Inspection
check and evaluate to a quality control value.
See Also: Inspection Systems, Inspection Services
-
Product
Thickness and Flaw Inspection
MultiScan MS5800
-
Eddy current testing is a noncontact method used to inspect nonferromagnetic tubing. This technique is suitable for detecting and sizing metal discontinuities such as corrosion, erosion, wear, pitting, baffle cuts, wall loss, and cracks in nonferrous materials.
-
Product
Leadframe Inspection Machine
IV-L200
-
The IV-L200 is a leadframe inspection machine ideal for measuring leadframe dimension and pitch. Aside from identifying leadframe warpage, it is also used to detect bent or skewed leads as well as surface defects such as scratch, ink, and contamination, among others.
-
Product
Visual Visual Inspection Device
IP-3000
-
Our visual visual inspection device Inspection Pro IP-3000 is an inspection device that quickly and accurately inspects the mounting board, which is constantly evolving, and judge whether it is good or bad without omission.
-
Product
Signal Integrity Test Products
RoBAT RCI
-
*TDR & TDT, Measurement Capabilities*Impedance, Skew, Backdrill measurements*Automated Optical Inspection*DC Electrical Test*Now available with 4 heads*24 port (1 port per channel) TDR/TDT unit*Future capabilities – Fully automated VNA test (4 port S-Parameter Measurement)
-
Product
Vision Inspection System
Vision Station
-
Design and manufacture vision inspection system for SOT, SOD, TO, DPAK, SOIC, TSOP, SSOP, QFN/MLP, ODFN and LED inspection.
-
Product
Peeling Tester
BN-3
-
Shanghai Dean Electrical Co., Ltd
Executive standard: GB/T4074.3-2008/IEC60851-3;Inspection standard: JB/T4279.6-2008Used to measure the film adhesion property of enameled round wires with nominal conductor diameter of 1.0mm and below;High-end SCM control is used;Set arbitrarily the number of twist;LED would automatically display the number of twists;Twist counter performs accurate and reliable counting;High-strength steel scraper would complete sample scarping at once, easy to operate and use.
-
Product
Push Cameras
-
Advanced Inspection Technologies Inc.
AIT's Pipe Inspection cameras and push cameras are designed for the toughest industrial inspection. Our different pipe inspection camera systems easily bends around tight radius pipes, heat exchanger tubes, oil lines, drain lines and more. See inside industrial pipelines as small as 13.0mm (1/2 in) diameter and up to 200 meters (600 Ft) in Length.
-
-
Product
Analytical Gear Inspection Machine
KNM 2X / 5X series
-
Analytical gear inspection machine for workpieces up to Ø 650 mm. Measuring machines for spur and helical gears, rotors, bevel gears, gear tools, shafts etc. Ultimate highly precise measurement of smaller size gears in the lab or on the shop floor - no foundation required.
-
Product
PDP Driver/Function Inspection System
SRV
-
*Greatly Reduced Testing Tact Time*Cutting-Edge Inspection*Easy Operation
-
Product
Thickness and Flaw Inspection
NORTEC 600
-
Olympus converges its latest advancements in high-performance digital circuitry and eddy current flaw detection into one compact and durable portable unit—the new NORTEC® 600. With its crisp and vivid 5.7 inch VGA display and true full-screen mode, the NORTEC 600 is capable of producing highly visible and contrasting eddy current signals in any lighting condition.
-
Product
Probes for Tube Inspection
-
Probes for tube inspection are lightweight but solidly constructed eddy current, remote field, magnetic flux leakage, and IRIS ultrasound. These probes are used for ferromagnetic or non-ferromagnetic tube inspection applications.
-
Product
Optical Inspection
-
Typically, in a standard PCB manufacturing facility, there will be a department where people perform inspection of PCBs through a manual processes, such as visual inspection with magnifiers, microscopes, etc...
-
Product
Baggage and Parcel Inspection
-
Inspection of bags and parcels has to be effective, efficient, and meet the toughest regulatory requirements. Rapiscan® Systems products deliver on both levels.
-
Product
Ultra High Performance 3D CT System
UltraTom
-
3D micro-tomography (CT Scan) and nano-tomography. Modular system with multiple imagers and x-ray generators. Experimentations possible in-situ. Large volume Inspection and manipulation volume.
-
Product
Inspection System
CIX100
-
The OLYMPUS CIX100 inspection system is a dedicated, turnkey solution for manufactures who maintain the highest quality standards for the cleanliness of manufactured components. Quickly acquire, process, and document technical cleanliness inspection data to comply with company and international standards. The system’s intuitive software guides users through each step of the process so even novice operators can acquire cleanliness data quickly and easily.
-
Product
Manual Spin Rotary Table for Optimal Circular Geometry (TIR) Inspection
TruMotion
-
Rotary Precision Instruments UK Ltd
Inspect circular components in a shop floor environment whilst maintaining world class accuracies more commonly seen in the standards laboratory.
-
Product
Fiber Inspection Probe
FIP-920
-
FIP-920 Fiber Optic Inspection Probe combines a 3.5” high definition TFT LCD display, provides a detailed image of fiber end-face, zoom in/out feature make it easy to identify the smallest particles, scratches. With the attached SD card memory, you can capture/record the live end-face image, the image file can be reviewed/transferred via SD card reader or USB cable. Up to 8hrs battery working make it possible to inspect the fiber end-face at any time and any place.
-
Product
Magnetic Particle Inspection
NDT
-
DCM Tech offers a comprehensive selection of Magnetic Particle Inspection machines for non-destructive testing (NDT). Easily and quickly detect internal and subsurface damage on critical parts. Contact DCM to speak to your regional Technical Specialist about adding an MPI to your shop.
-
Product
Step & Repeat Non-Contact Inspection System for FPC and PCB
OHT-Ⅴ
-
*Space-saving design and highly efficient and high-speed inspection, with top and bottom slider structure*Roller head enables to handle the reverse imposition.*Easy operation by new alignment mechanism*The machine handlingPCB is called "WSR"
-
Product
Acoustic Microscope
AMI D9650
-
Specifically designed to serve as a general purpose tool for failure analysis, process development, material characterization and low volume production inspection, the capabilities of the D9650 are truly unmatched. Representing the latest in C-SAM acoustic micro imaging, the D9650 delivers the unrivaled accuracy and robustness that you would expect from Nordson Test & Inspection instruments, plus improved electronics and software that raises the performance level for laboratory acoustic microscopes.
-
Product
Inspection & Alignment Services
-
As a leading provider of precision measurement services for power generation and turbo-machinery, API has the professional experience necessary to minimize the overall downtime of the outage or rebuild schedule. The ability to fully utilize API’s precision measurement capabilities, combined with experienced Service Engineers in the turbine alignment process, differentiates API for complex alignments.
-
Product
Automatic Flight Inspection System
AT-920DG
-
Airfield Technology is pleased to announce the availability ofa new product, the AT-920DG Automatic Flight InspectionSystem.The new AT-920DG system combines the unique groundbasedinspection capability of our original AT-920 with theproven DGPS positioning system and WinFIS flight inspectionsoftware from our larger, dual equipment AT-930DG system.
-
-
Product
Hand-held Fiber Inspection Microscopes
-
The WL-C series hand-held fiber microscopes use coaxial illumination to provide users with maximum detail. It easily can detect the finest scratches and contamination, making it ideal for critically inspecting polish quality.
-
Product
IoT Data Inspection App
Data Explorer
-
he Application Data Explorer allows you to easily explore, aggregate, and analyze historical data across all of the devices in an application.The data explorer can be accessed through the "Data Explorer" link in the Application navigation bar: control the time range, resolution, and aggregation of the data. determine what devices and attributes we are gathering data from. displays the data in various ways (in graph form, in table form, or in aggregation form)
-
Product
Bulkflow X-Ray Inspection System
-
Designed to be integrated into line with optional reject stations, the Bulkflow X-ray System is perfect for loose and free flowing products. Offering a good detection levels on a wide range of contaminants including all metal, bone, glass and dense plastics.
-
Product
(AOI) Automated Optical Inspection Systems
-
For automated defect detection and high-accuracy measurements. VisionGauge Online High-Speed AOI systems are perfect solutions for demanding high-throughput, high-resolution applications. These systems are perfect for a wide range of applications including MicroElectroMechanical systems (for MEMS inspection or MEMS measurement), semiconductor & discrete device inspection and measurement.
-
Product
Lab Inspection & Testing Services
-
Our lab services use advanced techniques to thoroughly inspect components for manufacturing flaws before assembly. We work with clients in the aerospace, automotive, oil & gas, manufacturing, wind energy, and various other industries to ensure their materials and components are free from defects that were introduced in forging or manufacturing processes.
-
Product
X-ray Inspection Performance
MXI Quadra 7
-
Ultimate image quality and magnification, Quadra 7 reveals quality defects as small as 0.1 µm. Ideal for root cause failure analysis, wire bond integrity checking, component cracking, MEMS inspection and wafer level components including TSV and wafer bumps.
