-
Product
Cable Assembly, 37-Pin D-Type, Male to Unterminated With Cut Ends, 1m, HV
A037DM5-C-HA100
Cable Assembly
The 37-Pin D-Type HV Cable assemblies are constructed from 7/0.2 (24AWG) Tinned Copper Wire with PTFE Type C insulation. The connector assembly can be secured to the mating part by a screwlock. The 37-Pin Female connector options of this product can be directly mated to a corresponding Pickering Interfaces switching product.
-
Product
0.1Hz-3.7GHz Frequency Counter
FC-3000
-
Features:*Frequency measuring range: 0.1Hz to 100MHz in A input, 80 MHz to 3.0GHz in C input.*Period,Total and RPM measurement for input A*9 Digit display with 0.01mHz resolution in 1 Sec (By Ext.Reference signal).*RS-232C serial interface function for communication with computer.*High sensitivity Extemal reference input function(>=1.5Vrms).*Peciprocal technique for high resolution at low counting frequencies .*Self check function executed to perform a automatic self diagnosis of various counter function.*Push-scanning for selecting Function and Gate time.*Low-pass filter(100KHz,-3dB)installed for removing noise signsl in low frequency measuring.*AC/DC coupling function(Selectable AC/CD Coupling)*10:1 Input Attenuation(Selectable×1/×10 Attenuator)*Data hold function
-
Product
Ethernet To Fiber Optic Converters (Point To Point)
-
Our rugged, industrial-grade, point-to-point Fast and Gigabit Ethernet to fiber optic converters work in pairs to extend 10/100/1000M Ethernet signals over long distance. These Fast and Gigabit Ethernet to fiber optic converters have been designed for harsh industrial environments and withstand a wide temperature of -40°F to 185°F (-40°C to 85°C), and they come with the options of multi-mode and single-mode, and ST, SC, FC, and SFP connectors.
-
Product
Needle Microprobe
MT-23/5HT
-
Fast-response 23 gauge needle probe, (needle length is 5 cm) for instant readings in tissue, semisolids, liquids. Also for very small specimens, powders and materials. Needle tip is sealed to ensure only stainless steel contacts specimen. Max. temp. 200°C. 5 ft. lead. Smallest microprobes give fastest reading. Short probes are easier to insert and last longer. Type #'s indicate needle gauge and needle length in cm.
-
Product
Pogo Connectors (≤ 3,50mm / 138mil) P19711B130G130TL106ST
1017591
-
The Pogo Connectors P19711B130G130TL106ST (Order Code: 1017591) is engineered to deliver robust performance and reliability across a wide range of applications. Designed as a basic contact probe, this model features a versatile pitch of 3.00 mm (118 mil), suitable for compact layouts while maintaining superior electrical connectivity. It can function effectively under extreme temperature conditions, rated from -45°C to +200°C, ensuring stability and durability in various environments.
-
Product
Formally Verified Optimizing C Compiler
CompCert
-
AbsInt Angewandte Informatik GmbH
Meet the highest levels of software assurance by compiling your application with the only C compiler that's been formally verified to be free of miscompilation issues. All safety properties verified on the source code, e.g. with Astre, are guaranteed to hold for the generated executable as well.
-
Product
High Force Type Probe For PCB, K100 Series 100mil Pitch, Type C, Ø1.50mm, 305gf
K100-C150305-SKAU
Spring Probe
K100 Series, Pitch 100mil, Tip Style C, Tip Diameter Ø1.50mm, Spring force 305gf, Steel with Gold Plating.
-
Product
21.5" Ubiquitous Touch Computer
UTC-520IT
Panel PC
21.5" Ubiquitous Touch Computer (IP66&69K) with Intel® Core™ i5-1145G7E. Low power and fanless system design. 21.5" monitor with 16:9 widescreen display. Built-in Intel® Core™ i5-1145G7E CPU. Wide operating temperature range (-10 ~ 50 °C).
-
Product
Basic Threaded Probes F17617B100G150
1128680
-
The Basic Threaded Probes, specifically the F17617B100G150 model, represent a significant advancement in precision engineering designed for robust applications. With a meticulous design aimed at enhancing contact reliability, this probe features a pitch of 1.90 mm (75 mil), enabling it to operate efficiently within a temperature range of -45°C to +100°C. The F176 family of probes delivers exceptional performance, making it suitable for a variety of testing and measurement applications in electrical engineering fields.
-
Product
Step Probes (F733SP) F73311B1016G150SP1
1008910
-
The Step Probes (F733SP) model, particularly the F73311B1016G150SP1, stands as a versatile tool engineered for precision applications. Designed with a pitch of 4.00 mm (157 mil), these probes operate optimally within a temperature range of -45°C to +100°C. They feature a robust design focused on ensuring durability and accuracy, making them ideal for various testing and measurement scenarios. The specifications showcase a continuous current rating of 10.00 A and a typical contact resistance of just 25.00 mOhm, highlighting their efficiency and reliability in electrical applications.
-
Product
Flash In Module
FIM Series
-
Axiomtek's FIM (Flash in Module) series is designed into ATA protocol type with compatible IDE standard interface based on flash memory technology. This flash module is offered with various capacities ranging from 128MB up to 4GB and can operate under industrial temperature range goes from -40°C~85°C in the harsh operating environments. The features of reliability, high performance, cost-effective and easy-to-integrate designs make FIM series a perfect solution over traditional storage devices.
-
Product
Temperature Measurement IR Sensors & Detectors
ST60 High Temperature
-
A single-channel silicon-based thermopile that will withstand operating temperatures of 225C, with a small active area of 0.61mm x 0.61mm in a TO-5 package. The reduced height package functions as an internal aperture. Two thermistor options provide ambient package temperature measurement. Currently only available with 8-14um silicon window. Time constant of 18ms with Nitrogen encapsulation gas delivers a very low Temperature Coefficient of Responsivity of -0.4%C. This detector has a very short thermal shock response to ambient temperature change.
-
Product
NI-9218, 51.2 kS/s/ch, 2-Channel C Series Universal Analog Input Module
783367-01
Analog Input Module
51.2 kS/s/ch, 2-Channel C Series Universal Analog Input Module - The NI‑9218 is designed for multipurpose measurements. It offers built-in support for accelerometer, powered sensor, full-bridge, and voltage measurements as well as quarter-bridge, half-bridge, 60 V, and current measurements using measurement-specific adapters. Each channel is individually selectable, so you can perform different measurements on each channel. The NI‑9218 is ideal for creating universal test systems for automotive, off-highway, and data-logging systems.
-
Product
3.5" Embedded SBC With Intel® Pentium® Processor N4200 & Celeron® Processor N3350, VGA/LVDS, Dual LANs And Audio
CAPA318
-
The CAPA318 features the Intel® Pentium® processor N4200 or Celeron® processor N3350 (codename: Apollo Lake) with low power consumption. The integrated 3.5-inch embedded board is highly expandable and customizable. It comes with RS-232 ports, USB 3.0 ports, USB 2.0 ports, IN/OUT digital I/O ports, VGA port, LVDS port, and Gigabit Ethernet ports with Intel® i211AT Ethernet controller. For storage needs, the CAPA318 provides one SATA-600 socket and one mSATA interface. Additionally, Its compact and fanless design makes it perfect for use in space constricting environments. Additionally, the 3.5” single board computer can handle a wide operating temperature range from -20°C to +70°C (-4°F to +158°F) and requires +12V DC power input to ensure operational stability in a variety of harsh environments. This cost-effective 3.5” embedded motherboard is suitable for IoT/M2M related applications, industrial control, self-service terminals, digital signage, POS/kiosk displays, just name a few.
-
Product
NI-9228, ±60 V, 1 kS/s/ch, 24-Bit, Simultaneous Input, 8-Channel C Series Voltage Input Module
783861-01
Voltage Input Module
±60 V, 1 kS/s/ch, 24-Bit, Simultaneous Input, 8-Channel C Series Voltage Input Module - The NI‑9228 performs differential analog input. With channel-to-channel isolation, your entire system, including the device under test, is protected from harmful voltage spikes up to the isolation rating. The NI‑9228 is simultaneous sampling with two options for filtering: a low-latency filter or a 50/60 Hz rejection filter. The low-latency filter enables users to use this module in industrial or control applications while getting better external noise rejection.
-
Product
Switch Probe F87516B060G135S1
1001011
-
The F87516B060G135S1 Switch Probe is engineered for precision and reliability, featuring a normally open (NO) contact configuration ideal for a variety of applications. With a robust design, it operates within a temperature range of -45°C to +100°C, ensuring functionality in challenging conditions. The probe boasts a total length of 50.60 mm, with a carefully crafted tip style diameter of 0.60 mm designed for optimal performance and accuracy. Its ability to maintain a continuous current of 5.00 A alongside a typical contact resistance of just 65 mOhm underscores its effectiveness in high-demand environments.
-
Product
Flexible Implantable Microprobe
IT-21
-
IT-121 Flexible Implantable Microprobe - Implantable in semi-solids and tissue with 21 gauge needle (supplied). Ideal for subcutaneous and cranial temperatures in small animals. Also for immersion in various solutions. Totally sheathed in chemical resistant Teflon™. Maximum Temperature 150°C . Isolated. Probe diameter .016" (21 gauge represents the needle gauge that the probe can be inserted through). Time constant 0.08 seconds.
-
Product
Isoperibol Calorimeter
AC500
-
The AC500 determines calorific value, a key indicator of quality and value in solid and liquid fuels, through measurement of the heat released after combustion of a sample. This stand-alone benchtop unit uses a fully-integrated circulation system for a compact footprint—no additional heaters or coolers required. An integral water-measuring station simplifies sample preparation, and a Windows®-based operating system uses an electronic thermometer accurate to 0.0001°C to measure temperature every six seconds. Two-channel correction is possible through constant temperature monitoring in both the outer jacket and the calorimeter proper.
-
Product
Push Back Probes (VF4) VF406B240G25
1002328
-
The Push Back Probes (VF4) VF406B240G25 is a high-quality basic contact probe designed for precision applications. With a pitch of 4.00 mm (157 mil), it operates efficiently in a temperature range of -45°C to +100°C, making it suitable for various environments. The probe supports a continuous current of up to 10.00 A, ensuring reliable electrical performance. Its typical contact resistance is impressively low at 30.00 mOhm, allowing for optimal signal transmission and minimizing energy loss.
-
Product
Basic Contact Probes (50 Mil) F11112S090L040
1001411
-
The Basic Contact Probes (50 mil) F11112S090L040, identified by the order code 1001411, are engineered for precision and reliability in electrical applications. These probes seamlessly blend functionality with a robust design, featuring a pitch of 1.27 mm and operating temperature range of -45°C to +80°C, making them suitable for a variety of environments. Notably, they offer a continuous current rating of 3.00 A and a typical contact resistance of only 65.00 mOhm, ensuring efficient electrical connections and minimal power loss during operation.
-
Product
Gauge Type T Thermocouple Wire
W-TW-40
-
Most thermocouple wire used in the manufacture of sensors is "Special Limits" wire which, to meet NIST standards, must be accurate to 0.5°C in the range 0-50°C. This means that even with most sophisticated electronics, the best possible accuracy for the system is 0.5°C.
-
Product
Basic Contact Probe P40011M280U150TL135ST
1000272
-
The P40011M280U150TL135ST Basic Contact Probe is a high-performance component specifically engineered for precision applications. Designed to operate effectively in a wide temperature range from -45°C to +200°C, this probe is perfect for various industrial purposes where reliable performance is paramount. With a compact total length of just 13.50 mm and a projection height of 2.50 mm, it fits seamlessly into tight spaces, ensuring excellent usability in constrained environments. The probe boasts a finely tuned contact resistance of only 100 mΩ, allowing for efficient electrical conductivity, which is essential in sensitive electronic applications.
-
Product
Specialized Component IB-R-SB-040-4A-WW-03-FL
1170327
-
The IB-R-SB-040-4A-WW-03-FL is a specialized component designed by Interface Solutions, ideal for ICT fixtures. This product excels in its ability to function effectively in extreme temperature ranges from -45°C to +100°C, making it suitable for various industrial and technical environments. The assembly is crafted with precision, integrating a reliable design aimed at providing optimal performance under demanding conditions.
-
Product
Step Probe F73216B1061G150SP
1010610
-
The F73216B1061G150SP Step Probe is a precision instrument designed for high performance in demanding environments. Its robust design allows operation across a temperature range of -45°C to +100°C, making it suitable for various applications. The probe features a unique pitch of 2.54 mm and is engineered with exceptional electrical specifications, including a continuous current rating of 5.00 A and a typical contact resistance of just 20 mOhm, ensuring reliable and efficient operation.
-
Product
Basic Contact Probes (100 Mil) F10014S150L300HP
1017757
-
The Basic Contact Probes (100 mil) F10014S150L300HP are designed for precision and reliability in a variety of applications. With a pitch of 2.54 mm (100 mil), these probes are engineered to operate efficiently across a wide temperature range of -45°C to +80°C. Made using high-quality materials, the probe's plunger is crafted from steel and features a Longtime Gold plating that ensures durability and excellent conductivity. The bronze barrel, also plated with gold, adds to the overall longevity and performance of the product. These features make the Basic Contact Probes suitable for demanding environments.
-
Product
Pico-ITX SBC With Intel® Celeron® Processor J1900/N2807, LVDS/VGA, LAN And Audio
PICO843
-
The PICO843 is an extreme-compact fanless pico-ITX motherboard with flexible cabling. The durable PICO843 is designed to support the Intel® Celeron® processors quad-core J1900 and dual-core N2807 (codename: Bay Trail) with one DDR3L 1066/1333 up to 8 GB memory. The pico-ITX motherboard is capable of operating under wide temperatures from -20°C to +70°C. Its fanless design and low power consumption also offers better reliability and power savings. The ultra-slim size easily meets compact size requirements for space limited or harsh applications. Its I/O functions all come from internal connectors enabling super slim, flexible wiring design. The Axiomtek PICO843 is ideal for in-vehicle PCs, medical imaging, gaming, in-flight entertainment systems, industrial automation systems, and the portable devices.
-
Product
F10015B150G150L
1017541
-
The F10015B150G150L Basic Contact Probe, identified by order code 1017541, is a state-of-the-art probe designed for superior performance in various applications. Constructed with a tip style of 15, this probe features a unique design with a pitch of 2.54 mm (100 mil), allowing for precise contact in intricate environments. With an impressive operational temperature range from -45°C to +80°C, this durable probe is well-suited for both extreme cold and heat applications. Additionally, its compact dimensions, including a total length of 35.40 mm and a projection height of 8.40 mm, make it versatile and easy to integrate into various setups.
-
Product
Basic Contact Probes (75 Mil) F70311B078G150
1017943
-
The Basic Contact Probes (75 mil) F70311B078G150 are engineered for precision and reliability, making them an ideal choice for various applications in the realm of electronic testing and prototyping. With a pitch of 1.90 mm (75 mil), these probes are designed to connect seamlessly to components, ensuring secure and efficient electrical connections. The probes operate efficiently within a temperature range of -45°C to +80°C, ensuring stability across diverse environments. The meticulous design offers exceptional performance with a continuous current rating of 4.00 A and a typical contact resistance of merely 20.00 mOhm, contributing to their effectiveness in maintaining high signal integrity.
-
Product
I-G1S4
1014545
-
The I-G1S4 Basic Contact Probe is designed for precise electrical connections in a variety of applications. With a robust build that includes a brass handle and gold plating, this probe ensures durability and excellent conductivity. Operating over a wide temperature range from -45°C to +250°C, it adapts well to challenging environmental conditions, making it suitable for diverse industries.
-
Product
Single Slot Intelligent Interface Card
IIB-3910-CPCI
-
The IIB-3910-CPCI is a single slot intelligent interface card providing complete STANAG 3838 and STANAG 3910 test, simulation and bus analysis capability for the CompactPCI Bus. The IIB-3910-CPCI supports concurrent Bus Controller (BC) and up to 31 Remote Terminals (RT) with Bus Monitor (BM). An additional stand-alone Chronological Bus Monitor (CBM) facility is also provided, with powerful multi-level triggering capability. Full error injection capability in both 3838 and 3910 modes is provided in BC and RTs modes, with full error detection in BC, RT, BM and CBM modes. Dual redundant 3838 interface, with user selectable dual redundant optical or single redundant electrical 3910 interface are featured. 2 Mbytes of dual ported RAM are provided. The board is supplied with C drivers in source code and Windows menu driven software as standard.
