Integration
-
product
40Gb/s DPSK Receivers
Targeting for the next-generation 40Gb/s system based on advanced optical differential phase shift keying (DPSK) demodulation, Optoplex’s 40Gb/s Integrated DPSK Receiver (DPSK Rx) demodulates an incoming DPSK optical signal into a pair of differentially (amplitude) modulated RF outputs at data rate up to 43Gb/s in a compact package. Phase modulated optical signals offer much better dispersion performance compared with traditional amplitude modulated counterparts because the carrier light stays on all the time so that the intensity-dependent nonlinear effects in the transmission link are avoided, resulting in longer transmission distances.
-
product
Built-in MOSFET Integrated SiP
Renesas Electronics offers SiP products with integrated MOSFETs to enable easy configuration of high-performance multi-phase power supplies. They combine in a single package either controller, driver, and MOSFETs or driver and MOSFETs. These products make it easy to build a high-performance DC/DC converter while reducing stray capacitance and inductance, and achieving higher mounting density.
-
product
Constant Temperature Integrating Sphere
IS-*MT
According to requirement of IEC standards, the standard test temperature is 25℃, but high power lamps such as HID lamps and LED outdoor luminaires will produce a lot of heat during the test, thus the temperature inside the integrating sphere can not meet the requirements of IEC standards. Lisun Group designed the Constant Temperatured Integrating Sphere which allows the lamp was tested in a constant air temperature.
-
product
General Purpose Integrating Spheres
General Purpose Integrating Sphere Systems are designed to spatially integrate radiant flux in order to measure optical radiation. The spheres can be coupled with a sensor to create radiometers, photometers, or spectroradiometers in order to measure the total geometric flux emanating from a light source or the flux density of an illuminated area. Additionally, these sphere systems can be used to measure the output of high power lasers and laser diodes or to measure the reflectance and transmittance of materials.
-
product
Integrated Test Environment
ITE
The Integrated Test Environment (ITE) is our solution to handle complex hardware or software test projects.ITE provides features to define and manage requirements and test cases in different documents, link them with each other as well as plan tests and test campaigns. Moreover the tests can be developed, executed and evaluated by considering the linked requirements. Test results can additionally be recorded and finally reported in different, adaptable and configurable reports.
-
product
Uncooled Microbolometer
384 x 288 FPA
Drawing on its extensive experience in microbolometric detector design, fabrication, and characterization, as well as in detector-to-ROIC (Read-Out Integrated Circuit) monolithic integration, INO is proud to offer its 384 x 288 pixel microbolometer FPA (Focal Plane Array) in short series.
-
product
Integrated Performance Monitoring Software
SQlive
SQlive™ is compact, ready-to-install software for monitoring the performance of streaming video, IPTV and Voice over IP. Compact and highly resource efficient, SQlive can be embedded into mobile handsets, media players, set-top boxes, home gateways and other CPE and end system devices.
-
product
Information Technology Solutions
*Enterprise Infrastructure Management*Network/Systems Design & Administration*Client/Server Architecture*Classified & Unclassified Systems*System Integration, Engineering, & Analysis*Installation, Maintenance, Support & Upgrade*Network/Server Management & Load Balancing*Government & Commercial Solutions Integration*Operations Management & Maintenance*Strategic Planning*Portfolio Management*Organizational Development*Training & End User Support*Inventory & Asset Management
-
product
Communication Solutions
Bender provides a wide range of communication products to connect systems to facility technicians and management. A wide range of protocols are supported, ensuring interoperatibility with continually evolving technologies.Web browser interfaces and HMIs provide an easy-to-use gateway to your system. Integratable communication brings Bender into your industrial network. Cloud-based solutions provide a scalable, secure solution for system status and analytics across multiple facilities and locations.
-
product
Integrated Two-Stage Current Sensors
If ultra-low noise performance is required, our integrated two stage devices are the number one choice. With input inductances from 24 nH to 1.8 µH and a flux-noise level as low as 0.8 µPhi0/sqrt(Hz) an energy resolution of about 45 h is attained. The devices consist of a 16 SQUID series array as amplifier stage and a single front-end SQUID.
-
product
Signal Converters For High-accuracy Angular Measurement
EIB 1500 series
*Interpolation and digitizing electronics for the real-time digital processing of positions from two scanning heads*Input: incremental rotatory HEIDENHAIN encoder with two scanning heads and distance-coded reference marks (relative orientation of scanning heads: 180° ± 5°)*Output: EnDat 2.2, Fanuc Serial Interface, Mitsubishi high speed serial interface*Integrated subdivision: 16 384-fold
-
product
Integrated Event Recorder
Wabtec’s integrated family of event recorders feature an FRA Crash Hardened Memory with capacities of 8 to 128GB permit storage of Event Data from a variety of locomotive sources, storage of PTC mandated data channels, and storage of up to four HiDef video cameras. In addition to crash hardened memory, units can provide removable solid state disk storage of video from panel.
-
product
ITA, I2 Micro ICon, 168 Position
410130101
The i2 Micro iCon ITA is capable of holding up to 168 QuadraPaddle contacts. Its sleek, 0.8” footprint increases the horizontal stackability. The 30 degree U-shaped cable clamp allows ITA modules to be pre-wired before assembly and can hold cable bundles with an oblong bushing effective diameter of 0.77 in. The removable cover allows easy access to wiring for maintenance and probing. Integrated spring locking tabs ensure even and secure engagement.
-
product
Test Systems Integration
Highly flexible test solutions that are cost effective offering basic tests that easily adapts to high product volumes and complicated tests. Mobile computer based test stations provide a wide variety of test solutions at efficient costs.
-
product
Integrated Vision System
GEVA 312T
The GEVA-312T is an integrated vision system complete with a 12” touch screen display, 1.6GHz dual core processor and two Gigabit Ethernet camera ports. The slim-line form factor maximizes control panel real estate for PLCs, motions controllers and non-vision related components. The GEVA-312T is a good choice for customers who are looking for a complete system that is low-cost, expandable and applicable for a wide range of vision applications.
-
product
Tower Workstations
Highest Performance – Purpose Built – Performance Tuned – Integrated Workstations For Your Use Case
-
product
LED Tester0.3m-2m Integrating Sphere
CX-8000
Shenzhen Chuangxin Instruments Co., Ltd.
Measure Luminous Flux, Luminous efficacy, radiant power, Spectral Power Distribution, Chromaticity Coordinate, Correlated Color Temperature, Peak Wavelength, Dominant Wavelength, Spectral Half Width, Color Rendering Index, Colorimetric Purity, red ratio, Standard deviation of color matching(SDCM), voltage, current, power, power factor, harmonics, and etc. It meets the requirements of CIE standards.
-
product
GO-SCAN
15 10 HR
For the first time ever, Teledyne ICM and Teledyne DALSA, two of the most advanced x-ray solution providers in the world, unite forces and reveal the first Integrated Digital Portable X-Ray Solution for Non-Destructive Testing… ever!
-
product
High Speed Digital Camera
MEMRECAM Q1 Series
*The MEMRECAM Q1 Series cameras can operate as single stand alone cameras, or in a synchronized multi-camera system*Compact, rugged design – can withstand 150G shock for 10ms*Built-in Memory Backup is a standard feature (Up to 1 hour)*2/3-inch format supports standard C-mount and custom Hi-G lenses*62 (H) x 62 (W) x 65mm (D) , 400g.*Fully integratable with existing GX and HX Cameras*Supports simultaneous download of multiple MEMRECAM cameras*Power Input: 20-32 VDC*Power Consumption: 20W
-
product
Digitizer
730S Family
The 730S family is a digitizer capable of recording waveforms along with performing advanced algorithms for online digital pulse processing (DPP). Utilizing DPP Firmware, users can acquire quantitative physical parameters (Integrated Charge, Pulse Shape Discrimination with very fine time resolution, Pulse Height Analysis) as well as read out waveforms with automatic pulse identification and baseline suppression on channel basis (Zero-Length Encoding and Dynamic Acquisition Window). The wide range of DPP algorithms supported by the 730S family make it a “must-have” for any type of nuclear physics application.
-
product
Kelvin Test Contactor
cCompact
cCompact™ test contactor offers a reduced site-to-site pitch concept enables high parallel test for power applications on strip test and pick and place handler platforms.Featuring compact Kelvin footprint with outstanding CRES stability by Denmark pin material. Automotive temperature range -60°C to +175°C. Integrated Socket Air-distribution.
-
product
Integrated Automation Systems
When high-performance motion is at the core of your process, our expertise will get your custom automation system up and running faster and more reliably than the competition.
-
product
High-Precision Battery Tester with Integrated Chamber
Arbin's High-Precision Battery Tester (HPS) offers a turn-key solution with state-of-the-art technology, ensuring unmatched accuracy and precision.
-
product
Low-Noise Parametric Amplifiers
Insight Product Company offers Low-Noise Parametric Amplfiers based on Monolithic Integrated Circuits (MIC) in the frequency range of 30 to 100 GHz.
-
product
Vantage Pro2™ Plus Stations
6162 & 6162C
*Solar Powered Integrated Sensor SuiteThe wireless, rugged outdoor sensor suite runs on solar power. A lithium battery provides backup at night and during cloudy, winter days. The cabled version receives power from the base station.*TemperatureCurrent inside and outside temperature, and for each of the last 24 hours. High and low temperature alarms.*HumidityCurrent inside and outside humidity, and for each of the last 24 hours. High and low humidity alarms.
-
product
PCB High Sensitivity, 100mV/g, ICP® (IEPE) Accelerometer
780989-01
The PCB HSTC33 helps you acquire sound and movement data with supported PXI Sound and Vibration Modules, C Series Sound and Vibration Input Modules, and USB-based Sound and Vibration Devices. This sensor uses the Integrated Electronics Piezo-Electric (IEPE) current excitation. The PCB HSTC33 features a sensitivity range of 100 mV/g and requires a low-noise coaxial cable.
-
product
COM Express Type 6 Basic Module With Intel® Xeon® E3/7th Gen Intel® Core™ I7/i5/i3 Processors And Intel® CM238/QM175/HM175
CEM510
The CEM510 is based on the Intel® Xeon® E3 and 7th generation Intel® Core™ i7/i5/i3 processors with Intel® CM238/QM175/HM175 chipset. The 125 x 95 mm system-on-module was designed for graphics-intensive applications over the Industrial IoT, including industrial control, medical imaging, digital signage, and gaming machines. The embedded module is equipped with dual 260-pin DDR4-2133 SO-DIMM slots with up to 32GB system memory. Its wide operating temperature range of -40°C to +85°C strengthens the adaptability of various harsh conditions. For evaluation and development purposes, Axiomtek also has the CEB94011, a carrier board designed to operate with the CEM510 for additional I/O and expansions interfaces. Integrated with Intel® Gen 9 graphics, and with the support of DX12.0, OCL 2.0 and OGL 4.3, the module presents excellent graphics performance with resolution up to 4K (3840 x 2160 @ 30 Hz). Three independent displays are supported through LVDS and three DDI ports supporting HDMI, DisplayPort, and DVI (one DDI supporting optional VGA).
-
product
Sparklike Laser Integrated
Sparklike Laser Integrated™ is an automated insulating gas measurement station, which is integrated in the IG production line. In addition to measuring the gas concentration of IGUs, it helps with monitoring possible over fill and optimizes the use of butyl.
-
product
Integrated Chlorophyll Fluorometer
iFL
The iFL is the first instrument of its kind to provide leaf absorptance measurement, first to offer white LED lighting that allows chloroplast migration to occur, first to offer humidity control above ambient, first to offer "walk-away automation", first to offer automated post-processing for the Laisk protocol, the Kok protocol, the Yin protocol and the Flexas chamber leakage protocol.
-
product
Switches-SP5T
Macom Technology Solutions Holdings Inc.
At MACOM we offer an extensive collection of switches covering multiple commercial and aerospace and defense markets. Our product portfolio has a broad frequency spectrum from DC to 70 GHz. Our silicon Heterolithic Microwave Integrated Circuit (HMIC) PIN diode process is ideal for high power and broadband switches operating from 50 MHz to 26 GHz. Our AlGaAs PIN diode process can extend the upper frequency range of our switch die beyond 70 GHz and is ideal for instrumentation and radar applications. Our GaAs pHEMT and MESFET technology is ideal for fast switching and low control voltage switches optimized for both narrow band and broadband applications. Our 75 Ohm absorptive switches are designed specifically for demanding CATV, FTTx and DBS Infrastructure and CPE applications.
