Product

Smart MUTT Updated Trailer Tester

#9007A

-

Innovative Products of America

#9007A - Innovative Products of America

The Smart MUTT is a portable trailer tester for the mobile and commercial trailer repair technician. It places a load on the trailer's electrical circuits to identify wiring problems while providing remote control operation for the lights. The Smart MUTT is powered by an (optional) internal 12v battery and provides an easy method to accessing trailer ABS blink codes.

Product

1211a Optical Receiver/Distribution

-

Precise Time and Frequency, Inc.

Precise Time and Frequency, Inc.

To complement the range of high quality frequency and timing references, Precise Time and Frequency, LLC. has now introduced a new Optical Time Code Receiver, with Auto Switching, a full complement of time code outputs, and Ethernet/RS232 remote monitoring/control interface.In addition to the auto switching capability, the new ptf 1211A delivers up to thirty six channels of Time Code outputs, including re-transmission of the optical input. The unit can accept a pair of inputs (usually from separate primary and backup sources), and provides monitoring of both the inputs and outputs for signal integrity.If the primary input fails, the unit will automatically switch to the backup input and indicate a primary signal fault.Full remote monitoring and control via RS232 and Ethernet interfaces includes telnet, http (web browser), and SNMP protocols.

Product

Zero-footprint Timing Analysis For Critical Software

RapiTimeZero

-

Rapita Systems Ltd.

RapiTimeZero - Rapita Systems Ltd.

*Collect timing metrics from systems that produce branch traces* Identify code to optimize for worst-case behavior*Debug rare timing events*Simplify verification through integration with your CI tool*Analyze timing behavior of libraries without source code

Product

Structural Engineering And Design

AEC

-

Altair Engineering, Inc.

AEC - Altair Engineering, Inc.

Altair's architecture, engineering, and construction (AEC) solutions offer unparalleled productivity for building and non-building structures with their advanced versatility, integration, and data management capabilities. Our analysis and design solutions simulate responses to a range of dynamic, nonlinear loading conditions, including wind, snow, water, seismic, blast, dead, live, and moving loads – all while ensuring design resiliency and regional code compliance.

Product

ActiveX Controls for ADLINK DAQ/DAQe/PXI-2000 Series Cards (Vista Ready)

D2K-OCX

-

ADLINK Technology Inc.

D2K-OCX - ADLINK Technology Inc.

D2K-OCX ActiveX controls communicate with ADLINK data acquisition cards to perform digital, analog, and timer/counter operations. These ActiveX controls well-designed to hide all details of hardware manipulation so the data acquisition operations can be achieved by only few lines of codes. Furthermore, any hardware configuration can be done with the easy-to-use property pages, and the acquired data is returned in a event-driven manner.

Product

Test Solution

Eye-BERT MicroX

-

Spectronix

Eye-BERT MicroX - Spectronix

The Eye-BERT MicroX is a compact, easy to use test solution offering high performance bit error rate testing at a fraction of the cost of competing solutions.  The unit is offered in two speed grades including the X10 which operates up to 14.5Gbps, and the X30 which extends the data rate to 29Gbps.  Its broad data rate capabilities and long test patterns make this unit suitable for testing nearly all optical SFP, SFP+, and SFP28 transceivers in production with just one unit. The real-time eye opening monitor and eye scanning capability can aid in troubleshooting by providing the operator with additional link quality information.  Other features include Autonomous pattern detection, SFP diagnostic tools, and wavelength tuning (per transceiver capability).  With a click of a button the Eye-BERT MicroX will automatically test an SFP module based on its advertised capabilities and generate a detailed test report complete with manufacturer, part number, serial number, date code, fiber type, link length, speed, and test results.  The Unit is supplied with anti-skid bumpers and is small enough to be integrated into larger systems for dedicated link verification.

Product

Unit Testing

-

Hitex GmbH

Hitex GmbH

Hitex offers a unit testing service for C/C++ application source code using the well-known test tool TESSY.  For this service, the customer provides their source code of the C/C++ functions to be tested, ideally along with the specifications of the functionality and comprehensive comments in the source code.

Product

1D/2D Barcode Reader

UTC-510P-B

-

Advantech Co. Ltd.

UTC-510P-B - Advantech Co. Ltd.

1D/2D:752x480 CMOS2D Barcode Decoder Chip 72MHzRed LED 625±10 nm. 1D Linear:20% minimum reflective differenceTypical 3 mil (Code 39, PCS 0.9)Up to 24 inches on 100% UPC/EAN symbolsUp to 31.5 inches on 20 mil Code 39630nm visible red LED.

Product

M07 Rugged | THT Horizontal | Threaded

M07-1xxx-20/30xx

-

ELMA Electronic, Inc.

M07-1xxx-20/30xx - ELMA Electronic, Inc.

Rugged coded switd designed for harsh application environment with HEX, Gray or BCD coding, up to 4.5 Ncm switching torque and up to 16 positions

Product

Cable, 96-Pin 1.27mm Pitch Female To Unterminated, Tinned Ends, Screwlocks, 1m

A096SFR-T-6A100

-

Pickering Interfaces Inc.

A096SFR-T-6A100 - Pickering Interfaces Inc.

The 96-Pin 1.27mm Pitch to Unterminated Cable Assy is constructed from 28 AWG Twisted Pair Tinned Copper wire with Polyolefin insulation. Crosstalk is minimised. Wires are colour coded for easy connection. Metal Spring Latches are provided on the 96-Pin connector.

Product

Rotary Table Handler

6000 Series Rotary Handler

-

Circuit Check, Inc.

6000 Series Rotary Handler - Circuit Check, Inc.

Rotary table handlers are an excellent choice for PCBA or product – level test, programming, part marking, automatic part rejecting, and vision inspection in order to satisfy manufacturing applications that require high throughput. Rotary table based systems used in production can also help reduce the impact of load and unload times for the operator, because the device-under-test (DUT) automatically moves to the next cell within the station as each DUT is loaded. Circuit Check’s 6000 series handlers are modular, scalable and flexible, supporting high-mix and high-volume production needs. A common application example is to configure a 6000 series as a rotary station to perform simultaneous PCBA bar code scanning, testing, programming and marking, in a pipe-line process which improves throughput requirements. The 6000 series handlers leverage Circuit Check’s unique quick-change fixture drop-in technologies to allow for station modularity and scalability. Production line flexibility is achieved because the 6000 series handler is software and hardware agnostic, enabling adaptability to a variety of applications, and is limited only by the number of stations.

Product

68HC16 In-Circuit Debugger

ICD16Z

-

P&E Microcomputer Systems

ICD16Z - P&E Microcomputer Systems

P&E's ICD12Z for Windows is a powerful tool for debugging code. It uses the HC(S)12 processor's background debug mode (BDM), via one of P&E's hardware interfaces, to give the user access to all on-chip resources.

Product

RE Family Development Environment

-

Renesas Electronics Corp.

Renesas Electronics Corp.

Renesas offers integrated development environments, driver software, sample code, an evaluation kit, and flash programmers for accelerating your system development.

Product

Service Tools

-

Autel

Autel

This powerful, corded tablet can read and erase codes, view Freeze Frame and, view and graph Live Data, and perform bi-directional Active Tests and Special Functions.

Product

Programming Stations

-

Fitech Ltd.

Fitech Ltd.

A dedicated computer setup used to create, test, and upload code or instructions for machines (like CNC tools or industrial robots) or electronic devices (like ECUs) away from the main equipment, reducing downtime and improving efficiency; it mimics the main control interface, allowing for offline development, simulation, and diagnostics, ensuring smoother operations when the actual machine runs.

Product

Interface for Two Dual Redundant 1760 Channels

EXC-1553ExCard/Px-1760

-

Excalibur Systems, Inc.

EXC-1553ExCard/Px-1760 - Excalibur Systems, Inc.

This credit card sized interface supports up to two dual redundant 1760 channels and is compatible with all common variations of MIL-STD-1760 providing a wide range of features normally found only on full size testers.Multi FunctionEach channel of the EXC-1553ExCard/Px-1760 operates simultaneously as a Bus controller and/or multiple (up to 32) Remote Terminals, or as a Triggerable Bus Monitor. The card supports error injection and detection. The card’s small size and compatibility with notebook computers make it the perfect solution for performing system simulation of the MIL-STD-1760 bus, in the lab and in the field. Single Function Each channel of the EXC-1553ExCard/PxS-1760 operates either as a Bus Controller, Remote Terminal, or Bus Monitor.The EXC-1553ExCard/Px-1760 and EXC-1553ExCard/PxS-1760 cards are supplied with C drivers, including source code, Merlin+ Windows software and may be used with Exalt, Excalibur’s Analysis and Laboratory Tools, a Windows monitoring application.Note: Some laptops do not supply the average and peak power voltages required by the ExpressCard specification. The EXC-1553ExCard/Px-1760 may not function properly in these laptops.

Product

White Box Testing

-

Precise Testing Solution

Precise Testing Solution

Does your application have legacy code and your software code messy? If the answer to the above questions is ‘Yes’, your application will fail to perform as expected. Under such cases, you need to optimize the internal structure of your application so that it performs well. To test for the errors in the internal structure opt for white-box testing.

Product

RV Power Protection with Surge

EMS-PT50C

-

Progressive Industries

EMS-PT50C - Progressive Industries

Progressive Industries Portable Electrical Management Systems (EMS) offer quick and easy RV electrical protection. A true plug-and-play application with no installation required. You will feel secure with multi-mode surge, voltage, polarity, and lost/open neutral protection. Each unit includes a digital display, scrolling continuously through the power source information: voltage(s), current frequency, error code, and previous error code (if applicable). Additionally, the computer is driven by state of the art microprocessors.

Product

Trace Extensions

-

Lauterbach Inc.

Lauterbach Inc.

Trace based debugging adds a powerful set of features to complement and enhance your existing debug tools. Many modern devices include a trace port which is capable of providing real-time, non-intrusive information about program flow and data operations. This can be used to work out where code has been, how long things took, to analyze task switches, interrupts, and to generate code coverage reports. If you think of traditional debugging as a series of snapshots, then trace-based debugging is a video with timestamps.

Product

ARINC 429 Test & Simulation Interface for VME

VME-429

-

Avionics Interface Technologies

VME-429 - Avionics Interface Technologies

4, 8, 16, 32, or 64 Software Programmable Tx/Rx Channels - Programmable High/Low Speed Operation - Concurrent operation of all Tx/Rx Channels at high data rates - Full Error Injection & Detection - Rate-oriented Label Transmission - Label Selective Trigger for Capture/Filtering - IRIG-B Time Code Encoder/Decoder for Data Correlation - ANSI Application interface supporting C, C++, C#, and .net development - Device driver support: Windows, Linux, & VxWorks (others on request) - Designed for extended temperature operations - 64-bit VME - Interface (VME master & slave capability) - Front Panel and Rear I/O (P2) Available