-
Product
Industrial SSD
-
Advantech SQFlash industrial embedded SSD solutions combine storage expansion modules including NVMe and SATA SSD with value-added features or services such as data security, data encryption, management software, and design-in service, providing a total solution for all kinds of embedded applications.
-
Product
SSD Test Systems
MPT3000ES / MPT3000ES2
Test System
Using the same high-performance electronics and powerful software as all products in the MPT3000 family, the MPT3000ES and MPT3000ES2 engineering stations feature a small footprint configured to test up to eight SSDs in parallel. The system's small size and ability to plug into a standard AC outlet enable users to conduct program development and interactive device debugging in either office or lab settings.
-
Product
SSD Life
-
SSD Life analyzes how actively you use your solid-state drive and uses a special algorithm to calculate its estimated lifetime. Of course, the date of the lifetime expiration is corrected depending on how intensively you keep using your drive.
-
Product
PATA SSD
-
Solid State Drive that uses the legacy Parallel Advanced Technology Attachment (PATA/IDE) interface, designed to replace older mechanical hard drives in legacy systems.
-
Product
SQFlash 660 Series Semi-Industrial 2.5" SATA SSD
SQF-S25 660
Solid-State Drive
SATA 3.2 Compliant, Supports LDPC & RAID ECC. SMART, SQLog & SQAnalyzer for diagnosis, GUI management tool & software API package. -20 to +75 °C operation temperature, and can withstand peak up to -40℃ or 85℃ for 1hr.
-
Product
MO300 MSATA3 RunCore Consumer SSD “Sprinter Series”
-
RunCore Innovation Technology Co. Ltd.
mSATA3 (6Gbps) Solid State Drive (SSD) is a high capacity solid-state flash memory product that complies with the SATA 6Gbps standard and is functionally compatible with a SATA hard disk drive.
-
Product
SQFlash 840 Series Industrial 2.5" SATA SSD
SQF-S25 840
Solid-State Drive
Compliant with SATA III and SATA v3.2 standard, Support AES256 and TCG-OPAL Compliant. Support HW Write Protection, Support LDPC with RAID ECC. GUI management tool & software API package, High Endurance sTLC Product Selection.
-
Product
mSATA SSD Carrier
SD3-GLISS
-
SD3-GLISS fits into any CompactPCI® Serial peripheral slot that is PCIe enabled. Hardware RAID operation is supported, running with an enhanced ARM-based processor to offload the host CPU.
-
Product
PXIe SSD Storage Unit
DM-4M.2-3U
Data Storage
The Big River™ DM-4M.2-3U PXI Express storage unit provides up to 3.8TB* of M.2 SSD storage capacity. With a PCIe x8 Gen3 host interface, the DM-4M.2 delivers high-speed data rates for sequential writes of 3.25GB/s** and sequential reads of 3.41GB/s** to PXI Express based systems. The single slot design of the DM-4M.2 increases the availability of valuable chassis space, allows for maximum storage flexibility. The DM-4M.2 complies with PCIe Gen3 protocol standards. The product is commonly used in the industrial control, test and measurement fields. The DM-4M.2 operates under Windows, Linux, Unix, Solaris and VxWorks.
-
Product
SQFlash 840L Series Industrial 2.5" SATA SSD, Enterprise Series
SQF-S25 840L
Solid-State Drive
Compliant with SATA III and SATA v3.2 standard, 5Y DWPD >1 High Endurance. Power Loss Protection, AES-256 Support & TCG-OPAL Compliant. Support LDPC with RAID ECC, GUI management tool & software API package.
-
Product
2.5” SATA3 Rugged SSD – RunCore Military “InVincible Series”
-
RunCore Innovation Technology Co. Ltd.
RunCore Military products are one of the best SSD in the market. With its high reliability and excellent features, this 2.5” Rugged SATA III SSD is designed with outstanding performance and wide range of applications. This is the best product for rugged computer, avionics, aerospace, naval and even in high security. The connector is using R-SATA Amphenol best use for aerospace and with 100,000 x mating cycles.
-
Product
SSD Test Systems
Test System
Enables Rapid SSD Development and Production Ramp with Flexible Test Solution In the high-growth and highly competitive SSD market, a test system that supports multiple protocols can eliminate the need for retooling and achieve faster transitions from one product version — or one product generation — to the next. Advantest SSD Test System allows manufacturers to rapidly grow their product portfolios while remaining adaptable to the many changing needs of the evolving SSD market. This tester improves users’ engineering efficiency with powerful, easy-to-use software tools and a revolutionary multi-protocol hardware architecture, enabling accelerated SSD product development and a faster time-to-manufacturing ramp.
-
-
Product
2.5'' SSD
-
A standard, compact storage drive size designed to fit the same bays as traditional laptop hard drives, measuring roughly 2.5 inches in width.
-
Product
Industrial 2.5" SATA SSD, FIPS 140-2 Certified
SQFFS25 840F
-
Compliant with SATA III and SATA v3.2 standard, Support LDPC with RAID ECC. Support AES-256 and FIPS verify, Shock resistance, anti-vibration.
-
-
-
Product
2.5” U.2 PCIe NVMe RunCore Embedded SSD “Elite Series”
-
RunCore Innovation Technology Co. Ltd.
2.5” U.2 PCIe3 NVMe Solid State Drive (SSD) is a high capacity solid-state flash memory product that complies with the PCIe Gen 3 standard and is functionally compatible with a PCIe protocol.
-
Product
SQFlash 660 M.2 2242 SATA SSD, SATA Gen. 3 (6.0Gbps)
SQF-S4B 660
Solid-State Drive
SATA 3.2 Compliant, Supports LDCP & RAID ECC. SMART, SQLog & SQAnalyzer for diagnosis, GUI management tool & software API package. -20 to +75 °C operation temperature, and can withstand peak up to -40℃ or 85℃ for 1hr.
-
Product
cRIO-9803, Up to 480 GB SSD Expansion Module for CompactRIO
786677-01
Module
Up to 480 GB SSD Expansion Module for CompactRIO - The cRIO-9803 provides a bus-powered USB SATA bridge to a full-length mSATA solid-state drive (SSD). This module uses a USB Type C connector with integrated cable retention. It also works with devices that feature other types of USB connectors, such as CompactRIO Single-Board Controllers, Industrial Controllers, and PXI Controllers. The cRIO-9803 is available in 64 GB SLC for high endurance in rugged environments, in 480 GB MLC for high-capacity data storage, and for use with a customer-supplied SSD. Additionally, the cRIO-9803 features the same rugged shock and vibration ratings as other CompactRIO modules and can be mechanically connected to a controller for integration using mounting accessories.
-
Product
Arowana PCI Express SSD Board™ Family 2U x16 (x8) PCI Express Gen 3 SSD board
-
The Arowana PCI Express SSD board incorporate up to eight independent x4 PCI express Gen 3 SSDs. The operating system recognizes each SSD as an individual hard disk and can combine them in RAID0 to gain maximum performance.
-
Product
SQFlash 720 M.2 2242 PCIe/NVMe Gen.3 X4 SSD
SQF-C4M 720
Solid-State Drive
NGFF M.2 2242 SSD (M key) Compliant with PCIe Gen. III x4 interface and NVMe 1.3 Support LDPC with RAID ECC, TRIM supported, GUI management tool & software API package.
-
Product
2.5” SATA3 – RunCore Consumer SSD "Sprinter Series"
-
RunCore Innovation Technology Co. Ltd.
Standard 2.5” SATA3 (6Gbps) Solid State Drive (SSD) is a high capacity solid-state flash memory product that complies with the SATA 6Gbps standard and is functionally compatible with a SATA hard disk drive. It is a standard SATA product that supports both 7mm and 9mm thickness.
-
Product
SSD
MSATA SSD (MLC) 3ME4 Series
-
Innodisk mSATA 3ME4 is SATA III 6.0 Gb/s flash based disk, which adopts latest Marvell NAND controller with Innodisk’s exclusive L³ FW architecture. The upgraded L³ FW architecture, combining Innodisk signature 4K mapping algorithm L² FW architecture with powerful LDPC technology, makes 3ME4 series have outstanding high IOPS, better data integrity and extended lifespan through reducing the bad block number happening. Built-in thermal sensor, and iData Guard ensure data integrity and reliability of mSATA 3ME4 for industrial applications.
-
Product
MO300 MSATA3 RunCore Embedded SATA3 “Elite Series” SSD
-
RunCore Innovation Technology Co. Ltd.
MO300 mSATA3 utilizes high-performance SATAIII SSD controller and NAND flash, with or with no DRAM buffer to support power failure mechanism. This series SSD compliant with Serial ATA Revision 2.6/3.1 specification, compatible with 6.0Gbps, 3.0Gbps and 1.5Gbps interface rate and support Native Command Queuing (NCQ) up to 32 commands. As a standard SATA drive, it can support mainstream OS, such as Windows/Linux/Unix/Solaris/ Mac OS and so on.
-
Product
M.2 SATA SSD Carrier
SD4-SWEEP
-
SD4-SWEEP fits into any CompactPCI® Serial peripheral slot that is PCIe enabled. Hardware RAID operation is supported, running with an enhanced ARM-based processor to offload the host CPU.
-
Product
SQFlash 920 U.2 2.5" SSD (SFF-8639) PCIe/NVMe Gen.3 X4
SQF-C25 920
Solid-State Drive
GUI management tool & software API package, TRIM、AHCI supported. U.2 (SFF-8639) PCIe/NVMe 2.5" SSD, Support LDPC with RAID ECC. Compliant with PCIe Gen.3 x4 interface and NVMe 1.3.
-
Product
Industrial FIPS M.2 2280 PCIe/NVMe Gen.3 X4 SSD
SQFFCM8 920F
-
Compliant with PCIe Gen.3 x4 interface and NVMe 1.3, NGFF M.2 2280 SSD (M key) TRIM、AHCI supported, Support AES-256 and FIPS verify.
-
Product
Squid PCI Express Carrier Board™ for M.2 and NGSFF (NF1) SSD Modules
-
Amfeltec Squid PCI Express Carrier Board™ for M.2 and NGSFF (NF1) SSD Modules
-
Product
SQFlash 640 Series Industrial 2.5" SATA SSD
SQF-S25 640
Solid-State Drive
GUI management tool & software API package. Shock resistance, anti-vibration and low power consumption. Supports Fragment Writing Technology and Flush Manager, Supports LDPC and RAID ECC. Compliant with SATA III and SATA v3.2 standard.
