Product

Load Pull Test Fixtures

-

Maury Microwave Corporation

Maury Microwave Corporation

Low Insertion Loss for High VSWR TuningMultiple Connector Configurations50Ω and Transformers (Klopfenstein, Quarter-wave) AvailableHeatsinks and Fans AvailableCooling (Water cooling, Forced air cooling) AvailableIntegrated Biasing Available

Product

Exchangeable Test Fixture

MA 2112/D/H/S-7

-

INGUN Prüfmittelbau GmbH

MA 2112/D/H/S-7 - INGUN Prüfmittelbau GmbH

Parallel contact stroke: 15 mmContact force max.: 2000 NInterface block required: Test system sideInterface signals max.: 1190Component on PCB: 58 mmPressure frame unit-opening angle: 75Installation height test probe top: 16,0 mmInstallation height test probe bottom: 10,5 mmInstallation height dual-stage test probe bottom: 16,0 mmweight: 11,30 kg

Product

Test Hook Probe

CX-S11

-

Shenzhen Chuangxin Instruments Co., Ltd.

CX-S11 - Shenzhen Chuangxin Instruments Co., Ltd.

Test Hook Probe Used on enclosures prior to accessibility testing. The test hook is ¨hooked〃 into vents and seams in the enclosure & then pulled with a force (usually 20N).

Product

Atomic Force Microscope

HDM Series

-

Park Systems Corp.

HDM Series - Park Systems Corp.

The task of identifying nanoscale defects is a very time consuming process for engineers working with media and flat substrates. Park NX-HDM is an atomic force microscopy system that speeds up the defect review process by an order of magnitude through automated defect identification, scanning and analysis. Park NX-HDM links directly with a wide range of optical inspection tools, thus significantly increasing the automatic defect review throughput. In addition, Park NX-HDM provides accurate sub-angstrom surface roughness measurements, scan after scan. Park NX-HDM, together with its industry's lowest noise floor, and its unique True Non-Contact™ technology, it is the most accurate AFM for surface roughness measurement in the market.

Product

Automated Switch Test Equipment

-

TRICOR Systems Inc.

TRICOR Systems Inc.

TRICOR Systems Inc. offers test equipment for switches, keypads, rubber, etc. Virtually any component where accurate force-displacement and measurements are required. From our Model 933A, a low cost life test system to our Model 925 test station used to obtain precise force measurements relative to displacement; we have the system you require.

Product

Load Cells and Sensors

-

Lloyd Material Testing

Lloyd Material Testing

Our high quality load cells and sensors are used for materials testing and force measurement all over the world.

Product

Forced Air Cryogenic Cooling

FixTreme TE

-

DVTest Inc.

FixTreme TE - DVTest Inc.

FixTremeTE is a cost-effective standalone alternative to mechanical or forced air cryogenic cooling. When paired with a Testforce dbGuard Series RF shielding test enclosure, performing at temperature RF & microwave functional testing is simple.

Product

High Load Shear Strength Tester

HLST1000

-

Rhesca Co., Ltd.

HLST1000 - Rhesca Co., Ltd.

This tester measures the shear force required to analyze the bonding strength of various bonding materials. It is possible to measure shear force up to 5000N for the purpose of bonding strength evaluation over a large area. An optional heating unit enables evaluation while the sample is heated.

Product

Networkcontroller

-

Klocke Nanotechnik

Klocke Nanotechnik

A new set of motorized tables developed by Klocke Nanotechnik allows high strokes at small volumes. The modules are driven by the Nanomotor®. Loads of up to two kg can be moved over centimeters of stroke with down to 2 nm resolution. Manipulation in many degrees of freedom is possible without backlash. The modules NMT xx-L are longer, but thin like a pencil. In most of the NMT-modules position measurement systems can be included without increasing the size. The resolution of the position sensor is better than 10 nm. All NMT modules can easily be fixed onto each other. Very small connectors allow the exchange of a module without removing cables. The NMT-Zxx are modules for vertical movement. They have an internal load compensation to lift up loads. Nanomotor-Grippers and force sensors that can easily be fixed on these modules are available.

Product

Modal Exciters & Amplifiers

-

MB Dynamics Inc

MB Dynamics Inc

Experimental modal analysis, or modal testing, is a process for physically obtaining a math model of a structure’s dynamic properties. Modal tests identify a structure’s modal properties: natural frequencies, mode shapes, mass, stiffness and damping. Modal test results help troubleshoot resonant excitation from operating forces, validate and verify finite element models, predict the benefits of structural modifications, support design verification, and understand structural responses due to complex loading conditions.

Product

Multi Axis Load Cells

-

HITEC Sensor Solutions Inc.

HITEC Sensor Solutions Inc.

Multi-Axis Sensors are designed to measure a multiple of forces and moments simultaneously with a single load cell sensor. These sensors provide multiple bridges that precisely measure the applied force from one direction with little or no cross-talk from the force or moment.

Product

Torque Instruments

Advanced Force & Torque Indicator

-

Mecmesin Limited

Advanced Force & Torque Indicator - Mecmesin Limited

Used with a range of 'plug and play' torque and force sensors - ideal for 'static' or 'dynamic' (rotary) torque measurementCan be used as part of a Mecmesin test system or mounted to one of your own test rigs

Product

19-inch Rack Mount(2U) 20 Watts 80MHz to 1GHz Power Amplifier

-

Chengdu KeyLink Microwave Technology Co., Ltd.

Chengdu KeyLink Microwave Technology Co., Ltd.

20 Watts 80MHz to 1GHz amplifier in a compact 2U package for oversea market. It is a rack mountable-unit incorporating a universal voltage power supply and a built in forced air-cooling system. This amplifier subsystem utilizes LDMOS power device that provides excellent power density, high linearity, low distortion and wide dynamic range. The KB00810S43A SSPA is ideal for EMC testing to various industry standard as well as Broadband Communication.

Product

Extender

3690-15

-

VECTOR Electronics and Technology, Inc.

3690-15 - VECTOR Electronics and Technology, Inc.

​Contact fingers at the other end of extender card are gold plated provides low insertion force and positive contact with printed circuit boards.

Product

Cantilever type Probe Card / C type

CE Series

-

Japan Electronic Materials Corp.

CE Series - Japan Electronic Materials Corp.

*Standard Cantilever Probe Card*Low Contact force*Stable Contact*High accuracy of alignment*Suitable for variety of Devices

Product

Elongation Tester

SC-5

-

Shanghai Dean Electrical Co., Ltd

SC-5 - Shanghai Dean Electrical Co., Ltd

Executive standard: GB/T4074.3-2008/IEC60851-3; Inspection standard: JB/T4279.3-2008Used to test elongation (ductility) of copper wires covered with φ0.100-3.0 mmenamel, silk or other insulation materials and other metal wires with tensile strength ≤2000N;Application of SCM control allows for fast operation and strong anti-interference capacity;Preset elongation of samples with two-digit toggle switch and, when the preset value is reached during test, motor and counter would automatically stop action and display results;The instrument is capable of measuring elongation while also the tensile force and holding the maximum tensile force value during stretching;Clamps are designed according to characteristics of various wires to prevent samples from breaking at clamp jaws, easy to load samples and, after samples are compressed, enamel can be automatically broken;While sample is broken, movable clamp would automatically stop moving, with error between displayed and actual elongation value less than 1%;

Product

Load Frames

Multiaxial

-

MTS Systems Corp

Multiaxial - MTS Systems Corp

MTS multiaxial load frames deliver all of these advantages. Engineered for superior performance in a range of testing applications, these systems represent decades of industry expertise. They include a variety of servohydraulic load frame configurations that apply force along multiple axes simultaneously, replicating real-world materials and component service conditions with absolute precision and accuracy.

Product

Lo-PRO®file ZIF (Zero-Insertion-Force) Socket

Series 526

-

Aries

Series 526 - Aries

LO-PRO file Zero Insertion Force Socket. A choice of 24, 28, or 40 pin count devices can be inserted without bending or otherwise damaging the legs, since no force is required to either insert or remove the component from the socket. A metal cam provides strong, smooth action as it moves to a positive stop, compressing the double-sided contacts, ensuring a gas-tight seal.

Product

Strain Measurement In Holes

-

Baumer Electric AG

Baumer Electric AG

Cost-effective force measurement using strain probes.

Product

Electric Vertical Test Stand

WDW-L series

-

Jinan Testing Equipment IE Corporation

WDW-L series - Jinan Testing Equipment IE Corporation

Electric Vertical Test Stand is a tensile compressive test stand especially designed to match push-pull force gauge. This series pf electric vertical test stand has good stability, wide application range and is convenient to use. The electric vertical test stand has stepless speed-adjusting uniform motion, digital display of the testing speed and converting mode between manual and automatic operation. The vertical test stand is specialized for tension/compression test, insertion/withdraw test, fatigue test and fracture test.