-
Product
PCI Daughter Boards
DB-16R
-
The DB-16R is a 16 channel Relay Output Board. It consists of 16 form c relays for efficient switching of load by programmed control. It is connector and functionally compatible with our 785 series boards with industrial type terminal blocks. The DB-16R can be used by our A-82x board or any other compatible board. The relays are energized by applying a 5 volt signal to the appropriate relay channel on the 20-pin flat cable connector. Sixteen enunciator LEDs, one for each relay, light up when their associated relay is activated . This board provides a screw terminial for power to avoid overloading your PC's power supply.
-
Product
15.6" 16:9 P-CAP Touchscreen Monitor
USC-M15W
-
15.6" TFT LCD with LED backlight, 16:9 aspect ratio with 1920 x 1080 resolution, Default with P-CAP touch (non-touch option available). IP65-rated front panel, HDMI/USB-C connections, VESA 75 x 75 mounting available.
-
Product
Switch Probes (Normally Open (NO)) F87516B100G200
1001725
-
The Switch Probes (Normally open (NO)) F87516B100G200, with Order code 1001725, is a highly versatile basic contact probe designed specifically for demanding electrical applications. This product is suitable for environments with temperatures ranging from -45°C to +100°C and features a robust contact resistance of only 65 mOhm, ensuring reliable performance across various operating conditions. The probe has a switch travel of 1.50 mm and can handle a continuous current of up to 5 A, making it ideal for applications requiring precision and dependability.
-
Product
Temperature Forcing System
ETF-SERIES
-
Precise Temperature Accuracies with Reliable Test Results Temperature Limits: -40/-60 °C to 30 °C Temperature Accuracies: ±2-3°C Temperature Rate of Change: 20-25 deg /min (Non-linear) Maintenance Free Access to The System Self-Sufficient System Compact with small footprints suitable for any space constraint laboratories Low decibel system Suitable for testing electronic chips / devices Environmentally friendly refrigerants Efficient heating Microprocessor based single set point PID temperature controller with data logging Flexible hose up to 2.5-3.0m Interchangeable heads according to chip size. Inbuilt electrical control panel with switchgear system
-
Product
Step Probes (F732SP) F73211B1020G300SP
1006636
-
Introducing the Step Probes (F732SP) F73211B1020G300SP, a precision engineering solution designed for a wide range of applications in the electronics industry. These probes feature a carefully crafted design with a pitch of 2.54 mm, and can operate effectively in temperatures ranging from -45°C to +100°C. Boasting design specifications that assure reliability, the F732SP series stands out for its exceptional performance and build quality, making it a preferred choice among engineers looking for durability and precision.
-
Product
ARINC 429 PMC Interface Module
PMC-429
-
Avionics Interface Technologies
4, 8, 16, or 32 Software Programmable Tx/Rx ChannelsProgrammable High/Low Speed Operation - Concurrent operation of all Tx/Rx Channels at high data rates - Conduction-cooling and/or conformal coating available - Designed for extended temperature operations - Rate-oriented Label Transmission - Label Selective Trigger for Capture/Filtering - IRIG-B Time Code Encoder/Decoder for Data Correlation - ANSI Application Interface supporting C++, C#, and .net DevelopmentDevice Driver Support: Windows, Linux, VxWorks, and other operating system - Compatible with AIT’s Flight Simulyzer GUI Bus Analyzer Software
-
Product
High-Performance Basic Contact Probe F10062S090L200
1170235
-
The F10062S090L200 is a high-performance Basic Contact Probe designed for reliable and precise electrical measurement applications. With a pitch of 2.54 mm and a wide operating temperature range from -45°C to +80°C, it provides versatility for various environments. This probe is engineered to handle continuous currents up to 5.00 A, ensuring robust performance in both industrial and laboratory settings. Its exceptional pointing accuracy of ±0.08 mm makes it an ideal choice for detailed measurements, while the typical contact resistance of only 20 mOhm ensures minimal signal loss during operation.Constructed with high-quality materials, the F10062S090L200 features a steel plunger with longtime gold plating for enhanced durability and reliability. The barrel is made of bronze and also plated in gold, which provides excellent conductivity and corrosion resistance. The mechanical specifications reveal a preload of 80 cN and a spring force of 200 cN, ensuring the probe maintains its structural integrity and performance over time. Additionally, its compact dimensions, with a total length of 33.30 mm and a tip style diameter of 0.90 mm, make it suitable for tight spaces without compromising functionality.
-
Product
cDAQ-9181, 1‑Slot, Ethernet CompactDAQ Chassis
782052-01
Chassis
1‑Slot, Ethernet CompactDAQ Chassis - The cDAQ‑9181 is a CompactDAQ Ethernet chassis designed for small, distributed sensor measurement systems. The chassis controls the timing, synchronization, and data transfer between C Series I/O modules and an external host. You can use this chassis with a combination of C Series I/O modules to create a mix of analog I/O, digital I/O, and counter/timer measurements. The chassis also has four 32‑bit general‑purpose counters/timers. You can access these counters through an installed, hardware‑timed digital C Series module for applications that involve quadrature encoders, PWM, event counting, pulse train generation, and period or frequency measurement.
-
Product
Step Probes (F732SP) F73211B1005G150SP
1006400
-
The Step Probes (F732SP) model, specifically the F73211B1005G150SP variant with order code 1006400, embodies exceptional precision and reliability in electronic testing applications. This probe design highlights a meticulous attention to detail, with a pitch of 2.54 mm and a temperature range that withstands challenging conditions from -45°C to +100°C. Crafted from high-quality materials, including a plunger made of beryllium copper with gold plating, these probes ensure optimal conductivity and durability, making them an invaluable addition to any technical toolkit.
-
Product
Calibration Solutions
-
Calibration buffer solutions and deionized water are pre-mixed and color-coded to prevent errors. Ideal for calibrating electrodes and pH meters and are accurate to within ±0.01 pH at 25°C (77°F).
-
Product
NI-9157, 14-Slot, Virtex-5 LX85 FPGA, MXI-Express CompactRIO Chassis
781316-01
Chassis
14-Slot, Virtex-5 LX85 FPGA, MXI-Express CompactRIO Chassis - The NI‑9157 is a rugged MXI‑Express chassis for high-performance, high‑channel‑count applications. With the NI‑9157, you can add C Series I/O modules to your PXI system or industrial PC. You can daisy chain up to six NI‑9157 chassis in a single chain and connect up to eight chains to a single controller.
-
Product
Emulates Atmel T89C51RD2 in 68-PLCC package
FE-51RD2\68P
-
* Emulates Atmel T89C51RD2 in 68-PLCC package * 60K Code Memory * Real-Time Emulation * Frequency up to 20MHz/3V, 33MHz/5V * ISP and X2 Mode Support * MS-Windows Debugger For C And Assembler * Emulation Headers and Signal Testpoints * Target Board and Programmer Included * Serially Linked to IBM PC at 115Kbaud
-
Product
DC/DC With UPS And Charge Controller
PCM-PS402-512
DC Converter
WINSYSTEMS’ PCM-PS402-512 is a wide input range, triple output PC104 DC/DC converter with a built-in battery charger and uninterruptable power supply (UPS) controller. Designed for harsh environments, the power supply operates from -40° to +85°C without a fan or heatsink making it ideal for industrial applications.
-
Product
RTD Isolating Transmitter
Model TWR / TWR 2
-
Kusam Electrical Industries Limited
• Aux. Power AC 85 ~ 265V or DC 85 ~ 300V• High Accuracy 0.1% RO at 23 °C ± 5 °C• Input / Output User Selectable• PC Plastic Case, DIN Rail or Wall Mounting• High Dielectric Strength (AC 1.5KV/Min, between Input / Output / Power)
-
Product
Step Probes (F731SP) F73111B0036G100SP
1034328
-
The Step Probes (F731SP) F73111B0036G100SP is designed for precision applications requiring reliable performance in harsh environments. With a pitch of 2.40 mm and an operating temperature range from -45°C to +100°C, these probes are well suited for varied industrial uses where high accuracy is paramount. The critical specifications include a continuous current rating of 5A and a typical contact resistance of just 20 mOhm, ensuring effective electrical connectivity and minimal energy loss during operation.
-
Product
Transverse and Diametral Extensometers
-
3 models cover most any test requirement and can be used with axial extensometers at the same time. Miniature and standard units, also r-value units. Available options cover temperatures from -265 to +200 C (-450 to +400 F).
-
Product
Fine Pitch Probe FP380D2903P022U024L057
1127686
-
The FP380D2903P022U024L057 fine pitch probe is designed for precision applications, accommodating pitches between 300µm to 500µm with exceptional reliability. This probe, falling under the FP-D family, is engineered to endure harsh environments, featuring an operational temperature range of -45°C to +150°C. Its double plunger design ensures consistent contact, making it suitable for high-frequency applications up to 16.7GHz while maintaining a low contact resistance of just 120mOhm.
-
Product
Basic Contact Probes (50 Mil) F10005B150G060
1148919
-
The Basic Contact Probes (50 mil) F10005B150G060 are specially designed for precision applications requiring reliable connectivity. With a temperature range of -45°C to +80°C, these probes have been engineered to withstand extreme environmental conditions while ensuring optimal performance. The Basic Contact Probe features a nominal travel of 4.30 mm, making it ideal for various mechanical needs, while its preload of 30 cN and spring force of 60 cN provide adequate resistance for effective operation.
-
Product
Cable Assembly, 50-Pin D-Type, Male to Male, 2m HV, Exit Towards Pin 1
A050DM5-050DM5-HA200
Cable Assembly
50-Pin D-Type HV Cable assemblies are constructed from 7/0.2 (24 AWG) Tinned Copper Wire with PTFE Type C insulation. The connector assemblies can be secured to the mating part by a screwlock. The 50-Pin Female connector options of this product can be directly mated to a corresponding Pickering Interfaces switching product.
-
Product
Basic Contact Probes (100 Mil) F58815B150G180
1005813
-
The Basic Contact Probes (100 mil) F58815B150G180 is designed for precision and durability, making it an excellent choice for a wide range of applications in electronic testing. With a pitch of 2.54 mm, these probes maintain a temperature tolerance of -45°C to +80°C, making them suitable for various environmental conditions. The engineering behind the Basic Contact Probe ensures that it can handle continuous current up to 5.00 A while providing a typical contact resistance of just 30.00 mOhm, ensuring minimal energy loss in applications.
-
Product
Basic Contact Probe F05037S028P200HP
1137239
-
The F05037S028P200HP is a high-performance basic contact probe designed for a wide range of applications where precision and reliability are essential. With a total length of 43.2 mm, it operates efficiently across an impressive temperature range of -45°C to +100°C. The precision engineering of this probe ensures that it delivers consistent results even under challenging conditions, making it an invaluable tool for professionals seeking dependable measurement solutions.
-
Product
Switch Probes F88617K300U900SM
1004211
-
The F88617K300U900SM Switch Probes, engineered as part of the F886-NO family, are designed with superior performance and reliability. Suitable for a variety of applications, these probes operate in temperatures ranging from -45°C to +100°C, ensuring versatility across diverse operating conditions. Featuring a basic contact probe design, they maintain a continuous current capability of 10 A and exhibit a typical contact resistance of merely 50 mOhm, enhancing their efficiency and effectiveness in electrical circuits. Their dimensions, including a total length of 44.80 mm and a precision tip style diameter of 3 mm, make them an excellent choice for intricate and detailed tasks, such as in fine electronics or precision measurement environments.
-
Product
Basic Contact Probe F73317B230G150
1005629
-
The F73317B230G150 Basic Contact Probe is engineered for precision and reliability, making it an essential tool in various electrical applications. With a temperature range of -45°C to 100°C and a continuous current capacity of up to 10A, this probe is designed to maintain performance under challenging conditions. The carefully crafted design features a compact form factor with a total length of 28.30 mm and an accuracy of ±0.10 mm, ensuring that users can achieve the precise measurements necessary for their specific tasks.
-
Product
Basic Contact Probe F56315B300G330
1169822
-
The Basic Contact Probe, model F56315B300G330, is engineered for reliability across a range of applications. With a broad temperature tolerance of -45°C to +80°C, this probe is ideal for environments where extreme temperatures may occur. The probe features a precise nominal travel of 4.30 mm and a maximum travel of 6.40 mm, ensuring it excels in measuring contact performance with commendable accuracy. Its robust design includes a continuous current rating of 6.00 A and a typical contact resistance of just 100 mOhm, making it suitable for high-performance applications.
-
Product
Power Factor Transducer
*(0.2%ACC.) : TDPF. *(0.5%ACC.) : TSPF
-
Kusam Electrical Industries Limited
• Dual Aux. Power 110/220V AC• High Accuracy 0.2% RO at 23 °C± 5 °C• High Dielectric Strength 2.6KV AC / Min, Between Input / Output/ Power Case• ABS Plastic Case, DIN Rail or Wall Mounting
-
Product
Step Probe (F175SP) F17511B0013G100SP
1028054
-
The Step Probe (F175SP) F17511B0013G100SP is engineered for precision and reliability, with a design characterized by its optimal pitch of 1.90 mm (75 mil) and a temperature range of -45°C to +100°C. This probe is particularly well-suited for various measuring applications requiring high accuracy and durability. The F175SP is designed with a high spring force of 100 cN, ensuring that the probe maintains contact with the surface being measured, while its preload of 50 cN guarantees consistent performance under a range of operating conditions. Coupled with a nominal travel of 4.30 mm, this probe is built to deliver precise readings without compromising on quality or efficiency.
-
Product
Basic Contact Probe FL10030S060L300E21M
1142226
-
The FL10030S060L300E21M is a highly sophisticated basic contact probe designed specifically for use with Seica test systems. This model stands out due to its advanced engineering that delivers precision in electronic testing. Operating within a temperature range of -45°C to +100°C, it is equipped to handle a variety of testing environments, ensuring accurate results in diverse conditions. The probe promises a continuous current capacity of 5.00 A and offers a typical contact resistance of just 25 mOhm, making it a reliable tool for electronic applications.
-
Product
12.1" XGA Industrial Monitor With Resistive Touchscreen, Direct-VGA/DP And Wide Operating Temperature Range
FPM-7121T
Industrial Monitor
12.1" XGA TFT LED LCD with 50K backlight lifetimeRobust design with IP66 compliance aluminum front panelWide operating temperature range (-20 ~ 60 °C/-4 ~ 140 °F)Anti-glare screen with tempered glassSupports various mount options: panel, wall, desktop, and VESA armCombo RS-232+USB interface for touchscreen functionalityOSD control pad on rear coverLockable I/O connectors
-
Product
Switch Probes (Normally Open (NO)) F87506B180G350L
1006524
-
The Switch Probes (Normally Open (NO)) F87506B180G350L is designed for precision in a variety of applications, featuring robust construction and reliable specifications. With a pitch of 2.54mm, this basic contact probe is part of the F875-NO family, capable of operating in temperatures ranging from -45°C to +100°C. Its carefully engineered design ensures consistent performance, aided by a continuous current capacity of up to 5.00A and a typical contact resistance of 65.00mOhm, making it highly effective for electrical connections.
-
Product
Manual Step Attenuator, DC to 18 GHz, 0 to 110 dB, 10 dB steps
8496B
Attenuator
The Keysight 8496B dc to 18 GHz manual step attenuator offers exceptional repeatability and reliability. Attenuation is provided in 10 dB steps from 0 to 110 dB. Precision gold-plated leaf springs ensure long life (over 5 million cycles) and very high attenuator repeatability (typically 0.01 dB). To improve measurement accuracy, NIST traceable data (SWR and attenuation) is available as Option UK6. Custom step attenuator/switch combinations are possible. The Keysight 11716A/B/C interconnect kits provide quick connection of Keysight 8494/5/6/7 1 dB and 10 dB step attenuators in series for greater dynamic range with 1 dB steps.
