ASI
See Also: Transport Stream, Transport Stream Analyzers, ATSC, ISDB, H.264, DVB, MPEG, SMPTE
-
Product
Octal ASI Ports for PCIe
DTA-2178-ASI
-
Eight bi-directional ASI ports on a low-profile PCIe card at a price of about €100 per channel. Each port is configurable from software as input or output.
-
Product
Quad ASI To IP Conversion Module
DTM-3224
-
The DTM-3224 is a highly-integrated and cost-effective OEM module for converting four ASI transport streams to IP. The next-generation architecture of this device has support for IPv6 and for IGMP v3, enabling source-specific multicast.
-
Product
Standalone IP To ASI Converter
DTE-3100
-
DekTec's standalone power-over-ethernet enabled IP to ASI Converter, allowing zero-jitter transmission of Transport Streams coming from IP networks.
-
Product
Eight 12G-SDI/ASI Ports for PCIe
DTA-2178
-
High density, attractive price. Eight ports that can do SD to 3G, and ASI, in any mix. Ports 1 and 5 can receive or transmit full 12G-SDI to stream two times 2160p50/60. Each port can scale 4K to 2K, enabling the monitoring of eight 12G-SDI signals.
-
Product
FantASI ASI/SD-SDI Input+output For USB-2
DTU-245
-
DekTec's classic and iconic portable ASI adapter for USB bus, ideally suited for use with a laptop, but convenient with a standard PC or server too. More than ten years on the market and still the essential tool for every DTV engineer!
-
Product
OEM Module For Conversion Between IP And ASI
DTM-3200-RA
-
The DTM-3200 converts IP to ASI, or ASI to IP. Integrate this compact module to extend the range of I/O standards supported by your product. Technical highlights include advanced IP-jitter filtering, ultra-low latency and zero-jitter IP transmission.
-
Product
GigE And 3x ASI Ports For PCIe
DTA-2160
-
DekTec's Gigabit Ethernet adapter with three ASI/SDI ports, allowing zero-jitter transmission and reception of Transport Streams over IP networks; the additional three ASI ports allow easy conversion between the two interface types.
-
Product
Dual DVB-ASI Output For PCI
DTA-105
-
DekTec's two-ports ASI output adapter, with slave-capabilities to output a single doubly-buffered output to two ports.
-
Product
IP Video Stream Analysis And Monitoring
TSM100
-
The Mividi TSM100 is an MEPG transport stream analyzer and IP video monitoring system for monitoring the quality of digital video services (QoS) delivered via IP or ASI interfaces. It can simultaneously monitor up to 300 services and perform deep MPEG analysis and video quality check 24 x 7. The system can be used for analyzing MPEG-2, H.264 and HEVC programs delivered over the Internet, as well as head-end equipment that uses IP for video transmission. The TSM100 provides IP layer analysis, MPEG transport layer analysis, key frame decoding, audio loudness measurement and service profiling. The system receives IP encapsulated digital audio and video data via 1 Gbits or 10Gbits Network adaptor. It will monitor all media flows in the network, perform extensive tests on standard compliance and user profile matching, and generate alarms when TS, video or audio errors occur.
-
Product
Piezo-Z Top Plate
PZMU-2000
-
Applied Scientific Instrumentation
The PZMU-2000 is a precise piezo Z-axis stage that can be attached to the top of a microscope's existing XY stage or be used in stand-alone applications. On select models of microscopes, ASI can mount a PZMU-2000 to an OEM stage. We can procure a manual OEM stage for you if necessary.
-
Product
Advanced Monitoring Probe
DVB-C QAM
-
Combined with a Network Monitoring System or not, the EdgeProbe Advanced provides a powerful broadcast network alert & diagnosis tool allowing DTV network operators to monitor global trends and anticipate potential failures.EdgeProbe Advanced is able to monitor DVB-C and DVB-C2 signals at transmitter outputs, through its RF inputs (up to 4 in 1RU), as well as at modulator input and at Head-End/distribution links, through its ASI and IP inputs.
-
Product
IP Gateway
3507Rx
-
Hangzhou Softel Optic Co., Ltd.
SFT3507Rx IP to ASI Gigabits gateway is a head-end interface device which is used for DVB ASI and Ethernet . As a kind of IP receiver, this device can recover UDP database received from the transporting device into TS stream and then output it through the ASI output interfaces. Moreover, it has the function to resist the IP transporting jitter, and to restore the PCR of the TS stream. This device can maximum receive 12 channel IP and output 12 ASI, also, it can simultaneously transmit the 12 IP stream into 12 TS stream.
-
Product
Fail-Safe Inductive Sensors
-
*Certification to EN 60947-5-3 for electromechanical controlgear*Ensuring operator and machine safety*No special actuator for electronic fail-safe sensors required*Connection to safety plc or safe AS-i module*Series connection of sensors and contacts possible
-
Product
Quad ASI/SD-SDI Ports For PCIe
DTA-2144B
-
Industry-standard PCIe card for professional PC-based applications that require ASI inputs and/or outputs. Features include flexible receive and transmit modes, arrival timestamping and false-sync pass through for full TR 101 290 analysis.
-
Product
Safety Network (AS-i Safety at Work)
-
*Monitoring of up to 31 safe AS-i slaves*Applications: door monitoring, light curtains, e-stop, two-hand control*Safe AS-i modules for field applications and control cabinets*Safe AS-i door switches with guard locking and guard lock monitoring
-
Product
Gateway Inverse Function
InverTS
-
InverTS is ENENSYS’ DVB-T2 Gateway inverse function that de-encapsulates a T2-MI stream into one or several MPEG-2 Transport Streams over ASI and IP.The InverTS is designed to receive a single PLP or Multiple PLP T2-MI stream over ASI or IP in order to de-encapsulate the T2-MI stream into one or several MPEG-2 TS over ASI and IP. It outputs the MPEG-2 TS encapsulated by a DVB-T2 Gateway.The InverTS can also apply to a lot of use cases wherever applications require to retrieve the genuine and multiple MPEG-2 TS that are carried over the T2-MI stream. It can be operated for re-multiplexing a DVB-T2 stream with regular TS content or for simulcasting the same content over different networks.The InverTS is the ideal product to help monitoring a T2-MI stream either using its optional internal advanced monitoring tools or by connecting it to existing monitoring tools through ASI or IP. The Advanced monitoring option enables to supervise in real-time PLP bandwidth allocation, DVB-T2 transmission parameters and the MPEG-2 TS encapsulated within the T2-MI stream.
-
Product
Encoder-Modulator
SFT3543D DVB-S/S2X
-
Hangzhou Softel Optic Co., Ltd.
SFT3543D DVB-S/S2X Encoder & Modulator is an integrated device with multifunction. Its pluggable design makes it convenient to change encoding module (CVBS/SDI/HDMI/YPbPr…) as needed. It is also equipped with 1 channel ASI input. It outputs ASI and DVB-S/S2X RF (IF Optional) in the same time.
-
Product
Fully Compliant ASi-5 Transceiver ASSP
ASI4U-V5
-
The ASI4U-V5 is the industry’s first silicon solution to fulfill the ASi-5 (Actuator-Sensor-Interface version 5) standard for industrial network equipment that enables comprehensive Industry 4.0 applications. The ASI4U-V5 ASSP comes with a completely verified and field-proven firmware that fully implements ASi-5. Hence, integration of ASi-5 into any application is very easy, as the complexity of the fieldbus is hidden by the chip and the firmware.
-
Product
AAA Solar simulator
SS50AAA-PLC
-
Application ■Mono crystalline silicon (Si) ■Multi crystalline silicon (mc-Si) ■Amorphous silicon (a-Si) ■Gallium arsenide (GaAs) ■Gallium indium arsenide (GaInAs) ■Gallium aluminum arsenide (GaAlAs) ■Gallium indium phosphite (GaInP)
-
Product
MultiStandard Advanced Monitoring Probe
EdgeProbe Advanced MultiStandard
-
The ideal tool for accurate & cost-effective monitoring probe for:DTV terrestrial transmission (DVB-T/T2, ISDB-T/Tb)DTV cable transmission (DVB-C/C2)DTV distribution over satellite (DVB-S/S2, T2-MI, OneBeam, MPTS)DTH uplink and reception (DVB-S/S2, MPTS)Digital Radio transmission (DAB/DAB+/T-DMB)Combine any two RF standards in one single 1RU device.Combined with a Network Monitoring System or not, the EdgeProbe Advanced provides a powerful broadcast network alert & diagnosis tool allowing Digital TV & Radio network operators to monitor global trends and anticipate potential failures.EdgeProbe Advanced is able to monitor the RF signal, through its RF inputs (up to 4 in 1RU), as well as the baseband transport before modulator, through its ASI and IP inputs.
-
Product
Compact Monitoring Probe
ISDB-T/Tb
-
Network operators:automate the tests of new transmittertemporary monitoring/investigation toolrebroadcasting receiver: RF to ASI or IPBroadcasters: off-air monitoring probe to validate the on-air contentTV/STB producers: automated tests against a professional receiverLabs: easy & simple access to live DTV sources via RF
-
Product
Valve Position Sensors
-
*Dual inductive sensor for pneumatic actuators and valves*Designed for simple fit to common actuators based on VDI / VDE 3845*Quick and easy installation of the AS-i dual sensor*Position feedback for rising stem valves with up to 80 mm stroke*Reliable permanent valve monitoring
-
Product
OEM Module For Conversion Between IP And ASI
DTM-3200
-
The DTM-3200 converts IP to ASI, or ASI to IP. Integrate this compact module to extend the range of I/O standards supported by your product. Technical highlights include advanced IP-jitter filtering, ultra-low latency and zero-jitter IP transmission.
-
Product
Modulator
SFT3403F
-
Hangzhou Softel Optic Co., Ltd.
SOFTEL SFT3403F is a high-performance modulator developed according to DVB-S2X (EN302 307-2) standard which is the standard of third generation of the European broadband satellite telecommunication. It is to convert the input ASI and IP signals alternatively into digital DVB-S/S2/S2X IF output. BISS scrambling mode is inserted to this DVB-S2X modulator, which helps to safely distribute your programs. It is easy to reach local and remote control with NMS software and LCD in the front panel. With its high cost-effective design, SOFTEL SFT3403F DVB-S2X IF modulator is wildly used for broadcasting, interactive services, news gathering and other broadband satellite applications.
-
Product
DVB-S2 Satellite Receiver
DTE-3137
-
DekTec's standalone power-over-ethernet enabled DVB-S2 Satellite Receiver, allowing reception of the full Transport Stream and transmit it to IP and ASI networks.
-
Product
GigE And 3x ASI Input/output For PCI
DTA-160
-
DekTec's Gigabit Ethernet adapter with three ASI/SDI ports, allowing zero-jitter transmission and reception of Transport Streams over IP networks; the additional three ASI ports allow easy conversion between the two interface types.
-
Product
Microscope Platforms
-
Applied Scientific Instrumentation
ASI Modular Microscope components consist of tube lenses along with adapters and accessories that either are primarily used in the collimated light space or adapters that are to be used on the image side. Collimated light adapters use the 38 mm diameter C60-RING system to connect components. Focus-side adapters attached to lens tubes with either a 30 mm diameter coupling to the I.D. of the C60-TUBE, or with a 50 mm coupling on the O.D. of the lens tube.
-
Product
ASI Test Equipment
-
ASI has designed its own line of aviation electronics test equipment utilizing modern design and manufacturing techniques. Being primarily a service facility, ASI is able to identify what type of test equipment is required in the avionics field from a service technician's view. This equipment is designed with the technician in mind, for ease of operation and maintenance.
-
Product
SAT/CATV/TV Signal Analyzer
DSA 1491
-
9” full-color, high-resolution touch screen user interface simplifies complex measurement tasksRF inputs including satellite, cable and terrestrial along with ASI and IP inputsDigital RF measurements including average power/level, pre/post BER, MER, noise margin, spectral analysis and constellation
-
Product
HD-SDI/ASI Input+output With Relay Bypass For PCIe
DTA-2175
-
A general-purpose HD-SDI input and output, both ASI capable. A relay automatically connects input port to output port upon software- or hardware failures, enabling highly-available system configurations without requiring a failover switch.





























