Product

MAX31856 Thermocouple Sensor Arduino Shield

SEN-30007-J

-

Playing With Fusion Inc

SEN-30007-J - Playing With Fusion Inc

Quad channel thermocouple Arduino shield based on the MAX31856 universal digital thermocouple interface IC. This is an exciting update of the MAX31855, with improvements in resolution (19 vs 14 bits), on-board temperature reference (6 vs 4 bits), and compensation (fully compensated vs nonlinear correction required). The MAX31856 is interfaced via 4-wire SPI with options for interrupt triggering. An LDO and a high-speed level shifter are included on ALL device pins to allow interfacing with to any Arduino - both 3.3V and 5.0V variants - without sacrificing device performance in any operating condition.

Product

Powerful and Cost Effective Spectroscopic Ellipsometer

Smart SE

-

HORIBA, Ltd.

Smart SE - HORIBA, Ltd.

The Smart SE from HORIBA Scientific is a versatile spectroscopic ellipsometer for fast and accurate thin film measurements. It characterizes thin film thickness from a few Angstroms to 20µm, optical constants (n,k), and thin film structure properties (such as roughness, optical graded and anisotropic layers, etc).The spectral range from 450 to 1000nm is measured in a few seconds and ellipsometric data are analyzed using the DeltaPsi2 software platform. The software integrates two levels of software to fulfil both routine analysis with predefined recipes and advanced analysis with state-of-the art ellipsometric modelling.

Product

Hall Effect DC Current Sensor

CYHCT-L20K

-

ChenYang Technologies GmbH & Co. KG

CYHCT-L20K - ChenYang Technologies GmbH & Co. KG

The sensor CYHCT-L20K is based on open loop principle and designed with a high galvanic isolationbetween primary conductor and secondary circuit. It can be used for measurement of DC current, DCpulse currents etc. The output of the transducer reflects the real wave of the current carrying conductor.

Product

RF Shielded Enclosure, 80dB Isolation Testing

QuietBox-80c/r

-

Raymond RF Measurements Corp.

QuietBox-80c/r - Raymond RF Measurements Corp.

The Raymond RF QuietBox-80c/r line of all-aluminum tabletop and rack mountable RF Shielded Cabinets offers effective RF isolation in a lightweight, fully-customizable package. Each QuietBox 80c/r is designed from the ground up to satisfy all the requirements of the client including enclosure dimensions, door swing and mounting style (tabletop or rack mount).

Product

Shield Boxes

-

Concentric Technology Solutions, Inc.

Concentric Technology Solutions, Inc.

CTS can provide a customized integrated RF Shield Box or RF Enclosure Test Solution for manual or automatic testing at an off-the-shelf solution price. Many companies make RF Shield boxes, RF Enclosures or DUT fixtures, but only CTS bridges the gap by providing a complete integrated RF Shield Box or RF Enclosure testing solution for providing the RF shielding needed for repeatability within your budget and schedule.

Product

Hall Effect Gear Tooth Sensors and Custom-Made Target Wheels

-

ChenYang Technologies GmbH & Co. KG

ChenYang Technologies GmbH & Co. KG

ChenYang Technologies GmbH & Co. KG supplies various kinds of Hall Effect Gear Tooth sensors (CYGTS101DC, CYGTS99, CYGTS211, CYGTS212, CYGTS99-198 etc.) for speed measurement with applications to machines, equipments, motorcycles, automobile industry and instruments etc. We are specialised in design, development and production of Hall-effect sensors and can offer also custom Hall sensors for your special applications.

Product

RF Shielded Box

LTL B5001

-

Liveon Technolabs

LTL B5001 - Liveon Technolabs

LTL B5001 RF Test Enclosure is the streamline solution to manage your RF Testings. LTL B5001 RF shielded test enclosure can comfortably house the intermediate device on test.LTL RF Enclosures are available in aluminum and stainless steel models and come with a specialized EMI gasket which enables stable and effective RF shielding performance in all frequency bands.

Product

Hall Effect Thickness Gage

Magna-Mike 8600

-

Olympus Corp.

Magna-Mike 8600 - Olympus Corp.

The Magna-Mike® 8600 is a portable thickness gage that uses a simple magnetic method to make reliable and repeatable measurements on nonferrous materials. Operation of the Magna-Mike is very simple. Measurements are made when its magnetic probe is held or scanned on one side of the test material and a small target ball (or disk or wire) is placed on the opposite side or dropped inside a container.

Product

Total Effective Irradiance Probe

LP471A-Uveff

-

Senseca

LP471A-Uveff - Senseca

The combined probe LP471A-UVeff measures the Total Effective Irradiance (W/m²) weighted according to the UV action curve (CEI EN 60335-2-27).

Product

RF Shielded Test Enclosure, Low Profile

JRE 1618

-

JRE Test, LLC

JRE 1618 - JRE Test, LLC

Like its other brothers in the JRE test line, it features rugged welded aluminum construction with superb RF shielding effectiveness. Long life door gasket material along with double edge engagement not only provides solid RF shielding, but smooth trouble-free operation over its lifespan.

Product

RF Shielded Box

TS7124

-

Rohde & Schwarz GmbH & Co. KG

TS7124 - Rohde & Schwarz GmbH & Co. KG

R&S®TS7124 RF shielded boxes enable reliable and reproducible measurements in shielded test environments. The R&S®TS7124 shielded box provides high shielding effectiveness, a good antenna coupling factor and a rugged mechanical design for reproducible results. RF test boxes have been designed not only for product designers or product optimization but also for production lines of wireless devices under test. The soft close feature makes the shielded box safer to operate.

Product

Shield

Arduino 4 Relays Shield

-

Arduino

Arduino 4 Relays Shield - Arduino

The Arduino 4 Relays Shield is a solution for driving high power loads that cannot be controlled by Arduino's digital IOs, due to the current and voltage limits of the controller. The Shield features four relays, each relay provides 2 pole changeover contacts (NO and NC); in order to increase the current limit of each output the 2 changeover contacts have been put in parallel. Four LEDs indicate the on/off state of each relay.

Product

Arduino Shields

-

Playing With Fusion Inc

Playing With Fusion Inc

Arduino shields are modular circuit boards that piggyback onto your Arduino to instill it with extra functionality.

Product

MAX31856 Thermocouple Sensor Arduino Shield

SEN-30007-K

-

Playing With Fusion Inc

SEN-30007-K - Playing With Fusion Inc

Quad channel thermocouple Arduino shield based on the MAX31856 universal digital thermocouple interface IC. This is an exciting update of the MAX31855, with improvements in resolution (19 vs 14 bits), on-board temperature reference (6 vs 4 bits), and compensation (fully compensated vs nonlinear correction required). The MAX31856 is interfaced via 4-wire SPI with options for interrupt triggering. An LDO and a high-speed level shifter are included on ALL device pins to allow interfacing with to any Arduino - both 3.3V and 5.0V variants - without sacrificing device performance in any operating condition.

Product

Split Core Hall Effect DC Current Sensor

CYHCT-C2TC

-

ChenYang Technologies GmbH & Co. KG

CYHCT-C2TC - ChenYang Technologies GmbH & Co. KG

This Hall Effect current sensor is based on open loop principle and designed with a split core and a high galvanic isolation between primary conductor and secondary circuit. It can be used formeasurement of DC current etc. The output of the transducer reflects the real wave of the current carrying conductor.

Product

19" Rackmount Drawer with Keylock, Shielded, 7"H x 20"D

DR-071920-K

-

ELMA Electronic, Inc.

DR-071920-K - ELMA Electronic, Inc.

Unshielded drawers are constructed of 20 ga. CRS and are furnished with ball bearing chassis slides to provide smooth operation. Available for 19" and 24" rackmount in 20", 24" and 30" depths, with or without a keylock