-
Product
Automatic Flight Inspection System
AT-920DG
-
Airfield Technology is pleased to announce the availability ofa new product, the AT-920DG Automatic Flight InspectionSystem.The new AT-920DG system combines the unique groundbasedinspection capability of our original AT-920 with theproven DGPS positioning system and WinFIS flight inspectionsoftware from our larger, dual equipment AT-930DG system.
-
Product
Automatic Flight Inspection System
AT-950
-
The AT-950 is the easiest to use and the fastet performing FIS available.
-
Product
Technology of Global Market Leader
AeroFIS
-
Aerodata is the only manufacturer of Flight Inspection Systems with an in-house aircraft integration capability and can therefore assume full responsibility for the integrated performance of the aircraft and flight inspection equipment. As a European manufacturer with international recognition, we can provide unique capabilities for the supply of advanced flight calibration equipment with special consideration of compliance with both European (EASA) and US (FAA) regulations, equipment compatibility with neighboring countries, and highest levels of product support.
-
Product
Automatic Flight Inspection System
AT-930DG
-
Fully Automatic OperationAll-Weather CapabilityDifferential GPS Position ReferenceHigh Accuracy and Maximum ReliabilityWindows User Interface SoftwareEasy to Operate and Easy to LearnMinimum Maintenance RequirementsModular System ArchitectureLong-Term Supportability
-
Product
Automatic Flight Inspection Systems
AT-940
-
The AT-940 is a mobile and deployable flight inspection system providing high performance in the smallest possible package.
-
Product
Tool, Inspection Depth Gauge, Mini Coax, ITA
910121157
Inspection Tool
Used to verify the depth setting of the center conductor of the ITA mini coax contacts.
-
Product
4x 3U OpenVPX MOSA Flight Control Computer
SIU34-FCCVARM-01
Flight Control Computer
SIU34-FCCVARM-01 is a Modular Open Systems Approach (MOSA) DO-178C & DO-254 Certifiable Flight Control Computer (FCC) with low power high performance OpenVPX Xilinx UltraScale+ SBC with Quad Core ARM Cortex -A53, 8 GB DDR4 SDRAM, 32 GB SATA Flash, 2 x 10/100/1000Base-T Ethernet, USB 3.0, FIPS-140-3 Level 3 Cyber Security, and Single Event Upset support.
-
Product
Tool, Inspection Depth Gauge, Micro Coax, Receiver
910121179
Inspection Tool
Tool, Inspection Depth Gauge, Micro Coax, Receiver
-
Product
Tool, Inspection Depth Gauge, Mini Coax, Receiver
910121156
Inspection Tool
Used to verify the depth setting of the center conductor of receiver mini coax contacts.
-
Product
Dimensional Inspection (3D Inspection)
-
The 3D measurement data from our scanners and PCMMs offers a comprehensive definition of a physical object that is used for measurement, inspection, comparison and reporting. When a part is defined by millions of points, you can see subtle deviations, slight variations and fine details, which gives you the confidence that a part (or mold) meets your specifications. To deliver the best of both worlds, we combine 3D scanning with our contact, touch-probe measurement tools to deliver precise dimensions on geometric shapes.
-
Product
Can Inspection
-
Whether they are 14oz cans, 28oz cans, 12oz bottles, or some other size or format – they typically all look fine, as they fly by on your production line or sit on pallets ready to go out to customers. The challenge is, most companies have some kind of sealing issue at some point. Tops go on crooked, lids don’t seal, vacuums don’t set right – and it’s nearly impossible to tell by physical or visual inspection.
-
Product
LIDAR & Direct Time of Flight
-
LIDAR (Light Detection and Ranging) is a sensor technology for remote object detection and ranging, using a light source and receiver. Emitted light pulses hit objects, reflect, and return to the LiDAR sensor system where the receiver detects the returning light pulse.
-
Product
Time-of-Flight Camera
-
The Basler Time-of-Flight (ToF) Camera provides high resolution 3D images at a very attractive price/performance ratio. It delivers 20 frames per second with VGA resolution and has a working range of 0 to 13 meters.
-
Product
Tool, Inspection Depth Gauge, Micro Coax, ITA
910121180
Inspection Tool
Tool, Inspection Depth Gauge, Micro Coax, ITA.
-
Product
Inspection Bundle
-
Cost effective bundle of eVision's inspection librariesIncludes EasyImage, EasyGauge, EasyMatch, EasyObject and EasyColor
-
Product
Inspection Tool
AMI DF2400
-
Automated In-line Inspection Tool for Defect-Free Production Without Sacrificing Throughput. The FACTS² delivers state-of-the-art, automated in-line inspection for quality and process control.
-
Product
Pipeline Inspection
-
Radiodetection and Pearpoint provide a wide array of Pushrod and Crawler pipeline inspection systems.
-
Product
GCxGC Time-of-Flight Mass Spectrometer
PEGASUS® BT 4D
-
The Pegasus BT 4D offers enhanced sensitivity by coupling our benchtop Pegasus BT with our high performance GCxGC thermal modulation system. This combination gives the Pegasus BT 4D the ability to interrogate challenging samples where the best sensitivity is needed. Unique and powerful software and hardware features simplify quantitation, while also dramatically making GCxGC easy to use and understand.
-
Product
ST VL6180X Time of Flight Sensor
SEN-36001
-
Highly integrated breakout board for the ST Micro VL6180X Time of Flight (ToF) range finder sensor. This sensor has many uses in the robotics, cell phone and gesture recognition space. It has two programmable GPIO pins, and most importantly, measures absolute distance up to 100mm. The SEN-36001 includes a VL6180X IC centered between two 4-40 sized mounting holes with onboard 2.8V LDO and voltage translation to handle interface voltages from 3V to 5V. The board is interfaced via an I2C interface and all IC pins have been broken out to a 0.1" pin header. Example code for the Arduino platform is available below and includes code for both the proximity measurement and ambient light sensing capabilities.
-
Product
Airborne Network Flight Recorder
TTC nREC-4000S
-
Curtiss-Wright Defense Solutions
The TTC nREC-4000S-2 is an intelligent IP flight recorder. The unit records data from network-based data acquisition and multiplexing devices and, with built-in intelligence, supports extensive recorder statistics and provides continuous health monitoring.
-
Product
Flight Instruments & Gyro Department
-
Aero Instruments & Avionics, Inc.
The Flight Instruments & Gyro Department offers complete functional testing, repair and overhaul of most instruments & gauges located within the aircraft cockpit, and the associated computers that control them.
-
Product
Macro Inspection
-
High-throughput automated macro inspectionAny wafer size, in less than one second with ~75 micron resolutionSmall footprint table-top system
-
Product
Battery Inspection
-
We design, develop and manufacture X-ray solutions specifically for battery cells. At Exacom we stand for passion, innovation, out of the box thinking, honesty and reliability, as well as speed and a hands on mentality.
-
Product
Inspection
-
A complete line of testing instruments for inspection laboratories is available from our Petrolab group. We specialize in instruments for vapor pressure, flashpoint, distillation, and color as well as equipment for hundreds of other ASTM, ISO, and DIN testing procedures. Below are a handful of items we offer.
-
Product
ST VL53L0X Time-of-Flight Range/Distance Sensor
SEN-36003
-
Highly integrated breakout board for the ST Micro VL53L0X Time of Flight (ToF) range finder sensor, which builds on the absolute ranging technology introduced with the VL6180X. The VL53L0X drops the ambient light sensing capability of it's predecessor for a 10X improvement in absolute ranging capability, bringing the maximum possible range to 2 meters! As a result, this sensor has even more uses in the robotics, cell phone and gesture recognition space. The SEN-36003 includes the VL53L0X IC mounted between two 4-40 sized mounting holes with on board 2.8V LDO and high-speed signal translation to handle interface voltages from 3V to 5V. The board is interfaced via an I2C interface and function pins have been broken out to a 0.1" pin header. All pins are translated to allow interfacing with any microcontroller in the 3V to 5V operating range.
-
Product
Value Inspection Cameras
-
General's Value Inspection Cameras offer excellent savings on certain Inspection Cameras such as the DCS280 Rugged Video Inspection System & the KT280 Professional Inspection Kit. Take a look & see if one will meet your needs.
-
Product
Flight Deck Power Systems
System
Multiple EmPower products are already a standard linefit option on Boeing and Airbus. Astronics flight deck power systems are modular in design and available in 110VAC, high power USB (10W), and the latest USB power delivery technology - USB Type-C (60W).
-
Product
High-Voltage Time-of-Flight Pulsers
-
Are high-voltage pulse generatorscapable of driving 50 (or higher) loads and operating over a wide pulse width range. The instruments include IEEE- 488.2 GPIB and RS-232 interfaces. For diode loads, thesemodels can be used to provide up to 1, 2, 4, 5 or 8 Amps of pulsed current if the diode is connected in series with 50. All models operate over a wide pulse width range of 100 nsto 100 us.
-
Product
Test & Inspection
-
Our test and inspection products support maintenance, product quality testing, diagnostics, and quality control. The extensive range of products covers almost any application need you to have.
-
Product
Specialist Inline Inspection
-
NDT Global treats each pipeline individually from the offset. Before a project even begins, a feasibility study of the pipeline detail is conducted by NDT Global, to determine the appropriate tool and required modifications to complete the inspection. NDT Global has an extensive engineering capability in this regard and has a proven track record in providing tailored solutions to deal with a wide variety of pipeline characteristics.
