Product

Faraday Cages

-

LBA Group, Inc

LBA Group, Inc

LBA's EMFaraCage® faraday cages are EMI and RFI shielding boxes and RF test enclosures that bring convenience to device testing. Faraday cages are ideal for isolating critical systems in high field RF environments or wherever RF ingress or egress must be minimized. Security, production testing, biomedical research and semiconductor testing are only a few of the many areas where EMFaraCage® faraday shielded enclosures are employed. EMFaraCage® faraday cage enclosure systems are fully featured to support a wide variety of test missions. The standard faraday cages include effective power, dataline and RF signal isolation in large test volumes. EMFaraCage® faraday cages are much more affordable than shielded room solutions and offer the convenience of portability.

Product

Fiber Optic Connectors & Cages

-

Pulse Electronics

Pulse Electronics

Pulse Electronics Networking BU supplies high-quality fiber optic connectors and cages to innovative ODMs, OEMs and other manufacturers designing today’s most demanding network products. Our line of 40+ fiber optic connectors include SFP, SFP+, and QSFP connector and cage products.

Product

Mu-Copper Faraday Cages

-

Holland Shielding Systems B.V.

Holland Shielding Systems B.V.

Mu-copper foil is used to create a Faraday cage in an existing room or building.

Product

Extender Boards

-

VECTOR Electronics and Technology, Inc.

VECTOR Electronics and Technology, Inc.

Extender boards are designed to bring a circuit card completely out of a card cage or enclosure so that it can be tested or debugged. This provides access to both sides of the test board.

Product

PCI Termination Products

-

Acromag, Inc.

Acromag, Inc.

Acromag provides a broad selection of hardware accessories to simplify the use of our I/O boards. This collection of panels, cables, and adapters facilitate field wiring and cable connections between boards within the card cage. Select from an assortment of cables and termination panels to simplify wiring and installation.

Product

Type 12R2, 19" Rackmount, MIL-Rugged, Family

12R2

-

ELMA Electronic, Inc.

12R2 - ELMA Electronic, Inc.

The 12R2 is designed to meet the harsh environment of shipboard, airborne, and ground mobile applications per MIL-STDs. Shock isolated versions are designed to attenuate 25G shock inputs to the chassis to less than 10Gs at the card cage.

Product

Type 12R2, 10U, 19" Rackmount, MIL-Rugged, Vertical

12R2-10U-V

-

ELMA Electronic, Inc.

12R2-10U-V - ELMA Electronic, Inc.

The 10U, 12R2 is designed to meet the harsh environment of shipboard, airborne, and ground mobile applications per MIL-STDs. Shock isolated versions are designed to attenuate 25G shock inputs to the chassis to less than 10Gs at the card cage.

Product

MMIHFWG-B

100245

-

ATX Hardware GmbH

100245 - ATX Hardware GmbH

With the MMIHF exchangeable unit, we offer an economical exchange system that makes it possible to keep the shielding cage and the mechanics as the basic unit when changing assemblies and thus to exchange only one cost-effective and, above all, space-saving cassette.

Product

Low Voltage DC / Battery Powered High Voltage Amplifiers

WMA-005 And WMA-005LF

-

Falco Systems

WMA-005 And WMA-005LF - Falco Systems

The Falco Systems WMA-005 is a high voltage amplifier that runs from an 24 - 30V DC power supply and can be battery powered if required, e.g. for use in a Faraday cage. Its internal high voltage generator is inductor-free and hence does not spread magnetic interference in sensitive experimental setups. The output noise is impressively low at 3mVrms. For extremely low noise applications where bandwidth is not an issue, a dedicated WMA-005LF version is available that contains an output low pass filter capacitor which reduces the bandwidth to 50Hz, but makes the noise drop to below 0.1mVrms. This bandwidth-limited amplifier is ideal for MEMS or piezo positioning with manual voltage adjustment.

Product

Antenna, Biconical

EM-6912A | 30 Mhz – 300 MHz

-

Electro-Metrics Corp.

EM-6912A | 30 Mhz – 300 MHz - Electro-Metrics Corp.

A balun, feedline, and element cage give the Electro-Metrics EM-6912A response curves that are almost linear, making it ideal for swept measurements. An added benefit is that the EM-6912A has an improved BALUN design, which makes it insensitive to changes of orientation while vertically polarized. Readings obtained will be the same no matter which element is closest to the ground plane, eliminating a potential source of measurement error.

Product

Picoamp Booster and Faraday Cage

CHI200(B)

-

CH Instruments, Inc.

CHI200(B) - CH Instruments, Inc.

With the CHI200(B) Picoamp Booster and Faraday Cage, current down to a few picoamperes can be readily measured. The CHI200 is compatible with the Model 600/A, 700/A series of instruments, while the CHI200B is compatible with Model 600B/C and 700B/C series. When used with 700/A/B/C series bipotentiostat, the Picoamp Booster will affect the primary channel only.

Product

Type 39 CompacFrame Development Platform, 1 - 4 Slot 3U VPX Power And Ground Backplane

39P01BWX6ZY2VCC0-Tx

-

ELMA Electronic, Inc.

39P01BWX6ZY2VCC0-Tx - ELMA Electronic, Inc.

Elma’s slimline CompacFrame is the next-generation platform designed to accelerate development and test of Plug-In Cards (PICs). The 3U card cage in the platform is tilted upward by 5º for easier card access and accommodates backplanes up to 4 slots.

Product

Highly Dynamic XY Linear Motor Scanning Stage

L-731

-

Physik Instrumente GmbH & Co. KG

L-731 - Physik Instrumente GmbH & Co. KG

The magnetic linear direct drive is designed to provide high velocity and acceleration for inspection and microscopy. With a travel range of 205 mm square and solid velocity to 100 mm/sec, the L-731 is equipped to deliver high accuracy and smooth motion. Precision crossed roller bearings with anti-creep cage assist enable superior guiding accuracy (1.5 m straightness for loads up to 20 kg). An integrated optical reference encoder and limit switch provide further positioning control and accuracy for this compact stage with 5 nm resolution. DC servo motor versions are available on request.

Product

MMIHFWG-C, Exchangeable Unit

100263

-

ATX Hardware GmbH

100263 - ATX Hardware GmbH

With the MMIHF exchangeable unit, we offer an economical exchange system that makes it possible to keep the shielding cage and the mechanics as the basic unit when changing assemblies and thus to exchange only one cost-effective and, above all, space-saving cassette.

Product

L-Frame, CompactPCI Serial, 5 Slots, SSR, 6U, 32HP, 299mm

632V0-E05R-50FA1-000

-

ELMA Electronic, Inc.

632V0-E05R-50FA1-000 - ELMA Electronic, Inc.

CompactPCI Serial System Type L-Frame with 5 Slots: 4x CompactPCI-S.0 Peripheral Slots and 1x CompactPCI-S.0. 1x 550W ATX, air-cooled with fan fix-mounted.Vertical backplanes and have a 160mm card cage in the front and a 80mm rear I/O.

Product

Die-cast Rotor Tester

AIP868X series

-

Qingdao AIP Intelligent Instruments Co., Ltd

AIP868X series - Qingdao AIP Intelligent Instruments Co., Ltd

Introducing the international testing technology and developing special sensor according to digital signal processing method, the die-cast rotor tester able to automatically analyze and judge the filling quality of die-cast rotor.This system is applied to all kinds of cast aluminum and copper rotors, such as: cast aluminum rotor of compressor motor, cast aluminum rotor of washing machine motor, cast aluminum rotor of fan motor, cast aluminum rotor of pump motor, rotor of automobile motor and three-phase asynchronous motor, etc. The main detection functions are: broken bar, fullness of the bar (thin bar, hole, bubble and porosity ), leakage between the squirrel cage and lamination, squirrel cage eccentricity, slot deviation.Test items: broken bar, thin bar, maximum amplitude value, minimum amplitude value, comprehensive value.

Product

Rack Mount Hawk/PC Chassis

9381

-

Strobe Data Inc.

9381 - Strobe Data Inc.

A slide-in replacement for a Nova/Eclipse. A 10.5 inch (267 mm) high chassis with a 5-position Nova/Eclipse backplane and card cage, 450 watt power supply, cooling and rack slides. Accommodates up to five DG-compatible 15" x 15" (381 x 381mm) boards, a PC motherboard, diskette drive and up to three visible half-height disk drive bays and one internal half-height drive bay.

Product

Antenna Rotator

PRO.SIS.TEL

-

Array Solutions

PRO.SIS.TEL - Array Solutions

This manual cover installation on a mounting plate inside a tower or a rotator cage with a thrust bearing. The rotator consists of a rotator and a control box unit.

Product

Analog Output Industry Pack Module, 12-bit D/A

IP220A

-

Acromag, Inc.

IP220A - Acromag, Inc.

The IP220A outputs analog voltage signals to drive up to 16 devices. When used with a carrier that holds four IP modules, up to 64 voltage outputs can be obtained from a single card cage slot.

Product

Electrical Motor Control

-

AOIP

AOIP

For more than 60 years, AOIP is specialized in the starting and control of asynchronous cage or slipring motors over any kind of equipment and in any weather conditions.

Product

Freestanding Modular Faraday Cage

-

Holland Shielding Systems B.V.

Holland Shielding Systems B.V.

A freestanding (independent of the host building) prefabricated modular Faraday cage provides a superior screening of RF-signals and is applicable in a wide range of situations for a wide range of purposes as described below.