Product

Phase Shifting Transformer

-

Supreme Instrument Laboratories

Supreme Instrument Laboratories

Supreme make PHASE SHIFTING TRANSFORMERS are special transformers which provide convenient means to adjust phase angle (power factor) of A.C. loading circuit while testing power factor sensitive device for the full 90 degree LAG through '0' degree to 90 degree LEAD. Based on their rating these Phase shifters are manufactured in two configuration.

Product

ATTR Auto Transformer Turns Ratio Tester

-

Chongqing Assen Power Equipment Co., Ltd

Chongqing Assen Power Equipment Co., Ltd

Transformer turns ratio tester is a new type of fully automatic tester that uses modern electronic technology to measure the ratio of single-phase and three-phase transformers, and does not require any manual “zero” balance.

Product

Series Precision Fixed-Ratio Current Transformers

PMT25100

-

Power Measurement Technologies Inc.

PMT25100 - Power Measurement Technologies Inc.

Precision two-stage toroidal current transformers find application as the reference in determining the accuracy of instrumentation current transformers.

Product

Standard CW Amplifiers

-

Tomco Technologies

Tomco Technologies

The BT-AlphaA-CW series is a range of classAB RF power amplifiers covering the 10kHz to1MHz frequency range. Rugged, solid-state design - high reliability. Extremely high phase and amplitude stability. High linearity. In-Built Protection. Very fast blanking. Capable of pulsed operation. Competitively priced. Suitable for CW radar, communications, HF/VHF jamming, particle accelerator applications/plasma systems, plasma, RF heating and other scientific applications.

Product

Benchtop Rubidium Frequency Standard

FS725

-

Stanford Research Systems, Inc.

FS725 - Stanford Research Systems, Inc.

The FS725 integrates a rubidium oscillator (SRS model PRS10), a low-noise AC power supply, and distribution amplifiers in a compact, half-width 2U chassis.

Product

Transformer Winding Resistance Meters

TWA Standard Series

-

Amperis sl

TWA Standard Series - Amperis sl

The TWA standard series instruments are designed to measure the resistance of six coils and simultaneously analyze the three-phase tap changer on load of the primary and secondary transformer coils (provided by model TWA40). This is done in a single cable configuration, with test currents up to 40A. Each transformer configuration has a special measurement algorithm that is optimized for rapid stabilization of test results. The TWA instruments generate a true DC current without ripple. Both current injection and magnetic circuit energy discharge are automatically regulated.

Product

Conformance Calibration Standard Test Card for GS1-128 Symbol Verifiers

AI-CCS-128-E Rev B

-

Applied Image, Inc.

AI-CCS-128-E Rev B - Applied Image, Inc.

This test card is ideal for testing of verifiers, scanners, and other GS1-128 barcode reading equipment. It also can serve as an excellent training aid to ensure new operators are using the proper methodology and are proven competent in the use of verifiers.

Product

Pyranometer First Class standard (ISO 9060 / WMO)

CMP 6

-

Kipp & Zonen B.V.

CMP 6 - Kipp & Zonen B.V.

The CMP 6 pyranometer is intended for routine global solar radiation measurement research on a plane/level surface.Fully compliant with ISO-9060 specification for a First Class pyranometer, the CMP 6 features a sixty-four thermocouple junction (series connected) sensing element. The sensing element is coated with a highly stable carbon based non organic coating, which delivers excellent spectral absorption and long term stability characteristics

Product

Current Transformers

-

Howard Butler Ltd.

Howard Butler Ltd.

A range of ring type current transformers suitable for primary currents from 1A-5000A with 1A or 5A secondaries. This standard range of measuring and protective current transformers is available as resin coated or tape wrapped.

Product

Standard Emission Monitoring System

CEMS-2000

-

Focused Photonics Inc.

CEMS-2000 - Focused Photonics Inc.

CEMS-2000 is a multi-gas monitoring system aimed to continuously and reliably measure emissions from various industrial combustions. The adoption of the hot-wet extractive method avoids the loss of content during sampling. The system is extendable with additional parameters upon request. All output signals proceed through the data acquisition system and then upload to the DCS or environmental authority server.

Product

Ethernet Transformers

-

Pulse Electronics

Pulse Electronics

Pulse’s Ethernet transformers are RoHS compliant and qualified at major PHY suppliers. 100/1000/2.5G/5G/10GBASE-T Ethernet transformer modules are optimized for all major LAN transceivers. All modules provide electrical circuit isolation that meets IEEE 802.3, while maintaining signal integrity needed for the most demanding applications.

Product

Standard Test Devices

-

Zhengzhou SMS Electric Co.,Ltd

Zhengzhou SMS Electric Co.,Ltd

Fast, accurate verification to ensure that all devices work reliably.

Product

Open Network Standards

ControlNet

-

HMS Networks

ControlNet - HMS Networks

ControlNet is one of three open network standards (DeviceNet, ControlNet and EtherNet/IP), all of which use a common application layer, the "Common Industrial Protocol" (CIP). The Family of CIP Networks is specified and published by ODVA (Open DeviceNet Vendor Association - http://www.odva.org) and CI (ControlNet International - http://www.controlnet.org).

Product

Standard Version CODE300-32

-

Hoka Electronic B.V.

Hoka Electronic B.V.

CODE300-32 Standard is a software solution to demodulate, decode and analyze digital signals transmitted via radio. Our software don't requires special hrdware part for processing the signal. The audio signal can come from traditional receivers and handled with a common soud card already included on all PC and Notebook, SDR receivers, signal recorded and stored in a standard audio file, it is also possible to use audio signals from the LAN, signals in I/Q format, and digital audio signals from virtual soundcard.

Product

Standard Transmitter

Tipix 3000

-

IRIS Instruments

Tipix 3000 - IRIS Instruments

The TIPIX 3000 is a transmitter purposely designed for deep Induced Polarisation or Resistivity sounding investigations. This transmitter is generally used together with V-Fullwavers or Elrec Pro receivers.

Product

Complete Transformer Test Bench

-

Weshine Electric Manufacturing Co., Ltd

Weshine Electric Manufacturing Co., Ltd

Our multifunction Transformer Test Bench (VS-ZHSY Series) is intuitive with all of the ease of working with individual, dedicated instruments. We deliver this experience through our design philosophy. Rather than producing a single, complex system with afterthought towards rendering it friendly, we uniquely combine several intelligent instruments packaged as a single system.

Product

High Frequency Transformers

-

Osborne Transformer Corp.

Osborne Transformer Corp.

Osborne High Frequency Current Transformers operate at frequencies higher than 50/60 Hertz. Their purpose is to reduce high frequency system currents to lower values that are appropriate for instrumentation and/or protection circuits. They have been designed to meet specified current ratios, and burden impedance at a specified transformation error. One area of unique Osborne expertise is in designing for phase shift when high frequency current transformers are to be used for power measuring applications.

Product

Instrument Transformer Testing

-

Weshine Electric Manufacturing Co., Ltd

Weshine Electric Manufacturing Co., Ltd

Your product description goes here.

Product

Software For Transformer Measuring Lite

T-Base Lite

-

Raytech AG

T-Base Lite - Raytech AG

T-Base Lite is intended for users preferring simplicity over complexity of the Pro version. It is limited to the basic functions of USB interface, data import, data export, synchronization, and automatic firmware updates. Data can be exported in many popular data formats such as Excel, Word, text, .csv, .xml, Crystal reports, and .html. Measurements can be saved as archive files and imported into the database of the T-Base Pro version.

Product

Three Phase High Precision Reference Standard Energy Meter

SY3102

-

Hong Kong Songyang Industrial Ltd.

SY3102 - Hong Kong Songyang Industrial Ltd.

There are three ports for pulses to output. And its constants can be set automatically or manually. Types of constants can be set also: active power, reactive power, apparent power, voltage, and current.

Product

Standards and Regulations

-

LHP Engineering Solutions

LHP Engineering Solutions

Is your organization ready to engage in the world of autonomous and electric vehicles?