732SP) F73211B1054G150SP are designed to provide exceptional performance with precise mechanical and electrical specifications tailored for advanced applications. With a pitch of 2.54 mm and a temperature range from -45°C to +100°C, these probes offer versatility in various environments. They are engineered to handle a continuous current of up to 5.00 A, with a typical contact resistance of merely 20 mOhm, ensuring efficient conductivity and reliable performance throughout their operational lifespan.
-
Product
Attenuation 100 High Voltage Passive Probe
-
Safe high voltage probe solutions for ground-referenced voltage testing. It is critical to safely and accurately capture real-time signal information from "elevated" or "floating" voltage systems.
-
Product
Step Probes (F733SP) F73316B1055G150SP1
1009915
-
The Step Probes (F733SP) are precision-engineered components designed to deliver outstanding performance in diverse applications. With a significant pitch of 4.00 mm and a broad temperature range from -45°C to +100°C, these probes are suited for rigorous environments. The sophisticated design parameters allow for a preload of 50 cN and a maximum travel of 5 mm, ensuring optimal functionality in varying conditions. Moreover, the 0.10 mm pointing accuracy highlights their precision, making them ideal for applications that demand reliability and accuracy.
-
Product
Step & Repeat Non-Contact Inspection System for FPC and PCB
OHT-Ⅴ
-
*Space-saving design and highly efficient and high-speed inspection, with top and bottom slider structure*Roller head enables to handle the reverse imposition.*Easy operation by new alignment mechanism*The machine handlingPCB is called "WSR"
-
Product
Step Probes (F732SP) F73211B1012G150SP
1025365
-
The Step Probes (F732SP) model F73211B1012G150SP is designed for precision and reliability in a variety of testing and measurement applications. With a pitch measurement of 2.54 mm and a temperature range from -45°C to +100°C, these probes offer versatility in environmental conditions, making them ideal for rigorous testing settings. The robust construction of the probes ensures they maintain integrity and performance under stress, thanks to the high-quality materials used, including a beryllium copper plunger with gold plating and a brass barrel, also plated in gold for enhanced conductivity and durability.
-
Product
Voltage Variable Attenuators To 16 GHz
-
Our family of voltage controlled attenuators is non-reflective, with ranges of 32 dB of 64 dB. Pin diodes are used and the frequency range is 0.25-16 GHz. They operate with a control voltage of 0 to +8 VDC and handle +27 dBm maximum input power. These attenuators are bi-directional: either SMA port may be used for an input.
-
Product
Attenuator Interconnect Kit, SMA
11716C
Interconnect Adapter
The Keysight 11716C quickly and conveniently connects 1 dB step and 10 dB step attenuators together to achieve greater dynamic range with 1 dB steps. The Keysight 11716C can be utilized to connect any of the two Keysight 8494/95/96 attenuators in series.
-
-
Product
Voltage Variable Attenuators
-
Analog Devices voltage variable attenuators (VVAs) ensure accurate control for a wide range of applications. Our absorptive VVAs are ideal for designs where an analog dc control signal controls RF signals levels over a 30 dB amplitude range, while our monolithic VVAs feature low insertion loss, high IP3, and wide dynamic range, as well as a balanced topology that delivers excellent return loss.
-
Product
HVFO10X +/-1V (1x Attenuation) Universal Tip Accessory
HVFO100-1X-TIP-U
-
HVFO10X +/-1V (1x Attenuation) Universal Tip Accessory.
