Product

Managed Ethernet Switch with L2/L3 Layer Support and Fiber Optic Option

ES2

-

North Atlantic Industries

ES2 - North Atlantic Industries

Ethernet Switch module, ES2 provides up to 16 10/100/1000 Base-T 1 Gb ethernet ports. Additionally, there is one 10/100/1000 Base-T maintenance port interface, one RS-232 maintenance/console port interface, and a Fiber-Optic channel with four 10 Gb ports. It also provides numerous L2 and L3 networking, quality of service (QoS) and security features available as described below.

Product

Transceiver Module

-

Mornsun Guangzhou Science & Technology

Mornsun Guangzhou Science & Technology

MORNSUN transceiver modules include integrated high efficiency CAN, RS485, RS232 isolated transceiver module, protocol conversion module and serial port to ethernet transceiver module. These industrial bus transceiver with DIP, SMD, SOIC and DFN optional packages features compact size, surge and ESD bus protection, a maximum isolation voltage up to 5,000 VDC and a wide operating temperature range of -40°C to 85°C, even up to 105°C, etc. Coupled with the use of IC integrated technology,  the isolated transceiver module can easily be embedded in the user's end equipment, and achieve fully-functional bus network connectivity and data communication. Check out these isolated transceiver modules with a reasonable price along with high performance and we hope that they are an ideal fit for your application needs.

Product

Optical Oxygen Sensors

-

Process Sensing Technologies

Process Sensing Technologies

PST offer a range of factory calibrated optical oxygen sensors which measure trace and ambient oxygen levels using luminescence-based optical technology.The patented technology allows the range of sensors to produce low power operation, while offering a long lifetime.

Product

Fourier Transform Optical Spectrum Analyzer, 600 - 1700 nm

OSA202C

-

Thorlabs, Inc.

OSA202C - Thorlabs, Inc.

Thorlabs' Optical Spectrum Analyzers (OSAs) perform highly accurate spectral measurements. Compatible with fiber-coupled and free-space light sources, these compact benchtop instruments suit a wide variety of applications, such as analyzing the spectrum of a telecom signal, resolving the Fabry-Perot modes of a gain chip, and identifying gas absorption lines. Many commonly available OSAs use grating-based monochromators, which have slow acquisition times due to the need to mechanically scan the grating and average out noise at each wavelength. Thorlabs' OSAs acquire the spectrum via a Fourier transform using a scanning Michelson interferometer in a push/pull configuration. This approach dramatically improves the acquisition time, enables a high-precision wavelength meter mode with 7 significant figures and ±1 part-per-million accuracy, and allows the included software to provide robust statistical analysis of the acquired spectra, as explained in the Design tab.

Product

8-Port Serial Interface, Modular, With/Without Optical Isolation, 3.3V/5V

APCI-7800-3

-

TEAM SOLUTIONS, INC.

APCI-7800-3 - TEAM SOLUTIONS, INC.

8-port serial interface, RS232, RS422, RS485, 20 mA CL, modular mounting

Product

Fiber Coupler Diode Laser

CAWS-XX

-

UC Instruments, Corp.

CAWS-XX - UC Instruments, Corp.

* High Power，High Efficiency* Coupling efficiency ≥80%* Standard fiber connector type* Lifetime > 10000h

Product

RS422 Mode SI-module With Optical Isolation And RTS/CTS

MX422-PEP

-

TEAM SOLUTIONS, INC.

MX422-PEP - TEAM SOLUTIONS, INC.

RS422 mode SI-module with optical isolation and RTS/CTS

Product

PC Control UV-NIR Optical Spectrum Meter

NI4000

-

UC Instruments, Corp.

NI4000 - UC Instruments, Corp.

NI4000 PC control UV-NIR optical spectrum meter was designed to provide full spectral output throughout the 200-1100 nm range, with best efficiency at 200-1050 nm.

Product

Optical Coordinate Measuring System

MaxSHOT 3D

-

Creaform Inc.

MaxSHOT 3D - Creaform Inc.

Creaform’s MaxSHOT 3D lineup is a game changer for product development, manufacturing, quality control and inspection teams that need the highest measurement accuracy and repeatability as much for large‑scale projects than parts from 2 to 10 m. Imagine achieving accuracy better than 0.015mm/m! Thanks to its sophisticated user guidance technology and easy‑to‑use software, the MaxSHOT 3D is ideal for users of all levels—even non‑metrology experts—so that you gain peace of mind knowing your measurements are always right on the dot and you increase process efficiency. If you consistently work on large‑scale projects, the MaxSHOT 3D is your go-to solution to slash budget-busting measurement mistakes, improve product quality, increase process efficiency—and minimize overall operating costs.

Product

Custom Optical Components and Standards

-

Applied Image, Inc.

Applied Image, Inc.

With the amount of applications that optical components have, no one could hope to have the perfect component for every possible scenario. For this reason, APPLIED IMAGE makes easy the process of designing, building, and delivering custom components to our customers. Our engineering process is designed to produce the best parts in the industry and more importantly, the best component for your specific needs. The APPLIED IMAGE experience will cover the project with expert engineers from start to finish. Use the form below to start the conversation for checkerboard and dot arrays, stage and image analysis micrometers, reticles and machine vision components.

Product

Optical Radiation Meter

ORM400

-

Bentham Instruments Ltd

ORM400 - Bentham Instruments Ltd

The ORM400 Optical Radiation Meter has a USB 2.0 interface and is supplied with powerful calibration features and data display functions. It is ideally suited to display the measurements from the DH400 range of detectors as well as third party current generating detectors.

Product

Optical Loss Test Set/Light Source/Optical Power Meter

-

Anritsu Corporation

Anritsu Corporation

The CMA5 series (Optical Loss Test Set/Light Source/Optical Power Meter) offer superior accuracy and reliability for evaluating a wide range of optical devices and systems including WDM.

Product

Absolute Optical Encoder

A2

-

U. S. Digital

A2 - U. S. Digital

Product DescriptionRestriction of Hazardous SubstancesThe A2 absolute encoder is a non-contacting optical rotary position sensor which reports the shaft angle within a 360 deg. range. As opposed to incremental encoders, the A2 reports the absolute position rather than the change in position. When powered up, it does not require a home cycle, even if the shaft was rotated while the power was off. In multi-turn mode, it tracks the position in a 32-bit counter as long as the power supply is maintained. Internally, an infrared LED flashes through a circular bar code onto a linear array sensor. The microcontroller decodes the image into a unique position. All user programmable parameters such as resolution, origin, direction and mode are permanently stored in an internal EEPROM

Product

Fiber Optic Power Meters

FOD1204H

-

Fiber Optic Devices Ltd.

FOD1204H - Fiber Optic Devices Ltd.

The FOD 1204 & FOD 1204H Fiber Optic Power Meters are intended for accurate measurements of up-to-date optical communication. Very small temperature and temporal variations of Loss in Fibers and Connectors. Calibration of Optical Attenuators, Light Sources etc.

Product

ALC (AGC) FTTB Optical Receiver

BG9244PL

-

Hangzhou Huatai Optic Tech. Co., Ltd.

BG9244PL - Hangzhou Huatai Optic Tech. Co., Ltd.

Huatai BG9244PL product series have the bandwidth of 47~862MHz,with ALC (AGC) function, two outputs, the output level Vo=104dBμV (Pin:-7~+2dBm). The device has built-level gain and equalization adjustment, visual display about optical power, and can choose 1way or 2 ways high level output by illustration. It applies to FTTB optical access to network, is an ONU optical receiver unit of RFTV radio network with low power, high performance, high cost- effective.

Product

Scanning Near Field Optical Microscope

SNOM

-

A.P.E. Research

SNOM - A.P.E. Research

SNOM microscopes employ SPMs precision of piezoelectric raster-scanning together with sharp probes to obtain light optical images at rather better than the usual wavelength-limited resolution. The possibility to go beyond the Abbe diffraction limit has been achieved with the Near-field light optical microscopes (SNOM or NSOM).

Product

Optical & Vision Systems

-

Fowler High Precision, Inc.

Fowler High Precision, Inc.

Usually made up of every component that is needed to acquire and analyze an image in order to perform the intended task.

Product

PXI Single 4 Channel Fibre Optic Mux FC/PC

40-850-114

-

Pickering Interfaces Inc.

40-850-114 - Pickering Interfaces Inc.

The 40-850-114 4-channel multiplexer is part of Pickering's range of PXI Fiber Optic MEMS Switching modules. They are available in many high density formats with a choice of different connector styles to suit most applications: FC/APC (for optimal performance), FC/PC and SC/PC for general applications and LC and MU for high density applications. Fiber optic multiplexers create a signal path by redirecting the optical signal into a selected output fiber. This is achieved using Micro-Mechanical Mirrors driven by a highly precise mechanism and activated via an electrical control signal.

Product

LED Optical Meters

-

HIOKI E.E. Corp

HIOKI E.E. Corp

Measure the optical characteristics of white LEDs and LED lighting during production. Measure Luminous Intensity, Chromaticity, and Color Rendering Index

Product

Two-Way Optical Loss Test Set

KI23410OLF-INGAAS-APC

-

Kingfisher International

KI23410OLF-INGAAS-APC - Kingfisher International

A Two-Way Optical Loss Test set (OLTS) that's perfect for medium to ultra high fiber count loss, length and optical return loss testing applications on single mode fiber with an APC connector at triple 1310 / 1550 / 1625 nm. A pair of these compact instruments set new standards of productivity, accuracy and ease of use. The 650 nm VFL is on a separate port.

Product

Aerosol Optical Tweezers

-

Bristol Industrial & Research Associates Ltd

Bristol Industrial & Research Associates Ltd

Biral Manufacturers Aerosol Optical Tweezing instruments that offer the ability to study individual particles over indefinite periods. Developed in collaboration with the Bristol Aerosol Research Centre at the University of Bristol the instruments are used in research applications such as atmospheric chemistry, pharmaceutical drug development and basic aerosol research.

Product

Easycheck Fiber Endface Inspector

CA3002

-

UC Instruments, Corp.

CA3002 - UC Instruments, Corp.

The integrated style design makes the size compact and operation easy. You are no longer to worry about so many cables between monitor and microscope, greatly saving the time for operation and worktable space, thus creating more productivity. Easycheck have a series different model according to different application, it has photo capture function; for transceiver checking; X、Y adjustable; image auto analysis and judgement, etc. The user can choose the desired model per the requirement.

Product

Autofocus Optical Fiber Microscope - AFM-700

-

Shanghai Fibretool Technology Co.,Ltd.

Shanghai Fibretool Technology Co.,Ltd.

The AFM-700 is an autofocusing optical fiber microscope.

Product

3D Automated Optical Inspection System

EAGLE 3D 8800 SERIES

-

Pemtron Co., Ltd

EAGLE 3D 8800 SERIES - Pemtron Co., Ltd

EAGELE 3D 8800 AOI applies 8-way projection for 3Dmeasurements to all models, minimizing shadow effectserrors and performing 100% 2D&3D examinations simultaneouslyin all FOV areas.