Product

Optical Light Source

CARY-LS300B

-

UC Instruments, Corp.

CARY-LS300B - UC Instruments, Corp.

The CARY-LS300B optical light source provide 1310/1490/1550 nm three outputwavelengths to meet specific application requirements. It is a idea solution for the fiberoptic network characterization, out-door network construction inspection and lab application.

Product

Realtime Analyzer Light

RAL

-

Yoshimasa Electronic Inc.

RAL - Yoshimasa Electronic Inc.

Quality sound measurement software equivalent to $10,000 hardware. Simple and easy-to-use RTA, Real Time Analyzer. For wide scope of audio and acoustics: car audio, home audio, concert hall and room acoustics, sound analysis and noise measurement.

Product

MECHANICAL TEST FIXTURE KITS

TX-MT-SERIES

-

Test-X Fixture Products

TX-MT-SERIES - Test-X Fixture Products

Test-X MT Series mechanical kits are an affordable solution to printed circuit board testing. With multiple configurations and available options, this product is sure to meet your testing needs. The MT Series features a hinged 3/8" FR4 probe plate, tooling holes for accurate drilling, and side handles for easy transportation.

Product

Broadband Xe Light Source

PowerArc

-

HORIBA, Ltd.

PowerArc - HORIBA, Ltd.

75W Xe Ozone free light source for UV-Visible-NIR applicationsThe PowerArc™ is a complete, integrated light source that includes power supply, starter, high efficiency collection optics and lamp housing in one compact package.

Product

Light Meters

-

Sper Scientific

Sper Scientific

Our light meters are designed for simple and accurate results in an industrial setting. Whether you are checking work spaces, parking lots, or baseball fields for safe levels of lighting or measuring for testing design compliance, a light meter from Sper Scientific will get the job done. Obtain precise UV, FC or Lux measurements, in multiple light measurement ranges. These light meters are designed for use in work spaces, labs, schools, outdoor studies, optics, home inspections, and many others. In addition, you may use these meters to check compliance with ANSI/NFPA 101 (standards for emergency & exit lighting).

Product

System Test Fixture

-

IST Engineering, INC.

IST Engineering, INC.

Chassis Level Test Fixture, Set Box Test Fixture, and more by IST Engineering

Product

Small ROV Light Series

LED-B-Series

-

Teledyne Marine Bowtech

LED-B-Series - Teledyne Marine Bowtech

The Teledyne Bowtech LED-B-SERIES light is designed for use on small ROVs, with favourable physical characteristics of 0.05kg weight and measuring only 54mm in length and a maximum diameter of 31mm, there is no limit to where this light can fit.

Product

Cabin Lighting for Aircraft

-

Astronics Corporation

Astronics Corporation

Enhance your passenger experience with Astronics’ innovative ambient cabin lighting, reading lights, and signage. For the safety of passengers and crews, our energy efficient emergency lighting systems ensure clear egress if necessary. All systems incorporate the newest technologies to provide economical operation, easy maintenance, and a low overall TCO.

Product

Light Sensors

-

ams-OSRAM AG

ams-OSRAM AG

ams provides the industry’s broadest portfolio of high-performance and high-sensitivity digital discrete and integrated module optical sensors.

Product

Multipurpose Ultra HD Low Light Camera

Quasar 4K Fixed Box

-

Teledyne FLIR

Quasar 4K Fixed Box - Teledyne FLIR

The Quasar 4K Fixed Box camera offers evidentiary detail, combined with a low light FHD camera for nighttime operations. Utilizing programmable schedules, the camera can switch from 4K UHD mode during daytime to 1080p Enhanced Low Light Performance mode at night, for optimal image capture based on the best scene resolution with sWDR.

Product

Light Monitor

LM-101

-

Eddy Co.

LM-101 - Eddy Co.

The LM-101 Light Monitor system provides an efficient and cost effective solution for monitoring coating thickness in real time. It consists of the LM-101 Light Monitor, LM-101A/AS light source, and Detector assembly.

Product

Light and Energy Meter

Model 659

-

OAI

Model 659 - OAI

UV Light and Energy Meter for use with all wafer steppers. For over 45 years, OAI is a world leader in UV Light and Energy Measurement Instrumentation used for reliable accurate calibrated control of the photolithography processes in the Semiconductor, MEMS, Wafer Packaging and Wafer Bumping Industries. The New Model 659 is an advanced UV exposure analyzer specifically designed for use with all wafer steppers including high intensity wafer steppers. This meter averages up to 400 exposure readings, has Ethernet and USB interface for downloading recorded measurements, and has intensity range of up to 7,500mW/cm2. Probes are available in wavelength of 365nm, 400nm, 420nm & 436nm. OAI has a complete certified calibration lab to maintain the performance, quality and reliability of our meters. The Model 659 meter is traceable to NIST standards.

Product

Fiber Optic Light Source

-

Huihong Fiber Inc

Huihong Fiber Inc

Fiber optic light source is a fiber optic test equipment to measure the fiber optic loss for both single mode fiber cable and multimode fiber cables; usually the fiber optic light source is used with the fiber optic power meters. This fiber optical light source can provide wavelength output according to the specific requirements including the 650nm red source, 1310nm/1550nm wavelength for the single mode fiber and 850nm/1300nm wavelength for the multimode fiber. Used together with our fiber optic power meter, they act as an economic and efficient solution for the fiber optic network works.

Product

Remote Docking Fixtures

-

Robson Technologies, Inc.

Robson Technologies, Inc.

RTI offers a variety of docking interfaces including our Standard OctoPogo series with interchangeable alignment plates to third party test fixtures. RTI has developed many complete interface solutions, including everything required to interface to various test systems.

Product

EBIRST 78-pin D-type Verification Fixture

93-006-101

-

Pickering Interfaces Inc.

93-006-101 - Pickering Interfaces Inc.

The 93-006-101 78-pin D-type Verification Fixture is an accessory for the eBIRST range of USB controlled test tools capable of performing automated path resistance tests on Pickering Interfaces switching solutions. The tool simply interfaces with the switching system's connector so a test can be run using the supplied Windows-based software.

Product

Function Test Fixtures

-

IST Engineering, INC.

IST Engineering, INC.

Modulized UUT BFT Test Fixture, Multilevel BFT Fixture, Over Clamp Test Fixture, Rack Mount Test Fixture, Self Contained Pogopin Test Fixture, Simple Low Cost PCBA Test Fixture, Tight Seal Required RF F/T Fixture, and more from IST Engineering

Product

Light Sources

LS 150 Xenon Arc Lamp Source

-

ABET Technologies, Inc.

LS 150 Xenon Arc Lamp Source - ABET Technologies, Inc.

Model LS-150 is a Patented US Pat. No. 8116017 low cost, high output 150 watt Xe arc lamp based light source. The entire source, power supply, lamp, and optical compartment are housed in an extremely compact enclosure, 9 x 6 x 11 inches. The unit's base allows mounting on inch or metric spaced optical tables with the optics centered over the hole pattern to allow for easy integration with the rest of your setup.

Product

Calibration Light Sources

-

Sciencetech, Inc.

Sciencetech, Inc.

An adjustable mount for Sciencetech''s line of calibration pen lamps.Power supply and pen lamp are not included. See the calibration sources brochure for more information.

Product

CO,CO,light and Sound Measurement

-

Testo AG

Testo AG

Everyone is exposed to different environmental influences in their day-to-day lives. For example, in an average workplace illuminance, sound level, and indoor air quality are all significant factors that influence people's performance and well-being. Testo offers suitable measuring instruments for controlling each of the measurement parameters of lux, sound, and CO2 (for indoor air quality).

Product

Flexible Pitch GND Fixture Clamps

GF-A

-

High Power Pulse Instruments GmbH

GF-A - High Power Pulse Instruments GmbH

*Compatible with GGB picoprobe model 10 replacement probe tips*<1 ns rise time (200 ps possible with 5 mm GND wire length)*Custom selectable GND wire length 5-15 mm*Gold-coated spring-steel clamp with micro-machined groove for locking of the clamps on the probe tip*High conductivity and low inductance copper HF litz wire with 200 x Ø 0.02 mm strands*Easy to use clamping*Tungsten carbide probe needle with 1 inch length, 15° taper and 7.5 µm tip radius

Product

Manual Fixture Kit With Mass Interconnect Cassette Interface, Max number of probes (2N) 1000 units, Max UUT 450 x 330 mm (wxd)

CMCSK-07-01

-

Columbia Elektronik AB

CMCSK-07-01 - Columbia Elektronik AB

Linear click system with ball bearings, using gas springs.10 mm ESD-proof top cover with aluminum reinforcement bars.Steel base cabinet with detachable aluminum back and bottom panels.Detachable interchangeable case system with an 8 mm spring-loaded probe protection cover.Base cabinet fitted with a telescopic guide rail and catch.